-
Sale!
VTT S55 / N55 Crank Bolt Capture
$129.00$119.99The VTT S55 crank bolt capture. slips over the head of the crank bolt fully encapsulating it, and locks it to the crank hub, meaning it cannot back out no matter what. -
Sale!
VTT Billet BMW Crankcase Breather
$149.00$119.99VTT BMW Billet One Way Crankcase Breather VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, and remove crankcase pressure, all while adding a cool look to your engine bay. Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one-way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.This breather will fit MOST NOT ALL BMWs with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54, S85, S63, S63TU, N63. There are factors that may stop it from fitting your platform such as valve cover style etc.
-
VTT BILLET BMW N54/N55/S55 Crank Seal Guard
$79.99 – $169.99VTT BILLET BMW N54/55 Crank Seal Guard.
It is a well-known issue on the BMW N54/N55/S55 platforms that your serpentine belt can fail for various reasons, when this happens you have a high chance of the belt getting sucked behind the front damper, and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure, even if you do not lose the engine it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT Even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. -
VTT Billet / Silicone N54 coolant hose kit
$29.99 – $439.99VTT is proud to announce our N54 Billet/Silicone coolant hose upgrade kit! The factory plastic coolant connectors are prone to breaking over time, and the hoses are just your standard run of the mill coolant hose. We wanted to provide an upgrade to both areas. What we came up with is Billet 6061-T6 connectors anodized black for corrosion resistance, and 6 ply silicone molded silicone hoses in the factory shapes.
-
N54 Aluminum Turbo Outlet
$229.99 – $319.99Looking to get the most efficient turbocharger operation out of your N54-powered BMW? The best way to do this is to remove all restrictions from the inlet and charge the tract. The factory charge pipe has a very small 1" opening and a poorly designed Y section that couples the two banks into one before entering the intercooler. This VTT N54 Aluminum outlet gets rid of those restrictions and provides a full 1.5" from the turbochargers to a smooth Y transition into a 2.5" outlet to fit most aftermarket intercoolers. Do not be fooled by companies trying to sell you oversized 2" charge pipes, these are not going to pick up any power, and will kill velocity. The smallest diameter you can run while still providing adequate flow is always best for flow velocity and reducing time to TQ. -
Sale!
VTT Billet Check Valves
$24.99 – $29.99VTT CNC Billet check valve that can be used for a variety of uses including a vacuum/boost check valve when removing the stock PCV system, and still wanting to run vacuum to the crankcase. Rated at over 100 psi, with a cracking psi of .25psi. -
Sale!
VTT Oil Block Off Plate
$60.00$54.99VTT CNC Oil Block off the plate. Use these when you want to delete the stock coolers lines, and run two -10 fittings for your aftermarket oil cooler set up. These provide full flow and get rid of any restrictions. We offer these in THREE colors to match out other N54 billet engine parts such as Oil Cap, PS cap, and Oil Filter housing cap. Available as plate only, with -10 fittings, or -8 fittingsWe suggest running an aftermarket thermostat with a block-off plate to help warm the car up quickly.
-
VTT Billet CNC oil caps add a nice touch of quality to an otherwise plastic-filled BMW engine bay. We offer these in red, black, blue Purple, gold, and clear anodizing. Made from 6061-T6 aircraft aluminum with stainless steel locking tabs. Fits ALL BMWs with a two-prong locking tab design, including but not limited to. N54, N55, S55, S54, N20, S63, S63TU, M54, B58, N63, S65, S85, M57 DieselTHIS CAP DOES NOT FIT, B58TU, S58, A90/91 SUPRA, THIS ONLY FITS 2 PRONG CAP STYLE
-
N54 OEM Replacement Kit (Fits all N54 models LHD & RHD)
Starting At $1,049.00WHP Level supported (with proper fuel, upgrades, and tuning) Stock - 500WHP -
Sale!
VTT Modular PCV/Catch Can (Ready to install kits)
$219.99 – $449.99VTT is proud to announce a ground-up system designed to give the end-user complete control over their valve cover/ PCV set up. Tired of being told you will run two -10 lines from your VC to your Catch Can? So were we. Now you can run them any way you want, including complete VTA, oil cap one-way breather, etc. Nothing on the market comes close to the versatility of this setup, and it truly is the ULTIMATE Valve cover, PCV combo, or Valve cover, or PCV set up. You choose how many or how few you want to run. Check out this video highlighting some of the features then rea. -
Sale!
VTT N54 Waste Gate Repair Kit / Rattle Fix
$109.99$89.99This kit comes with 1 set (both turbos) of Stainless Steel wear matched bushing, and flapper assembly, Wastegate arm, rod end, and Stainless steel 8mm C clip. -
VTT Ignition Coil Kits
$159.99 – $209.99VTT is proud to offer ignition coil replacements for the N5X platforms, as well as B5X, and many VAG platforms. We started our quest for coils by contacting multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once we were satisfied with the testing, we had the best performing coils made to our colors and specs. We offer these coils as complete sets for the N54, B58/S58, and the VAG platforms in either 4, or 5 cylinders. We also offer upgraded plugs which are highly recommended to change when doing coil replacements These coils come in 3 colors, Red, Black, and Blue, and are not simply an aesthetic upgrade but match or exceed the factory secondary spark energy. The VAG coil, is extremely potent, and the tester was so impressed with it compared to the factory coil, he called it a "BEAST" of a coilNote: To extract maximum performance from VTT coils minor tune changes are required to optimize dwell periods. See recommended Dwell times below
-
Buy all 5 Fittings and Save $6. This product includes all of the fittings listed below.
-
A well-known issue with the N54 and early N55 with Hydraulic power steering is the plastic pulley either hitting the subframe or simply breaking on its own. This can cause the belt to be ejected from the pulley, and leave you stranded with no serpentine belt. To top it off, if you continue to run the vehicle with the belt off, you also have a good chance of sucking the belt into the engine through the front seal. Put an end to the dreaded plastic PS pulley issues with our 100% Billet Aluminum PS pulley. We make these from 6061-T6 aluminum and anodize them in one of 4 colors (Black, Red, Blue, and Clear) for a great look, and long-lasting finish. These weigh 11Oz, very close to the weight of a stock pulley, and are lighter than the cast aluminum versions on the market.
-
VTT B58 Gen-1/TU Billet One Way Crankcase Breather
VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW B58 applications (Supra is different please go to our Supra section if looking for a supra breather) With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. -
Sale!
VTT Cold Side Charge Pipe
$89.99 – $119.99Whenever upgrading your N54 we suggest going to a true BOV like a Turbosmart Raceport. This cold side charge pipe allows you to do that while getting rid of the prone to cracking plastic charge pipe, and plastic DV's. If you do want to keep the DV set up, we also offer a DV charge pipe. Also available for N55 with no bungs at all, as the DV is on the turbo. Looking for the Charge Pipe & BOV Combo? Click Here -
VTT Modular Cast Aluminum CNC Valve Cover Kit
Starting At $684.00This is a cast version of our incredibly popular Billet CNC valve cover. Instead of starting with a billet piece of aluminum. This cover is cast. then it goes through the same machining process as our billet VC. This keeps the cost down and makes for an awesome valve cover that eliminates the factory plastic cover, and its cyclonic PCV system. This also allows you to run any of our modular PCV fittings, crankcase breather, vacuum relief, billet banjos, catch can kits, etc. This truly is the best bang for your buck Valve Cover upgrade on the N54 market. High quality, low price, great looks, no cracking, and unlimited PCV plumbing options makes this a no brainer upgrade! We offer three color options. Black Wrinkle and Red Wrinkle Powder coat which will hide all casting imperfections, and look the best. There is no charge for powder coating options. We offer custom colors powder coat, at $150. (Please note: Take 2-4 weeks for custom colors) -
Sale!
VTT CNC ORB Low Profile High Flow Banjo Fittings
$50.00$44.99Made from CNC 6061-T6 Aircraft aluminum anodized black for a long-lasting finish. -
N54 Silicone Inlets
$329.99 – $339.99VTT silicone inlets are the premier choice for your N54 inlet needs. Made from high-quality, wire-impregnated silicone, these inlets are a full 6mm thick and can withstand even the harshest underhood conditions. -
NGK 94201 Spark plug set for all S58/B58/48 applications, and ALSO for N54/55 running the new B58 coil upgrade. We recommend these for running 100% e85, and high boost on many BMW applications including N54, N55, S55, if you upgrade to the B58 coils. These are also great maintenance replacements for your S58/B58/48 powered vehicle at a much better price than most. Plugs can be bought as a set of 6. You can add pre-gapping for an additional $25
-
Sale!
VTT VAG/BMW/TOYOTA Billet Wheel Spacers
$19.99 – $34.99VTT is proud to offer billet wheel spacers for most VAG, BMW, and the A90/91 Toyota Supra platforms. These spacers are CNC machined from 6061-T6 aluminum and hard anodized black for long corrosion-free life.THESE ARE SOLD INDIVIDUALLY, FOR ONE AXLE ORDER TWO FOR A COMPLETE SET ORDER FOUR.
ANYTHING OVER 5MM WILL REQUIRE LONGER BOLTS OR STUDS, YOU CAN CHOOSE TO ADD A VTT WHEEL STUD KIT FROM THE OPTIONS.
PLEASE DOUBLE CHECK YOUR BOLT PATTERN, AND HUB BORE BEFORE YOU ORDER. INSTALLED SPACERS CANNOT BE RETURNED!
-
NGK 97506 Pre-Gapped Spark Plug Set
$104.99 – $139.99NGK 95706 Spark plug set required for running 100% e85, and high boost on many BMW application including N54, N55, S55, etc. Plugs can be bought as a set of 6. You can add pre-gapping for an additional $25 -
Sale!
VTT N54 Crank Bolt Capture
$129.00$119.99The VTT N54 crank bolt capture. slips over the head of the crank bolt fully encapsulating it, and locks it to the crank hub, meaning it cannot back out no matter what. -
VTT “GC” N54 to B58 Coil Conversion Kit
From: $319.99VTT is proud to offer its very own Game Changer N54 to B58 Coil conversion kit for the BMW N54 platform. The N54 has notoriously had ignition problems with the factory coils, while aftermarket upgrades do exist, they can be bulky. While factory coil upgrades such as S55, and our own N54 coil upgrades do provide more spark, the BMW B58 ignition coils are extremely robust and can support well over 1000WHP with no issues. This means a plug-and-play affordable solution that fits like stock, and looks AMAZING doing so! We designed our own 6061-T6 Billet bracket in a plethora of colors including matching shades for every N54 Valve Cover we offer (even the cast wrinkle), and we even went as far as to have some cut-out of 100% carbon fiber sheet for the unmistakable look, and lightweight that only carbon fiber can offer! This means you can mix and match the color of the bracket with coil color, with VC color to truly tailor your engine bay to look exactly how you want it to!Note: Flash setting changes are required when installing the conversion kit to ensure the proper function of the B58 coils with N54 DME. This can be found in most all flashing software settings such as MHD, Bm3, etc.
-
S55 “GC” Turbocharger Upgrade Kit
From: $3,859.99WHP Level supported (with proper fuel, upgrades, and tuning) Stock-800WHP VTT S55 GC Turbochargers. GC stands for "Game Changers" and that is exactly what these do! They bring a fully new casting Stainless Steel turbine manifold/housing, all new compressor housing with single piece high flow inlet, as well as our tried, and true V2 GC CHRA with a Mar-M246 GTX28 profile turbine wheel, and custom compressor wheel. These turbos have NO core charges, keep your stock turbos, sell them, hold them if you want to go back to stock, etc. The turbos will come with custom VTT silicone inlet hoses to mate up with all inlets on the market making them 100% plug, and play. There is no better, more powerful, or well thought out upgrade on the market at any price point! -
VTT is proud to offer our billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap, and the need for a special tool for removal, while adding some pop, and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. We also designed these caps to complement our Billet Oil caps, and upcoming Billet Power Steering caps, so all 3 will have the same design. Order all 3 - Oil Cap, Oil Filter housing Cap, and Power steering cap for $175 - 10% savings We offer these caps in 4 colors - Red, Black, Blue, and Clear anodize. The cap has a 19mm hex for easy installation, and removal, and includes a new sealing O-ring, and a small O-ring for the oil filter cage.
-
VTT VC, and Catch can kit. ALL YOU NEED
$1,219.99 – $1,769.99One of the most common emails we get here at VTT is regarding VC set up with catch cans, and which fittings to pick, how to set it up, etc. This kit does away with all of that, and we give you exactly what you need to g to external PCV on the N54 from the experience of installing hundreds of kits. All we need from you is some basic info. Valve cover Choice: Billet or Cast Color: For cast red or black wrinkle, for Billet Black Clear, Red Blue or Custom Fittings style: Basic style steel fittings (cost-effective, look good), VTT Low Profile banjo fittings (very clean look, more expensive) If you have any specific requests or info you want to pass on to us, please add it to the order notes. If we have questions will we reach out to you? -
N54 CHRA REPLACEMENT OEM / STAGE 1
Starting At $424.00Need N54 turbo replacements, don't have full turbo replacements in your budget, like wrenching on your own stuff? If you answered yes to any of those questions, the VTT N54 CHRA replacements are perfect for you! -
Replacement Gasket for VTT Valve Covers
$29.99 – $64.99Need to replace the gasket on your VTT Aluminum VC? Simply choose your model from the dropdowns to ensure you get the correct version. -
S55 Turbocharger Install Kit
$309.99Everything needed to a successful install without having to make a trip to the dealer. -
VTT is proud to offer our billet replacement for the factory plastic Power steering cap. This cap does away with the weak plastic cap, while adding some pop, and color to your engine bay. These Power Steering caps retain ALL of the factory provisions including dipstick, and vent hole We also designed these caps to complement our N5X Billet Oil caps, and N5XBillet Oil filter Caps caps, so all 3 will have the same design. Order all 3 - Oil Cap, Oil Filter housing Cap, and Power steering cap for $175 We offer these caps in 4 colors - Red, Black, Blue, and Clear anodize
-
VTT is proud to offer our billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. These Coolant caps retain ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap We also designed these caps to complement our N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap and so all 4 will have the same design. We offer these caps in 4 colors - Red, Black, Blue, and Clear anodize, as well as a choice of custom anodize at a cost of $100 extra.
-
One Ethanol Racing Fuel
$69.99 – $559.99Please note: Due to heavy increases in freight costs we have had to raise prices by $50 on 54-gallon drums, and $15 on pails.
VTT is proud to be the West Coast dealer for One Ethanol racing fuel.
We have two blends available in 5-gallon pails and 54-gallon drums. See below for descriptions of both fuels
Fuel is available for local pick up only unless you email, and make arrangements for freight shipping. Be aware fuel is considered hazmat and the freight charges are equal to or more than the fuel in all instances. Fuel CANNOT be shipped normal shipping methods such as UPS, FED EX, etc
-
A plug and play BOV option for your N54. This kit comes with everything you will need to replace your undersized factory DV with a high quality Turbosmart Race port.
-
N55 Stage 1 JB Upgrade Kit (NEW)
From:$1,199.00$1,109.99WHP Level supported (with proper fuel, upgrades, and tuning) Stock – 425WHP -
Sale!
VTT Aluminum Outlet & Inlet Bundle Package
$559.98 – $659.98$475.98 – $560.98Save 15% on your VTT Silicone inlets, and aluminum outlets if you order them together! -
VTT N54, N55, S55, N20, B58 Billet Motor Mount Inserts
$169.99 – $449.99 -
N54 Stage 2 Kit (Fits all N54 models LHD & RHD)
From:$2,499.00$2,209.99WHP Level supported (with proper fuel, upgrades, and tuning) Stock - 625WHP -
Looking for a little extra clearance on your coolant tank fitting due to relocation for single turbo, forward-facing intake manifold, etc. This 90-degree fitting will allow you to run the hose straight down instead of straight out, and increase your clearance, and routing choices. Made of 6061-T6 and anodized black for a long-lasting finish. Comes with fitting, and 1 clamp.
-
VTT Billet Crankcase Breather replacement filter
$19.99 – $24.99Need a replacement filter for your VTT Billet Crankcase breather? You can order on here. We offer them in 3 heights, low 48mm, medium58mm, and tall 68mm. This is measured from base to top. The filter will include a new clamp. For reference: N54/55 mostly use the low A90 Supra use Medium Most Audi applications can fit a tall, but measure your filter before ordering. -
Sale!
VTT F/G Series B58 Engine Catch Can
$349.00$339.99VTT is proud to announce our F/G Series B58 engine catch can set up. This kit uses our already extremely popular modular catch can, and couples it with a custom CNC 6061 bracket, VTT CNC banjo fittings, VTT 5 ply silicone hose, and Push lock fittings. Install is simple, takes about 30 minutes to 2 hours depending on your skill level, and requires removing one factory hose to install the VTT hoses. Giving an OEM fit and finished when installed. Our kit stands out from others on the market by using high-quality AN fittings, and VTT Banjo adapters. G series fits all 2019+ G Series 3/4 BMW vehicles with the B58TU engine, F Series fits all 2015+ F3X series BMW vehicles with the B58 engine. May NOT fit all F series as some 2 series chassis may be different. -
The stock outlet adapter on the N54/55 is NOTORIOUS for cracking when removing. This Billet replacement ensures no leaks, and no more cracked adapters. Available in 6 colors! Black, Red, Clear, Blue, Purple, Gold
-
VTT Billet N54/N55 Vacuum/Boost Adapter
$49.99 – $64.99We are happy to release our BMW B54/N55 (Limited N55 Fitment) vacuum/boost adapter. These go inline with the Throttle Body fitting and provide a full boost/vacuum signal from the manifold. This fitting adds two 1/8NPT bungs to accept any fitting that has 1/8" NPT threads. You can choose options, 1/4" barb, as well as 1/8NPT plugs if you only want one barb, etc. These are perfect for running your PI off manifold pressure which is much more accurate than charge pipe, and they are also great for BOV running the proper size line without having to drill a hole in your manifold. These do space out any sensors etc giving inaccurate readings like some of the other brands do. They are made from 6061-T6 anodized black, with steel plugs, and Blue Anodized barbed fittings. You can choose to order in a few ways. You can choose straight or 90-degree barbs. Adapter alone - $40 Basic kit - 1 Adapter, 1 barb, and one plug, one vacuum cap, and one zip tie $45.00 Dual Barb kit - 1 Adapter, 2 barbs, one vacuum cap, and one zip tie $55.00 -
VTT is proud to offer a Titanium hardware upgrade for all our Billet and Cast VC's. This will come with M6x30 Ti bolts N54 /N55/S55/B58 Gen 1/ B58 TU it will be an Umbrella head with a 16.3mm head. These bolts weigh half as much as comparable steel hardware and look amazing. Colors to choose from will be Burnt, Black, and Natural (silver)
-
N54 Stage 1 Upgrade Kit (Fits all N54 models LHD & RHD)
From: $1,939.99WHP Level supported (with proper fuel, upgrades, and tuning) Stock - 525WHP -
VTT B58 Gen-1 PCV CAP
$139.99VTT Billet B58 Gen PCV Cap replacement. Get rid of your fragile Stock PCV Cap/Diaphragm -
VTT M14/M12 Titanium Wheel Stud kits
$159.99 – $319.99VTT is proud to offer Titanium wheel stud kits for the owner looking for the lowest possible unsprung weight while maintaining high strength, and good looks as all come with an amazing burnt finish. This kit is 60% lighter than factory steel studs and nuts with a total kit of 20 nuts, and studs being 3.1LBS. Sets of 10 are 1.55 lbs -
VTT is proud to offer our billet replacement for the factory plastic vacuum tanks that store vacuum from the pump and use it to regulate boost via the solenoids. The stock plastic can, and small plastic nipples on the stock cans have a tendency to crank over time, and if they leak you will get low boost, or no boost, and poor performance. These cans do away with the weak plastic cans while adding some pop, and color to your engine bay. These vacuum cans retain ALL of the factory provisions including mounting points but come with 90-degree fittings for easier routing of the lines We also designed these cans to complement our N54 Billet lineup - N5X Billet Oil caps, N5XBillet Oil filter housing caps, Billet coolant cap, Billet valve cover, billet oil cooler block off plate, and Billet Power Steering cap and so on. All will have matching color We offer these cans in 4 colors - Red, Black, Blue, and Clear anodize
-
VTT Billet BMW B58 Vacuum/Boost Adapter
$49.99 – $64.99We are happy to release our BMWB58 (Fits ALL B58 models including TU found in the A90/A91 Toyota Supra) vacuum/boost adapter. These go inline with the intake manifold fitting and provide a full boost/vacuum signal from the manifold. This fitting adds two 1/8NPT bungs to accept any fitting that has 1/8" NPT threads. You can choose options, Fitting by itself, 1/4" barb, as well as 1/8NPT plugs if you only want one barb, etc. You can choose straight or 90-degree barbs. Once installed it tucks perfectly under your engine cover. These are perfect for running your PI switch off manifold pressure which is much more accurate than charge pipe, and they are also great for BOV running the proper size line without having to drill a hole in your manifold. These do space out any sensors etc giving inaccurate readings like some of the other brands do. They are made from 6061-T6 anodized black, with steel plugs, and Blue Anodized barbed fittings. You can choose to order in a few ways. Adapter alone - $40 Basic kit - 1 Adapter, 1 barb, and one plug $45.00 Dual Barb kit - 1 Adapter, 2 barbs, $55.00 -
VTT Reinforced Universal Silicone Hoses
$9.99 – $14.99VTT offers silicone hoses in various Push-lock sizes, we use these for our catch can kits, but they are also suitable for coolant, vacuum, boost, etc. Do not use with fuel. We offer: -10 Push Lock 24", and 18" -8 Push Lock 24", and 19.5" -6 Push Lock 24" -
VTA Breather
$39.99Not available for single can external PCV Valve. -
Sale!
VTT External PCV Adapter fitting
$99.99 – $129.99Adapter fitting that is required to convert your N54 to external PCV if you want to keep your crankcase under vacuum at idle, and anytime you have a vacuum condition in your intake manifold. -
Sale!
VTT PCV Flapper delete
$58.00$54.99Made of 6061-T6 aircraft aluminum anodized black, comes with O-ring, and stainless steel holding clip -
N54 Stage 2+ Kit (fits all N54 models LHD & RHD)
From:$2,799.00$2,429.99WHP Level supported (with proper fuel, upgrades, and tuning) Stock - 675WHP -
Sale!
VTT S58 One Way Crankcase Breather
$162.00$119.99VTT G Series S58 Billet One Way Crankcase Breather
VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW G series S58 applications With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. -
Do you work on a lot of BMW engines from various platforms? Tired of having to adjust universal engine stand plates to fit your engine? Hate not having access to the flywheel end with the engine on the stand? We answered yes to all of those things, we made a tool for anyone that works on BMWs often, and wanted a strong bolt-on engine stand plate that keeps the flywheel end of the engine open! These engine stand plates are machined from a solid billet of 6061-T6 aluminum and anodized in 5 colors for long-lasting corrosion resistance. The engine stand plates currently fit the following engines, N54, N55, S55, B58, S58 with more to come! These are lightweight, and rated for over 1200 lbs! Key Features:
- Lightweight and strong billet 6061-T6, anodized for a long-lasting finish
- Direct bolt on to the intake side motor mount location
- Clears all accessories when installed for easy engine assembly when on stand INCLUDING flywheel or flex plate
- Provisions for location pin, and bar to spin the engine on the stand
-
N55 VR9 TurboSmart KOMPACT EM DV
$239.99 – $269.99VTT Is proud to offer the Turbosmart Kompact EM DV for the N55 The award-winning Kompact EM series Diverter Valves, are the world’s first truly plug and play Diverter Valves. Simply unplug and unbolt your OEM Diverter Valve, and install ours in its place. No adapters, hoses, or extra assembly required. All this while retaining complete OE control of the DV’s operation. -
VTT-FAB Billet Oil/Coolant Fittings, and block offs
$20.00 – $40.00Looking to fab your own turbo kit for BMW platforms, and need an easy solution to block off water lines, or create feed and drain fittings. Look no further, we offer a wide range of oil/coolant fitting options for most late-model BMW platforms. See the Full description below for a full part number breakdown -
VTT B58 GC/GC+ Turbocharger Upgrade
From: $1,769.99Support power level GC Stock-600WHP GC-MID Stock-650WHP (TU ONLY) GC+ Stock-800WHP Ready to take your B58 to the next level? Don't want to deal with core charges, long lead times, or restrictive factory housings? Look no further! VTT has you covered with our 100% new casting B58 “GC” "GC-MID" and "GC+" turbocharger upgrade. We start by keeping the great design elements of the factory B58 turbo and removing the not-so-great ones such as the small factory inlet area, bearing housing oil structure, thrust bearing, and anything else we saw that could be improved upon. With the basics covered, we stepped it up a level adding in proprietary VTT changes and finished off by having all these parts cast to OE quality. What this means for you is serious B58 power made easy; GC's are a drop in B58 turbocharger upgrade that supports over 600WHP while maintaining factory spool and all factory connections including oil, water, downpipe, and charge pipe. -
Sale!
VTT 15″/17″ Drag Pack Wheels for BMW/Toyota/VAG
$269.99 – $349.99Looking for a Lightweight, AFFORDABLE drag pack that looks amazing for your BMW, Toyota, or VAG platform? Look no further! VTT is proud to announce our lineup of Drag pack wheels for various BMW/Toyota/VAG fitments! We teamed up with Rota and had them open custom molds for us of their extremely popular Grid design. With these molds, we have an exclusive on 15X10, 17X10, and 17X4.5 wheels in our exact specs. The wheels currently are offered in the colors and sizes belowWe chose ET45 across the board on the rear as this is a universally easy offset to fit and can be made to fit just about any application with the use of a spacer. - VTT Spacers can be found here - https://vargasturbo.com/product/vtt-billet-wheel-spacers/
Wheels are priced EACH, meaning per wheel
PLEASE NOTE! CHECK FITMENT CAREFULLY. ANY WHEELS THAT HAVE HAD TIRES MOUNTED OR ARE DAMAGED DURING TEST FITTING ETC ARE NOT RETURNABLE!
Colors offered:- Satin Black
- Gloss Black
- Bronze,
- Gun Metallic
- 15x10 ET45 (wheel weight 16 lbs)
- 17x10 ET45 (wheel weight 19lbs)
- 17x4.5 ET-20 (wheel weight 16lbs)
- 15x10 ET45 - (wheel weight 16 lbs)
- 17x10 ET45 (wheel weight 19 lbs)
- 17x4.5 ET-20 (wheel weight 16 lbs)
-
VTT BMW/Toyota Conversion Wheel Spacers
$54.99 – $69.99Looking to convert your 5×120 or 5x112 vehicle to 5x114.3 wheels, or 5x120 wheels, and open up your wheel options DRAMATICALLY? We got covered with our VTT wheel spacer conversion kits. These kits are machined from billet 6061-T6 aluminum and anodized for a long-lasting finish. We then press in 10.9 class studs, with corrosion-resistant zinc coating for years of use. The spacer then accepts either a 5x114 wheel or a 5x120 wheel. The 5x114 use M14 studs, and the 5x120 use M12 studs. All the spacers have either a 66.6mm or 72.6mm Hub bore size to fit 99% of BMW applications. We offer Hub-Centric adapter rings to fit other wheel bore sizes No wobble bolts or redrilling here. We offer these in 4 thicknesses 15mm, 17.5mm, 20mm, and 25mm. The studs coming out of the spacer are 40″ total length and come with Black Lugnuts. Spacers that convert to 5x120 have M12 studs, ALL others have M14x1.5 -
S55 M3/M4 Silicone Charge Pipes Bundle
From: $389.99VTT silicone Charge Pipes are the premiere choice for your EBM Charge Pipe needs. Made from high quality, wire impregnated silicone, these inlets are a full 6mm thick, and can withstand even the harshest underhood conditions. -
Sale!
VTT-FAB M7 Copper Locking Exhaust Nuts
$3.00$1.49Are you building a single kit for the N54, N55, or S55 platform? M7 Locking exhaust nuts is not easy. So we made our own to combat the issue. These are the perfect solution to the problem of hard-to-find M7 lock nuts. Sold individually so order the number you need.Note: This is nuts ONLY Stud not included, by our extended M7 studs here - https://vargasturbo.com/product/vtt-fab-extended-m7-n54-n55-s55-b58-2-port-head-studs/
-
VTT is proud to offer our "OBD-LOCK" OBD port locking tool. This tool is made from billet 6061-T6 aluminum and is designed to completely lock out your OBD port from being accessed. This is useful for people who do not want dealers, techs, etc from accessing their OBD port, and possibly changing a tune, etc. This is also perfect for anti-theft prevention as it will not allow a would-be thief to hook up to the car's OBD port, duplicate a key, etc. The OBD-LOCK cannot be removed without physically destroying the OBD port if you do not have the proper tools. VTT uses 5 types of screw head designs for every 200 OBD-LOCKS made. This means that worldwide only 40 OBD-LOCKS are using the same head design. For each batch of 200, we redesign the screw heads meaning every batch of 200 OBD-LOCKS will use different screw heads and tools. Each OBD-LOCK sent has its head design chosen at random. After Extensive testing, we have found that our OBD lock fits EVERY SINGLE OBD port we have tried, this means it will fit every single OBD port currently on the market from a high-end BMW to a Ford F150 diesel. If you order one, and find it does not fit, PLEASE let us know.
FITMENT: We have TWO versions one for ALL GM vehicles and one for ALL NON-GM Vehicles. Please order the one you
-
N54 F-RB Turbocharger Kit
From: $2,759.99WHP Level supported (with proper fuel, upgrades, and tuning) Stock-850WHP VTT is proud to announce an All-new VTT GC redesign for 2021! The latest in our line of N54 VTT “GC” turbochargers. The GC “F-RB” or Full-Rebrand.This is an all-new take on the VTT N54 “GC” turbocharger, using 100% new parts throughout that is pure performance. Some of the new groundbreaking features include: All turbine side parts are now fully cast from 310 Stainless Steel for increased temperature resistance, and ultimate corrosion resistance. We also fully redesigned the turbine housing -the F-RB's have a much larger volute as well as a proprietary AR which will dramatically increase flow capacity, helping to eliminate stress on the turbine wheel. Fully redesigned compressor housings which now include V-band OR Hose Barb connection options (while our current stock of hose barb connections last). The CHRA’s are redesigned with new compressor wheels, bullet nuts, and better internal parts. These are new turbochargers from the compressor housing to the bearing housing, to the turbine housing, we had them engineered to fit in the stock N54 location, but provide the full flow of a much larger turbo, and providing a flow increase over the V2 “GC”.
With this all-new design, there is no other 850WHP capable turbocharger option on the market single or twins that can match the spool, ease of fitment, power, reliability, OR price of our GC “F-RB” turbochargers!
-
This is an easy way to order all 3 VTT Billet engine caps for Valve Cover, Power steering, and Oil Filter Cap. We offer these caps in 4 colors - Red, Black, Blue, and Clear anodize
-
Looking to fix the diff bolt issue on your F9X X3/4M? VTT has taken a 3 pronged approach by offering a triple solution, one part of the solution is the Rear diff bushing insert kit. This is pressed into the factory bushing and fills the voids in the bushing. This keeps the stock bushing ride compliance but removes any unwanted movement. These are sold as a kit Kit includes:
- One Billet Bushing insert
- Two 46mm Hardened Steel Washers
- One 12.9 M14 Bolt
- One M14 Lock nut
-
VTT Brake Kits Rotors/Hats only
$109.99 – $249.00This is for those running our brake kits that use our 11.75" or 13" Rotors that want to easily change between rotors for dedicated drag racing and street use. You can now buy Rotor/Hat Assemblies by themselves to switch between any of our 3 options- Scalloped (Recommended Drag use with parachute only)
- VTT HD ( Drag Use, Heavy Street duties, 1/2 Mile events, etc)
The price is for ONE ROTOR / OR ONE ROTOR/HAT ASSEMBLY
-
VTT Modular BILLET CNC Valve Cover
$1,379.99VTT is proud to announce a ground-up system designed to give the end user complete control over their valve cover/ PCV setup. Tired of being told you will run two -10 lines from your VC to your Catch Can? So were we. Now you can run them any way you want, including complete VTA, oil cap one-way breather, etc. Nothing on the market comes close to the versatility of this setup, and it truly is the ULTIMATE Valve cover, PCV combo, or Valve cover, or PCV setup. You choose how many or how few you want to run. Valve Cover Details:- 100% CNC 6061-T6 Aircraft aluminum construction
- Anodized in a variety of colors
- Lightweight; 9.7 lbs. (compared to 7.9 lbs for a stock cover - only 1.8 lbs difference)
- Gives the end-user true variety for setting up their Valve Cover and PCV System
- Lower pricing than other non-modular options on the market
- All Ports are fully Baffled to avoid unwanted oil from escaping
-
Soft bushings are the enemy of launching hard, and keeping your drivetrain together. The BMW Transfer Case bushings are notoriously soft, and that is the opposite of what you want when launching a car hard. You can replace the bushing with a solid one, but this is time-consuming usually requires lowering or removing the transfer case, and results in a lot of added NVH. The best path is simply to reduce the amount of flex of the factory bushing so you keep the nice manners when cruising around town, and at idle, but when its time to the launch the transfer case cannot move as it could without the insert. These come as a set of two with 2 bolts to keep them in place. Install time once you get to them is about 2-3 minutes. Could not be easier. Put some lube on them, push them in, and tighten the screws. These are a MUST for high-power G8X, and F9X X3/X4M Builds. All platforms they fit are below. Features:
- 6061- T6 aluminum construction
- Easy to install
- Fully reversible
- Do not add NVH
-
Looking to fix the diff bolt issue on your F9X X3/4M? VTT has taken a 3 pronged approach by offering a triple solution, one part of the solution is the front diff bushing inserts. These are pressed into the factory bushing, and fill the voids in the bushing. This keeps the stock bushing ride compliance but removes any unwanted movement. These are sold as a set Kit includes:
- Two Billet Bushing inserts
- Two 46mm Hardened Steel Washers
-
VTT/FF N54 Intake Manifold
$1,429.99THE FAB FACTORY MANIFOLD IS BACK at VTT!
-
VTT noticed a hole in the F9X X3/4M market for a high-quality, lightweight, NVH-friendly, and easy-to-install Diff Lock Down kit to improve diff stability under launching, and hard cornering. So we did something about it and went to work on a very innovative design that 100% positively locks the diff down from movement, while shielding it from adding a ton of NVH, and can be used with the stock diff, and subframe bushings. This design uses existing mounting points on the vehicle, you do NOT have to remove the subframe or the Diff to install. Simply remove 4 diff bolts, drill two holes in the subframe slightly bigger, install two M8 riv-nuts, and install the lockdown, you do not even have to move the exhaust. A typical install can be 30-45 minutes for someone who is experienced working on vehicles, an hour or two if you like taking it slow. You WILL need a Riv-nut tool to install the Riv-nuts, we provide a link below for what we recommend on Amazon. Features:
- Lightweight 1.5 lbs for the entire lockdown plate
- Uses FOUR connection points on the Diff, and three on the subframe for the ultimate in positive diff location, this will stop all diff movement on launch, saving your guibos, etc
- 100% Billet construction from 6061-T6 aluminum
- Anodized in 3 colors for corrosion resistance, a long-lasting finish, and good looks
- The subframe does NOT have to be removed for installation
- Uses all 10.9 and 12.9 grade hardware
- Does not add excessive NVH
- Positively locks down the diff to eliminate all unwanted movement under launches, acceleration, cornering, etc.
-
Sale!
VTT S55/N55 EWG BILLET CNC Valve Cover
$1,499.00$1,439.99VTT is proud to announce our S55/N55 EWG Billet Valve cover. We created these for the N/S55 owner who wants to add a great look to their engine bay while also getting rid of the stock plastic valve cover which can crack with higher mileage. These will work with the stock PCV hose or an aftermarket catch can, such as our S55 engine catch can kit. Valve Cover Details:- 100% CNC 6061-T6 Aircraft aluminum construction
- Anodized in a variety of colors
- Lightweight; 9.7 lbs. (compared to 7.9 lbs for a stock cover - only 1.8 lbs difference)
- Gives the end-user variety for setting up their Valve Cover and PCV System
- Only Billet option on the market
- All Ports are fully Baffled to avoid unwanted oil from escaping
-
Sale!
BMW/Toyota 5×112 to 5×114 Bolt Pattern Conversion Kits
$69.99 – $129.99Looking to convert your 5x112 M14x1.25 vehicle such as A90/91 Toyota Supra, and 2020+ BMW G-series to 5x114 to open up your wheel options? We got covered with our VTT wheel stud conversion kits. These kits are forged cold-rolled steel in 10.9 class, with corrosion-resistant coating for years of use, and convert your vehicle to M12x1.50 wheel studs which allow you to fit 5x114 wheels with no other changes.PLEASE NOTE – THESE STUDS WILL ONLY WORK IF YOUR WHEELS ARE DRILLED M14 THESE WILL NOT WORK FOR WHEELS DRILLED M12!
DO NOT USE ANY HUB-CENTERING SLEEVES WITH THESE CONVERSION STUDS, THE LUGS WILL CENTER THE WHEELS. THE USE OF A CENTERING SLEEVE MAY LEAD TO STUDS BREAKING. FOR INSTALLATION YOU MUST SNUG EACH LUG UP SLOWLY, AND IN A STAR PATTERN TO GET THE WHEEL CENTERED ON THE LUGS, FAILURE TO DO SO CAN ALSO LEAD TO FAILURE.
-
Sale!
Black Tial BOV Spring
$54.99$49.99If running a Tial BOV on your N54 instead of the TurboSmart Raceport you want to run the black spring. This will provide you with the most complete vent, and eliminate any chance for flutter/surge. -
VTT S65 7075 Vanos Covers
$249.00VTT is proud to offer the only Vanos covers on the market made from 7075 aluminum instead of the much more common 6061. We went with 7075 due to its increased tensile strength and fatigue strength. Each cover is CNC machined from a 7075 billet, anodized in black for corrosion resistance. These covers snap on and replace the factory plastic covers which are prone to failure over time. We ensure a perfect fit on our covers by going through more than 6 different sample designs to land on our final version. These covers have a very tight fit to avoid vibration or chaffing of the engagement dogs. These are the last vanos covers you will ever have to buy. Simply line them up, and snap them on, with no worries of retiming the engine, etc. Features:- Machined from high-strength 7075 Aluminum
- Anodized for corrosion resistance
- Perfect fitment means no issues down the line
- No engine timing tools required
-
VTT Carbon Fiber Dragy Holder
$19.99 – $49.00Tired of your Dragy flying all over the car as you try to do runs? Tired of low sats or no sats warning due to improper location of the Dragy in the vehicle? Well say goodbye to those issues with our new Carbon Fiber and Plastic Dragy holders. These are made from either 100% Pre-Preg Carbon Fiber, or molded plastic for a perfect fit. The carbon fiber gives it just the right look to add to your performance vehicle! Each holder has dual Suction cups and will stick to any smooth surface. We suggest mounting them in the upper left or right corner of your windshield with a full view of the sky. Dragy holder features- Stop your Dragy from flying off the dash, and having to search for it
- Position your Dragy in the optimal position for the best satellite coverage
- VTT Dragy holder exposes the entire top of the Dragy so nothing is blocking the receiver from the Satellite
- The charging port is not blocked and can be accessed with the cover on
- Choose from REAL Carbon Fiber or Molded Plastic
-
Looking to make sure all metal contaminates that are possibly in your oil are not circulated? VTT has you covered with our Titanium Magnetic oil drain plugs for BMW, and any other vehicle that uses an M12x1.5 drain plug. This drain plug will capture any ferrous metal particles in your oil, and capture them to be cleaned during your next oil change. It also is stronger than a Steel or Aluminum drain plug, and looks cool! These are made from GR5 Titanium and use a rare earth magnet to capture metal particles in your oil... Kit includes:
- 1 Titanium Drain Plug
- 1 M12 Crush Washer
-
Looking to remove the HPFP or DI system on your N54? This plate will block the vacuum pump and prevent oil leaks. You will need to remove any fuel lines, etc. Kit includes
- Block Plate
-
VTT N54/55 BMW Single Piece Silicone Cold Side Charge Pipe
$104.99 – $439.99VTT is proud to offer the very best charge pipe solution for the BMW E Series N54/55 platforms. This system completely does away with the restrictive, and muli-connection stock charge pipe system, and replaces it with a single 6-ply, Heat Resistant, Wire reinforced silicone charge pipe rated at over 200 psi.FITMENT:
• E Series N54 vehicles 335, 135 (Does not fit Z4, and 5 Series) •E Series N55 vehicles 335, 135 (Does not fit SUV or other models) -
Sale!
BMW/Toyota M14x1.25 to M14x1.50 Wheel Stud conversion Kits
$69.99 – $129.99Looking to convert your Supra or G Series BMW to wheel studs. Want to get rid of the difficult to find M14x1.25 ultra-fine thread and convert it to M14x1.15? We got covered with our VTT wheel stud conversion kits. These kits are forged cold rolled steel in 10.9 class, with corrosion-resistant coating for years of use, and convert your M14x1.25 vehicle to M14x1.50 wheel studs. -
VTT BMW F8X S55 Engine Catch Can
$319.99 – $339.99VTT is proud to announce our F8X Series S55 engine catch can set up. This kit uses our already extremely popular modular catch can, and couples it with a custom CNC 6061 bracket, VTT CNC banjo fittings, VTT 5 ply silicone hose, and Push lock fittings. Installation is simple, takes about 30 minutes to 2 hours depending on your skill level, and requires removing one factory hose to install the VTT hoses. Giving an OEM fit and finish when installed. Our kit stands out from others on the market by using high-quality AN fittings, and VTT Banjo adapters. This is the ONLY catch can kit that is plug, and play with our CNC Billet Valve cover -
PFS S58 Port Injection Kit
$899.00 – $1,369.99Looking for some more fuel for your S58 powered BMW? Not looking to run Bulky PI plates, and push your TB and charge tract out of alignment? PFS has you covered with its Plug, and play PI kit for the S58. -
Get rid of the restrictive stock plastic intake on your E-Series N55 powered BMW, and replace it with our 2.5 full flow aluminum intake. This is a MUST when upgrading turbos, or trying to get the most from your stock turbo. Constructed of high-grade aluminum, and powder coated with a very durable gloss black finish this upgrade looks as good as it performs.
-
VTT N54 “DI Injector” Delete Kit
$319.99Looking to get rid of the troublesome and expensive DI injectors on your BMW N54 and move to PI only and a standalone? If so VTT has you covered with its new N54 PI delete kit. This kit allows you to SAFELY remove the DI injectors, install our delete fittings, and run PI only. We machined these deletes from 310 Stainless for extreme heat, and corrosion resistance, and include 3 hold downs. These DI deletes COMPLETELY get rid of all factory provisions, including the seal. If the seal is left intact with no fuel to cool the injector or delete it will quickly overheat and melt the delicate seal causing combustion gasses to escape the engine creating misfires, and worse possibly damaging your injector bore on the cylinder head. Our deletes are machined to be a press fit into the cylinder, and can be either cooled with liquid nitrogen, and dropped in, or tapped in with a hammer, and then held down with the included hold downs. We also include M6 tapped holes on the top of each one in case they need to be removed you can attach a slide hammer, and remove the delete. These are sold as a kit and come with the following- 6 - 310 Stainless DI Delete fittings
- 3 - Hold down brackets
EXTREME ENGINE MODS ARE REQUIRED TO RUN THIS KIT, PLEASE SEE BELOW
-
VTT N54 Stock Style Coil Hold Down Kit
$104.99 – $159.99Tire of sloppy coil placement with your stock N54 VC? Upgraded to a VTT Cast or Billet VC, and want to run the stock style coils, while positively securing the coils to the plug? We got you covered with our N54 stock style coil hold-down bracket. This kit uses our N54 to B58 coil conversion bracket, with 6 billet S brackets to securely hold your stock style coils in place. This will eliminate any possible misfire issues from coils being raised off the plug, etc. It also looks badass, and can be ordered in all colors to match your existing setup, including Carbon Fiber! -
VTT is proud to offer our billet replacement for the BMW B58 factory plastic Oil filter housing cap. This cap does away with the weak plastic cap while adding a strong magnet to pull metal from the oil, and some pop/color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. We offer these caps in 4 anodized colors - Red, Black, Blue, and Clear
-
VTT is proud to release our very own center feed N54 intake manifold. This is NOT the SAME sheet metal manifold everyone is selling with a different logo on it, this is a ground-up design focusing on utility as well as increased flow capability. We performed CAE/Multiphysics simulation for both steady and unsteady state operating conditions in order to bring real-world performance benefits to your N54 build. Our manifold is stronger, outflows the OEM manifold, and installs just as easily as your stock piece (no custom charge pipe or throttle body harness required). Performance gains of 20-30WHP+ were had with no tune changes on a 570WHP stock motor F-RB lite turbo car at the top of the RPM range where it matters most for performance. These numbers will only increase with ported heads, high lift cams, or even higher horsepower builds!
-
Sale!
VTT B58 Engine Lifting hook
$15.99$14.99Need to work on the B58 engine outside of the car? Lift it to put on an engine stand etc? BMW makes an engine lifting tab but it costs $25, and they do not always have them in stock. We made our own, to avoid the high cost, and possibly long wait time. The perfect tool when you want to lift the engine balanced in the place BMW designed for it to be lifted. Made out of coated steel for high strength, long life, and corrosion resistance. Fits all B58 models, and possibly S58 -
VTT N55 GC/GC+ Turbocharger Upgrade
From: $2,629.99Supported power level: GC Stock-600WHP GC+ Stock-700 WHP Ready to take your N55 to the next level? Don’t want to deal with core charges, long lead times, or restrictive factory housings? Look no further! VTT has you covered with our 100% new casting N55 “GC” and “GC+” turbocharger upgrade. We start by keeping the great design elements of the factory N55 turbo and removing the not-so-great ones such as the small factory inlet area, bearing housing oil structure, thrust bearing, and anything else we saw that could be improved upon. With the basics covered, we stepped it up a level adding proprietary VTT changes, and finished off by having all these parts cast to OE quality. What this means for you is serious N55 power made easy; GCs are a drop in turbocharger upgrade that supports over 600-700 WHP while maintaining factory-like spool and all factory connections including oil, water, downpipe, and charge pipe. Add an aluminum intake, tune, and install kit to ensure your GC/GC+ is working at its best! -
Support power level GC Stock-1100WHP Ready to take your BMW F90 M5, or F91-93 M8 to the next level? Don't want to deal with core charges, long lead times, or restrictive factory housings? Look no further! VTT has you covered with our 100% new casting “GC” turbocharger upgrade. We start by keeping the great design elements of the factory BMW turbochargers and removing the not-so-great ones such as the small factory inlet area, bearing housing oil structure, thrust bearing, and anything else we saw that could be improved upon. With the basics covered, we stepped it up a level by adding proprietary VTT changes and finished off by having all these parts cast to OE quality. What this means for you is serious power made easy; GCs are a drop-in turbocharger upgrade that supports 900-1000WHP while maintaining near factory spool and all factory connections including oil, water, downpipe, and charge pipe.
-
N54 Specific bracket for our Midual VTT catch cans. This is for the Dual can version. Mounts to the driver side strut bar.
-
Sale!Are you building a single kit for the N54, N55, or S55 platform? The stock studs are usually a little bit short for most single-head flanges, and finding M7 studs is not easy. So we made our own longer studs to combat the issue. Made from 10.9 grade steel, and coated in black oxide, these are the perfect solution to the short stud problem. Sold individually so order the number you need. Stud details are as follows
- Overall length 47mm (stock 39mm)
- 3mm shoulder
- 6mm head which is 5mm hex
- 14mm short end
- 24mm long end (stock 15mm)
Dont forget our M7 copper lock nuts as well to complete the job - https://vargasturbo.com/product/vtt-fab-m7-copper-locking-exhaust-nuts/
-
Sale!
VTT BMW Carbon Fiber Driveshaft
$1,899.00 – $1,999.99Why overpay for a custom BMW CF Driveshaft? VTT Is proud to offer our Carbon Fiber Driveshaft for many BMW Models made exclusively for us in the USA by PST one of the leading names n CF driveshaft technology! This driveshaft is made from 3.25" CF tubing Spicer 1350 Yolks, and U-Joints. All pieces are then bonded using PST's proprietary process, and balanced to within 1/8 In/Ounce. We couple the driveshaft with VTT Custom 7075 aluminum adapters which completely eliminate any extra guibos etc. These shafts connect directly to the BMW 3 bolt flange, and our 4340 adapter in the rear to get rid of the screw in the shaft. Made in the U.S.A Each Shaft includes the following- 1 VTT/PST CF Driveshaft with attached VTT 7075 adapters
- 1 VTT 4340 Rear End Adapter
- 1 VTT Billet Adapter installation Tool
- 1 BMW Nut Repair kit
- 6 M8 Rear CV joint bolts (E9X, E46 M3 only)
- 3 M10 Rear flange bolts
- 3 M10 front flange bolts
- 1 Small tube of Loc-tite medium thread locker
-
Want to tighten up the diff on your 2021+ G8X M3/M4 and help eliminate any extra diff movement on hard launches? We got you covered with our Billet diff inserts. They are machined from 6061-T6, and anodized black for a long-lasting finish. They install easily by removing the diff bolts one at a time, inserting the bushing, then retorquing each diff bolt. They are sold in pairs of 4. Kit includes:
- 4 G8X Billet Diff bushing inserts
Please note: Slight increase in NVH may be noticed from this product as it stiffens up the rear end, and removes some of the sound dampening of the rubber bushings
-
Improve engine/shifting feel without a huge increase in NVH or high cost! VTT A9X billet motor mount inserts upgrade mounts the way BMW does it, allowing a minimal increase in NVH while stiffening up the engine/shifting feel, and getting rid of excessive engine movement
-
Sale!
VTT F9X X3/4M COMPLETE lock down bundle
From:$527.00$500.65Get the COMPLETE lockdown kit for your X3/4M at one low price. Order all 4 pieces together, and save 5%! Transfer Case Bushing are optional -
Sale!
VTT BMW M12x1.50 Wheel Stud Kits
$69.99 – $129.99Looking to get rid of your factory wheel lugs, and convert them to a high-quality stud kit for track purposes or just to make wheel changes easier? We got covered with our VTT wheel stud conversion kits. These kits are forged cold-rolled steel in 10.9 class, with corrosion-resistant coating for years of use. -
VTT G20/G21/G22/G23 BMW Modular Silicone Intake System
$119.99 – $369.99 -
VTT F3X Ultimate Rear Drag Brake Conversion Kit
$839.99 – $1,009.99VTT ultimate F3X ultimate rear brake conversion kit
VTT is happy to announce its new rear brake conversion kits for the F3X platforms. This is the FIRST and only kit currently on the market that will allow 15" wheels and tires to be run on the rear. This kit replaces your rear brake rotors and calipers to fit 15" wheels. It includes lightweight Wilwood calipers to go from the single-piston factory caliper to race-inspired 4 Piston calipers. While dropping up to a whopping 20 LBS of unsprung weight off the back of your vehicle!
-
We took our popular Billet G8X strut bars and redesigned them to use genuine forged carbon fiber centers. No metal with ugly carbon overlay. This is a real carbon fiber strut bar with ends are CNC machined from 6061-T6 aluminum, and anodized in Black, Red, or Clear.
-
The Factory B58 TU water neck is plastic and is right in the path of your charge pipe if you lose a connection and it blows off. If this does happen to you it can break the plastic neck emptying your coolant in seconds causing you in the best-case scenario to be stranded, and in the worst-case scenario expensive engine damage. Add some cheap insurance with our Billet Water neck.
-
N54 “GC LITE 2.0” Stock location Turbocharger Kit
From:$3,199.00$2,489.99We are proud to introduce the latest in our line of N54 turbocharger products the VTT "GC LITE" 2.0 turbochargers.WHP Level supported (with proper fuel, upgrades, and tuning) Stock-700WHP -
Sale!
CNC N54/N55 Single Flange
$309.99 – $389.99100% CNC flange in mild or SS. This flange will fit all N54's and N55's and comes COMPLETE ready for welding your runners onto it -
VTT- S55 / N55 PCV Delete kit
$94.99 – $379.99Have a problematic PCV on your S55/N55 powered BMW, don't want to pay to replace the entire VC? The VTT PCV delete kit is just what you need. This kit blocks the factory PCV from pulling from the head ports, gets rid of the tear-prone rubber diaphragm, and essentially converts your VC into VTA through the factory front port on the VC. This kit can work stand-alone with the cap, and a -10 ORB plug, can be used to run an extra breather port, or it can be installed with any Catch Can kit that uses the front port of the stock VC. Simply remove the factory cap, take out the diaphragm, screw the plug into the center port, and tap the new cap on with a soft blow hammer or similar. This deletes the PCV and allows you to avoid the issues of a failed diaphragm. Kit Choices- Cap and -10ORB plug only (to be used with an existing catch can or VTA)
- Cap and Catch can kit (recirc or VTA) Complete kit to delete the PCV, and run a catch can (Currently works with S55 only)
- Cap Only (To be used if routing an additional hose from the cap to location or set up of choice, requires your parts to work)
- 1 PCV Cap
- 1 PCV port block off Plug
- 1 -10 ORB Plug
- Optional Catch Can kit
-
Looking to go above 45 psi in your BMW-powered vehicle? Looking for a plug-and-play solution? We have you covered with our BMW 5 bar sensor. These will allow 58 psi to be read and are factory plug, and play. Simply remove your old sensor, replace it with the 5 bar, and have your tuner rescale your map values in both your DME tune and your PI tune if applicable. These are GENUINE BMW sensors directly from BMW.
-
VTT is happy to offer our very unique and universal billet mount to fit any roll bar or cage with 1.5", 1.75", or 2" diameter tubing. These mounts are designed from 6061-T6 aluminum and are made to SECURELY hold a JBL Flip version 3 - Version 6 and allows you to bring music into your race car, off-road vehicle, rock crawler, boat, basically anything that has a length of tubing this will allow you to have an easy way to have tunes without having to install and mount a stereo system. They can also be used as a single mount to hold things such as a helmet, steering wheel, or anything you want to quickly hang for easy access once seated. For the JBL flip you will need TWO mounts, simply install them loosely, snap in your JBL Flip to get the proper spacing, and tighten down. The device is then securely mounted and can be removed easily. We offer these in a variety of anodized colors for a long-lasting durable finish including Black, Red, Blue, Clear, Orange, and Green Mounts are sold individually Features:
- Billet 6061-T6 Aluminum construction anodized in a variety of colors
- Can be used to SECURELY mount a JBL Flip 3-6 to anything that has a length of 1.5", 1.75" or 2" tubing
- Can also be used as a universal mount for anything you need to hang in your race car, off-road vehicle, etc
- Completely reversible, and can be moved from vehicle to vehicle
-
Show off your VTT support and get a good laugh from people with our "We Like To Party" License plate bracket. Born from the infamous quote in Talladega nights
-
VTT is proud to announce our 2007-2018 6.7L Cummins Billet Valve Cover. We created these for the Cummins owner who wants to get rid of their crankcase filter, and plastic VC, while giving you a variety of ways to run your crankcase ventilation. You can also rotate the gas chamber 90 degrees, and run a hose down under the truck, or you can run this with our Billet catch can, for the ultimate in keeping oil out of your turbo inlet, and out of your engine. This upgraded billet VC also adds some nice color, and pop to their engine bay. These come in 4 colors Red, Black, Blue and Clear Anodize
-
PFS is proud to offer a true drop-in 800-1000WHP+ capable LPFP for A90/91 Toyota Supras. This LPFP needs NO additional pumps, wiring harnesses, etc etc. It will support up to 800WHP on Ethanol percentages as high as E98 and will support much higher power levels with less E content as long as you have the octane to support it. For the pump, we start with a factory bucket, we modify it extensively to accept our custom PFS Brushless fuel pump. We then re-terminate the factory wiring to accept the new pump. No wiring splices, done the same way the factory does -the right way.
-
A90/91 Supra / G – Series BMW “GC” Rear Drag Brake Kit
$1,219.99 – $1,329.99Looking to make your A90/91 Supra faster in the 1/4 mile or 1/2 mile racing? Want to run 17", or 15" wheels with a very minor suspension modification? Want to drop 43lbs of unsprung weight off the Rear of the car at the same time? Do not want to break the bank while doing so? Look no further than the VTT "GC" Rear Drag kit for the A90/91 Toyota Supra. This kit will allow you to run the wheel/tire combo you need to drop your ET's all while putting the car on a significant diet over the stock rear brake set up. Fits all 2020+ Supra, and some G-Series BMW. We have confirmed fitment on M340i -
N54 “GC 2.0” Stock Location Turbocharger Kit (fits all N54 models)
From:$4,199.00$2,759.99All new design for 2018! We are proud to introduce the latest in our line of N54 turbocharger products the VTT "GC" 2.0 turbochargers. This is a new N54 turbocharger from the ground up, using 100% new parts throughout. -
VTT-FAB Billet Mac Solenoid brackets
$45.99 – $49.99Building a kit using Mac solenoids to control boost? Need an easy way to mount it? VTT-FAB has you covered with our billet Mac Solenoid brackets. Machined from 6061 billet and anodized in 3 colors, these are the perfect way to mount your Mac valve and look good while doing it. Each kit includes:- One Mac Solenoid bracket (3-Port or 4-Port)
- 2 Allen screws to hold the valve to the bracket
- M6 Mounting Bolt
-
Sale!
VTT B58 Gen 1 BILLET CNC Valve Cover
$1,379.99 – $1,789.99VTT is proud to announce our B58 Gen 1 Billet Valve cover. We created these for the B58 owner who wants to add a great look to their engine bay while also getting rid of the stock plastic valve cover which has problematic PCV systems and can crack with higher mileage. We recommend running it with our B58 engine catch can kit. Which can be added to the order. We offer a number of breather choices for extra crankcase venting including our oil cap breather, as well as one-way Stainless breathers. Valve Cover Details:- 100% CNC 6061-T6 Aircraft aluminum construction
- Anodized in a variety of colors
- Lightweight; 9.7 lbs. (compared to 7.9 lbs for a stock cover - only 1.8 lbs difference)
- Gives the end-user variety for setting up their Valve Cover and PCV System
- Only Billet option on the market
- All Ports are fully Baffled to avoid unwanted oil from escaping
We recommend running it with our B58 engine catch can kit with a Stainless Breather. Which can be added to the order in the drop-downs. If you already have our catch can let us know and we can get you the new hose needed.
-
Sale!
PFS POD HPFP Upgrade
$1,299.00$1,159.99The PFS POD (Planetary OverDrive) is an Overspeed gearbox for your N54/early N55 high-pressure fuel pump. Mechanical fuel pump flow potential is a function of shaft speed -spin it faster, get more fuel flow. The PFS POD allows the user to increase the shaft speed 3x, drastically increasing the output capability of a stock N54 HPFP, and avoid the issues of implementing Port Injection and/or Methanol Injection on vehicles that are targeting more power than the stock fuel system can supply. -
VTT Cone Filters
$39.99 – $49.99VTT Cone Filters feature High flow elements with a silicone body and a velocity stack built-in for smooth flow. We offer these filters in a variety of sizes for universal use. These are also replacement filters for VTT intake kits including B58 Gen 1, TU, Supra, Audi 4.0, N54 Dual Cone filter kit, etc Kit Includes:- 1 - Cone Filter
- 1 - Clamp
-
VTT B58 TU BILLET CNC Valve Cover
$1,679.99VTT is proud to announce our B58 TU Billet Valve cover. We created these for the B58 TU owner who wants to add a great look to their engine bay while also getting rid of the stock plastic valve cover which has problematic PCV systems and can crack with higher mileage. We recommend running it with our B58 TU engine catch can kit. Which can be added to the order. We offer a number of breather choices for extra crankcase venting including our oil cap breather, as well as one-way Stainless breathers. Valve Cover Details:- 100% CNC 6061-T6 Aircraft aluminum construction
- Anodized in a variety of colors
- Lightweight; 9.7 lbs. (compared to 7.9 lbs for a stock cover - only 1.8 lbs difference)
- THREE shrouded -10 ORB ports Gives the end-user variety for setting up their Valve Cover and PCV System
- Only Billet option on the market
- Available with Titanium or works stock hardware
- All Ports are fully Baffled to avoid unwanted oil from escaping
-
VTT F-Series BMW B58 MODULAR Carbon Fiber Intake System
$149.00 – $629.99VTT is proud to announce another product in our carbon fiber product line. The BMW F-Series B58 Modular Carbon fiber intakes system! We COMPLETELY do away with the entire factory intake tract, including the accordion hose, the turbo muffler, all of the restrictive bends. We then replaced it with a smooth radius 2.5"-4" Silicone intake pipe with wire impregnated to ensure strength and longevity. This is coupled with our billet intake connection for an OEM-like fit, and finish. We then created a 100% carbon factory-style intake top and coupled it with our high-flow cotton pre-oiled filters. These tops are 8 layers of 100% carbon, not a single layer wrapped over plastic and they are 1.3MM thick with our logo vacuum printed onto the tops, with a UV-resistant gloss clear coating. This is not only strong but will resist discoloration for an extended period of time. The filters themselves are made with a heat-resistant silicone base, a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. But we didn't stop there! For the crowd looking for increased intake sound, we also made this compatible with our 4" Cone filter for increased flow, and much louder intake sound! These are available for stock, AND aftermarket turbos. Filters are available by themselves for a flow upgrade while keeping the stock look here - https://vargasturbo.com/product/vtt-f-series-bmw-b58-high-performance-drop-in-air-filter-upgrade/ Features:- Completly modular, can switch from Carbon top to Cone filter all using our silicone intake tube
- 50 States Emissions Legal (Carbon fiber top kit only. The Cone filter option is legal for racing use only in California. Always follow all local emissions rules)
- Easy to install 15-30 minutes even for a novice
- A Beautiful Carbon Fiber finish really adds class to the B58 engine bay
- Filters can be cleaned forever meaning never buy new filters
- Completely removes the restrictive stock intake pipe, NOT only the turbo muffler elbow
- Completely reversible if you ever want to remove
-
While BMW did a beautiful job on the G8X M3/4's they sure decided to get cheap out on the strut bars. Ugly steel bars with no real pop or aesthetically pleasing qualities seem like an afterthought to such a well-thought-out car. Well, here at VTT we decided to do something about it, and immediately took our bars off, and let our engineers go to work on a solution. What they came up with is beautiful, and functional. Going from a single "V" Bar, and one strut bar, it's now an interlocking 3 piece design with the "V" bar locking together, with itself, and an extra center support. The result adds a gorgeous look to your M3/4 engine bay, and what BMW should have done from the factory. These are CNC machined from 6061-T6 aluminum, and anodized in Black, Red, or Clear.
-
Sale!
N20 Stage 1 upgrade (New)
$1,499.00$1,439.99WHP Level supported (with proper fuel, upgrades, and tuning) Stock - 350WHP Our VTT N20 Stage 1 upgrade consists of a brand new N20 turbo, custom cast and manufactured for VTT, this is coupled with a VTT custom reverse billet 9-blade compressor wheel, and a brand new 9-blade high-flowing turbine wheel. Turbo upgrade is a complete bolt-on with no changes to water or oil lines and is undetectable by the dealership. -
VTT “GC” S55/N55 to B58 Coil Conversion Kit
From: $319.99VTT is proud to offer its very own Game Changer S55/N55 to B58 Coil conversion kit for the BMW S55/N55 platforms. The 55 series of engines has notoriously had ignition problems with the factory coils, while aftermarket upgrades do exist, they can be bulky. The solution is the BMW B58 ignition coils which are extremely robust and can support well over 1000WHP with no issues. This means a plug-and-play affordable solution that fits like stock, and looks AMAZING doing so! We designed our own 6061-T6 Billet bracket in a plethora of colors including matching shades for every S55/N55 Valve Cover. This means you can mix and match the color of the bracket with coil color, with VC color to truly tailor your engine bay to look exactly how you want it to!Note: Flash setting changes may be required when installing the conversion kit to ensure the proper function of the B58 coils with S55/N55 DME. This can be found in almost all flashing software settings such as MHD, Bm3, etc.
-
S58 Turbocharger Install Kit
$269.99Everything needed to a successful install without having to make a trip to the dealer. -
We have heard all the stories about fluid all over the engine bay, seen the headbands, socks, sweatbands, and all the fixes people have used and still have issues with their PS reservoir. So we decided to do something about it, and started with a ground-up design that completely fixed all those issues, and added some much-needed features to an old BMW design. Kit Includes:
- 1 PS Reservoir in choice of color
- 2 or 4 fittings
- 2 Hose clamps
- Optional One-Way Breather
-
VTT E/F Series BMW Ultimate Front Drag Brake Kit
$1,219.99 – $1,849.99Looking to make your E/F Series BMW faster in the 1/4 mile or 1/2 mile racing? Want to run 17" or 15" wheels s in the front? Want to drop OVER 62lbs of unsprung weight off the front of the car at the same time? Do not want to break the bank while doing so? Look no further than the VTT Ultimate Front Drag kit for the E/F Series BMWs. This kit will allow you to run the wheel/tire combo you need to drop your ET's all while putting the car on a significant diet over the stock front brake set up. The kit is a true plug-and-play kit using Genuine Wilwood parts, coupled with DOT-approved brake lines, CNC 7075 rotor hats/brackets, and a CEL eliminator harness for the brake sensor. This kit comes in 2 different variations, with two different caliper Options for each. We HIGHLY suggest 6-Piston Calipers for street driving, and 1/2 mile racing. These calipers will drop weight, AND be a braking upgrade over stock calipers. -
PFS B58 Port Injection Kit
$689.99 – $2,299.99Looking for some more fuel for your B58 powered BMW? Not looking to break the bank on overpriced PI kits? PFS has you covered with its Plug, and play PI kit for the B58. -
VTT BMW S55 “GCMAX” Turbocharger Upgrade Kit
From:$5,249.99$4,999.99Support power level GCMAX Stock-1000WHP VTT is hitting the ground running in 2023 with the F8X platforms. We are proud to introduce our “GCMAX” evolution of our insanely popular and record-holding GC Series of S55 turbocharger upgrades. We took what we learned from those, and take these to the next level! We increased all the internal flow channels, optimized AR ratios, maxed out the inlet size at 2.5″, and increased the compressor wheel to 67mm. Last but not least, the biggest difference maker! We had to completely retool our turbine housings to take our 54mm G25 series turbine. This wheel absolutely outflows everything on the market and is what we use on our G8X S58 GC+ and F9X M5/8 GC. This wheel is proven to spool faster and flow more than any other wheel in its size range. This is the KEY to making big power while keeping back pressure down. This same wheel combo has seen 1000WHP on the F9X platforms and has more still on top. This setup, also went 9.44@146 in the G80 with a completely stock motor, and drivetrain. If you are looking to take your F8X to the next level whether built motor or stock without breaking the bank, THIS is the ticket. Don’t mess around with overpriced slow spooling twins, or the hassle of going single, ending up with a laggy car, and hacked-up connections. These bolt-on like FACTORY. A plug, and play 1000WHP option! -
Improve engine/shifting feel without a huge increase in NVH or high cost! VTT G3X/G8X billet motor mount inserts upgrade mounts the way BMW does it, allowing a minimal increase in NVH while stiffening up the engine/shifting feel, and getting rid of excessive engine movement
-
Heat is the enemy of power, and the last thing you want is hot coolant heating your charge air even further right before it enters the charge cooler, but this is what BMW has done on the S58. This is done for emissions and quick warm-up purposes. However, If you are looking to make power on the S58, and are upgrading your charge cooler, or adding PI. While you are there, it takes 30 seconds to remove the coolant lines from the TB connections and replace them with our billet coolant delete kit. This completely removes the coolant from the Throttle body and provides a bypass for the coolant. Simply remove the two lines going to the throttle body, and run our hose in their place. You leave the coolant fittings on the TB open and avoid any unwanted heat being introduced into your charge tract. In our opinion a must for full effort builds. We take the work out of it for you. Kit included:
- One Plug and Play TB Coolant Delete Hose
- Billet 6061 Anodized coolant fittings for long leak-free life
- Reinforced 7-ply silicone hose for strength and longevity
- Vibration-resistant crimp clamps
- 100% plug and play, NO cutting or removing factory clamps or hoses. Fully reversible
-
Do you work on a lot of BMW engines from various platforms? Do you ever struggle with heavy cylinder heads, either lifting off the engine or simply moving around? Ever ruined an EXPENSIVE multi-layer head gasket while trying to install a cylinder head due to no secure way to hold it without two people? We answered yes to all of those things, and came up with a tool for anyone that works on BMWs often, and needs a way to simply, and easily remove/install, or simply move around a cylinder head. These cylinder head tools are machined from a solid billet of 6061-T6 aluminum and anodized in 4 colors for long-lasting corrosion resistance. They are knurled for a non-slip grip when oily or wet, and positioned so the head is balanced when lifting The Head Handler fits the following engines, N54, N55, S55, B58, S58 and we offer short extensions for installation with no cams/Cam ledges on the head, or long extensions for people that want to install or remove a head with cams still installed. (B58 only requires short extensions)
-
PFS G8X/F97/98 S58 BMW Drop in Brushless LPFP upgrade (1000WHP+ Capable)
$1,469.99 – $1,679.99PFS is proud to offer a true drop-in 1000WHP+ capable LPFP for G -Series s58, and the F9X X3/4M. This LPFP needs NO additional pumps, wiring harnesses, etc etc. It will support up to 800WHP on Ethanol percentages as high as E98 and will support much higher power levels with less E content as long as you have the octane to support it. For the pump, we start with a factory bucket, we modify it extensively to accept our custom PFS Brushless fuel pump. We then re-terminate the factory wiring to accept the new pump. No wiring splices, done the same way the factory does -the right way.PLEASE NOTE, X3/4M USES A DIFFERENT TOP HAT FOR PRE-LCI, AND LCI. WE HAVE NEW PRE-LCI BUILDS IN STOCK, LCI NEEDS TO SEND YOUR CORE FIRST FOR US TO UPGRADE. CURRENTLY, WE ARE WAITING ON G8X CORES, AND ARE ONLY BUILDING YOUR CORES WITH A 1-3 DAY TURNAROUND.
-
VTT S65 E9X M3 Billet/Silicone Coolant Hose Upgrade
$69.99 – $499.99VTT is proud to announce our S65 Billet/Silicone coolant hose upgrade kit! This is the ONLY complete kit on the market that replaces not only the hoses but ALSO the brittle factory plastic coolant connectors that are prone to breaking over time. We wanted to provide an upgrade to both areas. What we came up with is Billet 6061-T6 connectors anodized black for corrosion resistance, and 6-ply silicone molded silicone hoses in the factory shapes. These hoses are direct plug, and play, and require no changes. Upgrade your cooling and your engine bay at the same time! Fitment is as follows:- All S65 Models
-
Unsure of the state of your CHRA's, whether brand new from a questionable source or rebuilt? DON'T install them without having a proper High-Speed balance done! This is the #1 most critical factor when building a turbocharger, and is even more important for performance turbochargers or small twins that see a LOT of RPM. We use a Turbo Technics VS3 balancer, and balance most units down to under .5G Not all turbos will be able to pass a high-speed balancing test for any number of reasons (usually poor assembly, bent shaft, etc), if they will not pass, we will send you the specs they are in, and as close as we could get them. We then will give you the option to send them back, or we can disassemble, and rebuild them in-house using our other balancing, and assembly tools to ensure a properly built/balanced unit. The service is $79.99 each for most turbos, and we have the capabilities to balance most units. If sending in twins please choose TWO as the quantity
UNITS MUST BE SENT IN WITH NO HOUSINGS, AND IN A CONDITION READY TO BE BALANCED, IF YOU NEED TO SEND IN COMPLETE TURBOS, WE CAN DISASSEMBLE, AND BALANCE FOR YOU, BUT AN EXTRA CHARGE WILL APPLY. IF THE UNITS ARE SENT IN A CONDITION WHERE THEY CAN NOT BE BALANCED WE WILL LET YOU KNOW THE PRICE TO GET THEM TO A STATE WHERE THEY CAN BE
-
N54 Specific bracket for our Midual VTT catch cans. This is for the single can version. Mounts to the driver side strut bar.
-
VTT noticed a hole in the A9X/Z4 market for a high-quality, lightweight, NVH-friendly, and easy-to-install Diff Lock Down kit to improve diff stability under launching, and hard cornering. So we did something about it and went to work on a very innovative design that 100% positively locks the diff down from movement, while shielding it from adding a ton of NVH, and can be used with the stock diff, and subframe bushings. This design uses existing mounting points on the vehicle, you do NOT have to remove the subframe or the Diff to install. Simply remove 4 diff bolts, drill two holes in the subframe slightly bigger, install two M10 riv-nuts, and install the lockdown, you do not even have to move the exhaust. A typical install can be 15-30 minutes for someone who is experienced working on vehicles, an hour if you like taking it slow. You WILL need a Riv-nut tool to install the Riv-nuts, we provide a link below for what we recommend on Amazon. Features:
- Lightweight 1.5 lbs for the entire lockdown plate
- Uses FOUR connection points on the Diff, and two on the subframe for the ultimate in positive diff location, this will stop all diff movement on launch, saving your guibos, etc
- 100% Billet construction from 6061-T6 aluminum
- Anodized in 4 colors for corrosion resistance, a long-lasting finish, and good looks
- The subframe does NOT have to be removed for installation
- Uses all 12.9 grade hardware
- Does not add excessive NVH
- Positively locks down the diff to eliminate all unwanted movement under launches, acceleration, cornering, etc.
-
The Factory B58 TU Upper Cylinder head hose is plastic and is right in the path of your charge pipe if you lose a connection and it blows off. If this does happen to you it can break the plastic neck emptying your coolant in seconds causing you in the best-case scenario to be stranded, and in the worst-case scenario expensive engine damage. Add some cheap insurance with our Billet Upper Cylinder head hose, this sits right above the plastic water neck. Product Details:
- Plug and play direct factory replacement
- 6061-T6 Billet aluminum with black anodizing for a corrosion-free life
- 7-Ply Silicone in 3 colors
- Cheap insurance against a blown charge pipe which could turn into a blown motor
-
VTT is proud to offer a Phenolic spacer for the BMW B58 platform. When upgrading to an aluminum charge cooler you get the benefit of a better core, and more cooling capacity, but it also comes with the downside of DIRECT heat transfer from the head to the manifold which can cause heat soak and less-than-ideal IAT's even with an upgraded charge cooler. We manufacture these from G11 Expoxy sheet which has great heat and hardness characteristics, and we feel is the ideal material for this application. The thickness is 8mm.
Please note: Longer studs or bolts may be required introducing a phenolic spacer into your system
-
VTT BMW S58 G8X M3/M4 – F9X X3M/X4M “GC” Turbocharger Upgrade
From: $4,199.99Support power level GC Stock-800WHP GC+ Stock-950WHP As of 07/24/22 GC+ units are available for PRE-ORDER ONLY. We expect these Q2 2023 Ready to take your BMW G8X M3/4, or F9X XM3-4 to the next level? Don't want to deal with core charges, long lead times, or restrictive factory housings? Look no further! VTT has you covered with our 100% new casting “GC” turbocharger upgrade. We start by keeping the great design elements of the factory BMW turbochargers and removing the not-so-great ones such as the small factory inlet area, bearing housing oil structure, thrust bearing, and anything else we saw that could be improved upon. With the basics covered, we stepped it up a level by adding proprietary VTT changes and finished off by having all these parts cast to OE quality. What this means for you is serious power made easy; GCs are a drop-in turbocharger upgrade that supports 800-950WHP while maintaining near factory spool and all factory connections including oil, water, downpipe, and charge pipe. -
Running upgraded stock frame turbos on your S58 powered G8X M3/4 or just looking to maximize airflow on stock turbos? We have you covered with our silicone intake tubes. These completely great rid of every restriction, accordion section, and any other issues designed into the factory pipes, and replaces them with 100% smooth-flowing silicon intake tubes. These are 7 layers, and wire is impregnated to ensure they will never collapse even under extreme vacuum. Design Features:
- Smooth bends, and increased area for maximum flow no matter what turbos you are running
- Wire impregnated 7-Layer Silicone for high strength
- Billet anodized connectors for a great look and long-lasting finish
- High-quality German Clamps
- Easy install 30-45 minutes even for a novice
-
BMW G2X Carbon Fiber Strut Braces
$269.99 – $319.99We took our popular Billet G8X strut bars and redesigned them for use on the G2X platform. No metal with ugly carbon overlay. This is a real carbon fiber strut bar with ends are CNC machined from 6061-T6 aluminum or T2 Titanium, and anodized in Black, Red, Blue, or genuine T2 Titanium with a rainbow finish. -
Sale!
VTT BMW E9/8X Double Adjust Drag Shock Kit
$1,199.99$1,109.99Looking to maximize your E9/8X Series BMW for drag racing? Want to be able to dial in the perfect amount of compression or rebound on your launch? The VTT Double adjust drag shock kit is just want the doctor ordered! -
Sale!
VTT BMW F3X/G2X Series Double Adjust Drag Shock Kit
$1,199.99$1,109.99Looking to maximize your F or G Series BMW for drag racing? Want to be able to dial in the perfect amount of compression or rebound on your launch? The VTT Double adjust drag shock kit is just want the doctor ordered! -
VTT E9/8X Rear Drag Brake Conversion Kit
$839.99 – $1,009.99VTT ultimate E8/9X ultimate rear brake conversion kit VTT is happy to announce its new rear brake conversion kits for the E8X/E9X platforms. We take what already exists on the market, and make it much more complete, and much more performance-oriented while keeping the clearance for those 15” wheels. This kit replaces your rear brake rotors and calipers to fit 15″ wheels. It includes lightweight Wilwood calipers to go from the single-piston factory caliper to race-inspired 4 Piston calipers. While dropping up to a whopping 20 LBS of unsprung weight off the back of your vehicle! -
VTT Virtual Gift Card
$50.00 – $1,000.00Please Note: This is a Virtual Gift Card. After purchase you will receive an email with your Gift Card code
-
N63/N63TU – S63/S63TU Stage 1 TurboCharger Upgrade
$3,149.99 – $4,199.99WHP Level supported (with proper fuel, upgrades, and tuning) Stock-800WHP We are proud to introduce the first in our line of N63/N63TU - S63/S63TU turbocharger products the VTT Stage 1 hybrid turbochargers. If you are ready to take your N/S63-powered vehicle to the next level, this is the upgrade for you. We start with a fresh rebuild using all factory spec internals, then we machine the stock compressor housings to take our own custom-sized VTT billet compressor wheels, these wheels can support up to 800WHP with the proper tuning and fuel. We then triple balance the wheels, CHRA, and assemble them into the freshly prepared housings. Please select your model -
Sale!
Skunk2 S58 Camshafts
$1,899.00$1,545.00VTT is happy to announce we are the sole distributor for the upcoming Skunk2 S58 camshafts. The performance results are nothing less than amazing more than 120WHP/WTQ Gain in the midrange, and strong gains up top from 50WHP to 80WHP depending on the run. Overall, for 5 hours of work, and a retune you can pick up more than 120WHP/WTQ mid-range, and more than 50WHP/WTQ up top with no other changes to boost. This IS the best bang for your buck mod out there after you have done all the usual suspects.Valve springs are REQUIRED to run these cams
-
Sale!
VTT BMW S58 Billet Oil Cap
$59.99$54.99Want to get rid of the plastic oil cap on your BMW S58-powered vehicles including the G8X M3/4, and the X3/4M SUVs, and add some nice billet pop to your engine bay? Look no further than the VTT S58 Billet Oil cap. These are a true Billet oil cap machined from 6061-T6, and anodized in a variety of colors. These are NOT thin cap that snaps over your existing oil cap. Currently, we offer them in 4 colors -
A90/91 Supra / G – Series BMW “GC” Front Drag Brake Kit
$1,219.99 – $1,849.99Looking to make your A90/91 Supra faster in the 1/4 mile or 1/2 mile racing? Want to run 17", (or 15" wheels with suspension modifications), and skinnies in the front? Want to drop OVER 70lbs of unsprung weight off the front of the car at the same time? Do not want to break the bank while doing so? Look no further than the VTT "GC" Front Drag kit for the A90/91 Toyota Supra. This kit will allow you to run the wheel/tire combo you need to drop your ET's all while putting the car on a significant diet over the stock front brake set up. The kit is a true plug-and-play kit using Genuine Wilwood parts, coupled with DOT-approved brake lines, CNC 7075 rotor hats/brackets, and a CEL eliminator harness for the brake sensor. This kit comes in 2 different variations, with two different caliper sizes for each Fits all 2020+ Supra, and some G-Series BMW. We have confirmed fitment on M340iDisclaimer: The HD kits are designed for street use, and drag racing. Never use for heavy braking racing environments such as Auto-X or Road Racing. Scalloped kits should never be used for street driving, and are ONE-PASS COOL DOWN DRAG RACING ONLY, EVEN IN THIS ENVIRONMENT, THEY MAY CRACK IF USED TOO AGGRESSIVELY. Always drive within your limits!
-
VTT BMW TITANIUM 5×112 to 5×114 Bolt Pattern Conversion Kits
$189.99 – $369.99Looking to convert your 5x112 M14x1.25 BMW vehicle to 5x114 to open up your wheel options? Want to drop 60% of the weight off steel options? We got covered with our VTT TITANIUM wheel stud conversion kits. These kits are Grade 5 Titanium studs, rated at more than 135,000PSI Tensile Strength, with Grade 5 Titanium nuts with a 60-degree cone seat to fit most all aftermarket wheel applications and convert your vehicle to M12x1.5 wheel studs which allow you to fit 5x114 wheels with no other changes.PLEASE NOTE – THESE STUDS WILL ONLY WORK IF YOUR WHEELS ARE DRILLED M14 THESE WILL NOT WORK FOR WHEELS DRILLED M12!
DO NOT USE ANY HUB-CENTERING SLEEVES WITH THESE CONVERSION STUDS, THE LUGS WILL CENTER THE WHEELS. THE USE OF A CENTERING SLEEVE MAY LEAD TO STUDS BREAKING. FOR INSTALLATION YOU MUST SNUG EACH LUB UP SLOWLY, AND IN A STAR PATTERN TO GET THE WHEEL CENTERED ON THE LUGS, FAILURE TO DO SO CAN ALSO LEAD TO FAILURE.
-
Need a Tee fitting for plumbing Vacuum, or Boost lines, Don't want to use cheap plastic ones that can get soft when hard, and brittle after they heat cycle? We didn't either, which is why we machined these high-quality billet tees to solve this issue. Machine from 6061-T6 aluminum, and anodized in black for a long-lasting corrosion-free finish, these tees look great, and will you never have to worry about one failing. We offer them in two sizes, each size has 12mm legs and 3 barbs:
- 7.60mm / -4 Push Lock for people looking to use -4 push lock hose or -4 AN hose. This is a perfect fit for those.
- 1/4" For people looking to use 1/4" vacuum tube
-
VTT is Proud to offer our Billet Aluminum DCT Transmission pan. This pan does away with the factory plastic pan and upgrades it to 6061-T6 aluminum anodized in a variety of colors. This pan increases fluid capacity by 80% or almost DOUBLE the stock pan, has a US-made reusable Viton Gasket, a rare earth magnet built in to pull metal from the fluid, machined external fins to help aid in cooling, and a -6 ORB drain plug. Product Features:
- Billet construction using 6061-T6 aluminum for long life, and added strength
- 80% or Almost DOUBLE the factory fluid capacity at 2000ML compared to 1150ML
- Machined fins for improved cooling
- Rare Erath magnet built in to pull metal from the fluid
- US-Made Viton Gasket
- -6 ORB drain plug for easy service
-
VTT F8X M2C/3/4 BMW Ultimate Lightweight Front Brake Kit
$1,529.99 – $1,849.99Are you looking to make your F8X Series BMW faster in the 1/4 mile or 1/2 mile racing? Want to run 17" wheels s in the front? Want to drop close to 50 lbs of unsprung weight off the front of your F8X M2C/M3/M4 at the same time? Do not want to break the bank while doing so? Look no further than the VTT F8X Series BMW Ultimate Lightweight Front Brake Kit! This kit will allow you to run the wheel/tire combo you need to drop your ETs all while putting the car on a significant diet over the stock front brake setup. The kit is a true plug-and-play kit using Custom VTT/Genuine Wilwood parts, coupled with DOT-approved brake lines, CNC 7075 rotor hats/brackets, and a CEL eliminator harness for the brake sensor. This kit comes in 2 different variations, with two different caliper Options for each. We HIGHLY suggest 6-Piston Calipers for street driving and 1/2-mile racing. These calipers will drop weight, AND be a braking upgrade over stock calipers. Scalloped kits are for DEDICATED race duty only, and should never be run on the street! -
VTT Billet/Silicone B58 F2X/F3X Coolant Hoses
$54.99 – $529.99VTT is proud to announce our B58 Gen 1 Billet/Silicone coolant hose upgrade kit! The factory plastic coolant connectors are prone to breaking over time, and the hoses are just your standard run-of-the-mill coolant hose. We wanted to provide an upgrade to both areas. What we came up with is Billet 6061-T6 connectors anodized black for corrosion resistance, and 6-ply silicone molded silicone hoses in the factory shapes. Currently, these fit most Gen 1 B58 applications F2X/F3X. Application chart below.They may not fit some models, we have not test fit on all models.
Please bear in mind, the B58 coolant hoses can be difficult to install, and may require removal of other items on the engine to reach the hose connections.
-
Adding a Front-facing manifold to your N54, and need to extend your map sensor harness? We got you covered with our 24" extension harness. High-quality wiring, with seating, and our own 3D printed connectors ensure a perfect fit. Fits all N54, and very early N55, please check your plug connection on your map sensor before ordering
-
B58 CP-CARRILLO FORGED PISTON SET
$1,419.99 – $1,469.99These are the same premium pistons we use in our winning race and high-performance street engines around the world! We feel that these are the best pistons for your high performance or racing engine. -
VTT E90 Carbon Fiber Headlight Duct
$579.99 – $629.99VTT Carbon Fiber headlight duct for the E90 will complete any racecar or streetcar build helping to get rid of weight and add functionality with a working 6″ velocity stack to run your turbocharger into for optimal flow, and ram air. 100% multi-layer prepreg Carbon Fiber, with a UV resistant clear coat for the ultimate in strength, and durability! We offer them in the following varieties: Passenger side duct with 6″ Velocity stack 3″ hose connection Passenger side duct with 6″ Velocity stack 4″ hose connectionFITMENT: PLEASE NOTE IT FITS ALL E90, AND E91 MODELS INCLUDING M3, ETC. THIS LIGHT HAS NOT BEEN TEST FIT ON AN LCI VEHICLE, AND WE CAN NOT CONFIRM IT FITS LCI. WE CAN ONLY CONFIRM PRE-LCI FITMENT AT THIS TIME.
-
Sale!
VTT S65 BILLET CNC Valve Cover Set
$1,999.00$1,499.00VTT is proud to announce our S65 Billet Valve cover set. We created these for the S65 owner who wants to add a great look to their engine bay while also getting rid of the stock valve cover which are very problematic and can crack/leak/delaminate with higher mileage. We started from scratch on these and made them the RIGHT way. We did this by getting rid of the leak-prone factory oil cap design with a threaded cap with O-ring Seal, we also added two -10 ORB bungs which allow you complete freedom to plumb in a catch can, or vent system of your choice. The internal baffling is 100% in place to knock down any oil from the vapors before being expelled! We ALSO kept the factory PCV in place. You can run these in ANY number of ways. Valve Cover Details:- 100% CNC 6061-T6 Aircraft aluminum construction
- Anodized in a variety of colors
- Lightweight; 9.7 lbs. (compared to 7.9 lbs for a stock cover - only 1.8 lbs difference)
- TWO shrouded -10 ORB ports which Give the end-user variety for setting up their Valve Cover and PCV System
- Only Billet option on the market with a threaded oil cap, and PCV choices
- Available with Titanium, steel, does NOT work with stock hardware
- Works with our 1" one-way breather for ultimate crankcase venting
- Two Billet Valve covers
- Two US-sourced Viton Gaskets
- Choice of Various breather options, PCV block-off, etc
- Choice of hardware (optional)
- Two Billet Lower Covers in matching cover (optional)
-
VTT is proud to offer high-performance drop-in replacement filters for the 2021+ G8X M3/M4. These filters are custom-made for VTT. They are made with a heat-resistant silicone base, a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. On the dyno, we saw more than 13WHP gains with these filters and our Carbon Fiber intake Tops. These filters will also work perfectly with the stock tops. We recommend removing the pre-filter for best flow if the stock top is used. We offer them in two colors. Red, and Black
Features:- 50 States Emissions Legal
- Easy to install 15-30 minutes even for a novice
- Filters can be cleaned forever meaning never buy new filters
- Up to 13WHP gains
- Completely reversible if you ever want to remove
Fitment: 2021+ BMW
- G80 M3
- G82 M4
- G83 M4 Convertible
-
Sale!
VTT G8X Ultimate Rear Drag Brake Conversion Kit
$1,999.00$1,889.99VTT ultimate G8X ultimate rear brake conversion kit
VTT is happy to announce its new rear brake conversion kits for the G8X platforms. This is the FIRST and only kit currently on the market that will allow 17" wheels and tires to be run on the rear. This kit replaces your rear brake rotors and calipers to fit 17" wheels. It includes GENUINE BMW calipers that RETAIN full parking brake function. This means no downside, 17" wheel fitment, parking brake functionality, no loss of braking power, 26.4LBS unsprung/rotating weight removed.
-
Sale!
VTT Billet Large Capacity BMW ZF8HP Transmission Pan
$699.00$599.00VTT is Proud to offer our Billet Aluminum ZF8HP 8-speed Transmission pan. This pan does away with the factory plastic or cast aluminum pan and upgrades it to 6061-T6 aluminum anodized in a variety of colors. This pan increases fluid capacity to 5.7 QTs compared to the stock pan which holds 3.7 QTs, has a US-made reusable Viton Gasket, a rare earth magnet that sits under the filter to not only support it, but pulls metal from the fluid, machined external fins to help aid in cooling, and a -6 ORB magnetic drain plug. Clearance is NOT increased on G8X, X3/4M, or F90 M5, if used on smaller model ZF8HP with the plastic pan, the pan DOES fit but has reduced clearance. Product Features:- Billet construction using 6061-T6 aluminum for long life, and added strength
- Add a full 2 QTs fluid capacity at 5450ML (5.7QTs) compared to 3500ML (3.7QTs)
- Machined fins for improved cooling
- Rare Erath magnet built in to pull metal from the fluid
- US-Made Viton Gasket
- -6 ORB magnetic drain plug for easy service
-
VTT-FAB Billet Velocity Stack
$39.99 – $49.99Running an open turbo, and want to straight out the airflow to the compressor for extra efficiency. Our billet velocity stack is what you need. Backed by physics a Bellmouth or velocity stack will help smooth the air coming into the turbocharger or on NA cars. These are made from 6061-T6, and anodized in a variety of colors and sizes. Currently, we offer 3", 4", and 5" These are suitable to fit any intake tubing or turbocharger inlet with that size. These are available with or without a silicone connector and clamps. Our V-Stacks are also made to extend down on the outside so you can attach a Vibrant S&B or other compatible 7" Filter on the 3"/4" version. Features:- Smooth air before it enters the turbocharger or Intake
- Very low profile, only sticking 2.5" above the turbocharger inlet. Even if you have no room for a filter these will fit
- Fits all turbochargers with a 3", 4" or 5" inlet including PTE Sportsman Cover!
- 3" and 4" version works with Vibrant #10961 7" filter or S&B 1032 Filter if you have room
- 100% billet construction for high-strength
- Anodized for long life, and durability
-
VTT-FAB Extension Harnesses
$45.99 – $99.00Need to move your coolant expansion tank to the other side of the vehicle for a single turbo kit you are building, extend Map sensor plugs, or IAT, how about Throttle Body? Don't cut your factory wires. Just get a VTT-FAB extension harness, and plug and play! These come in various lengths and are covered in expanded sheathing with heat shrink on both ends for a long-lasting, good-looking finish. Available:- Coolant Extension for late model BMW 2015+ 5 ft
- Pre-Throttle Map sensor extension harness 2 ft
- Pre-Throttle IAT Sensor extension harness 2 ft
- B58/S58/B48 etc Throttle body extension harness 2 ft
- B58 to S55 Throttle conversion/extension harness 2 ft
- EWG Actuator Extension harness, Various Lengths
- N54 stock MAP to 3.4 N20 Map sensor extension
-
VTT is proud to offer high-performance drop-in replacement filters for the BMW B58 TU, this includes G series BMW including Z4, A90/91 Toyota Suora, and. These filters are custom-made for VTT. They are made with a heat-resistant silicone base, and a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. We designed these to work with our Carbon Fiber intake Tops, but these filters will also work perfectly with the stock tops. We offer them in two colors. Red, and Black Features:
- 50 States Emissions Legal
- Easy to install in 15-30 minutes even for a novice
- Filters can be cleaned forever meaning never buy new filters
- Completely reversible if you ever want to remove
-
B58 CP-CARRILLO CONNECTING ROD, SET (6)
$1,739.99 – $2,209.99Carrillo connecting rods are well known within pro racing and street performance circles for good reason; they produce a premium product that winning racers around the world depend on. -
VTT ultimate F9X X3/4 ultimate rear brake conversion kit
VTT is happy to announce its new rear brake conversion kits for the F9X platforms. This is the FIRST and only kit currently on the market that will allow 17" wheels and tires to be run on the rear. This kit replaces your rear brake rotors and calipers to fit 17" wheels. It includes GENUINE BMW calipers that RETAIN full parking brake function. This means no downside, 17" wheel fitment, parking brake functionality, no loss of braking power, 26.4LBS unsprung/rotating weight removed.
-
PFS is proud to offer a true drop-in LPFP for S55-powered BMWs. This LPFP needs NO additional pumps, wiring harnesses, controllers, etc. Capability is 850whp on E85 and up to 1000whp on race fuel. We start with a factory bucket, we modify it to accept our high-flow brushless fuel pump. We then re-terminate the factory wiring to accept the new pump. No wiring splices, done the same way the factory does -the right way. Every pump is fully tested on our flow bench to ensure proper function before shipping -you're going to be installing a product that has already proven itself. This pump is a true drop-in meaning you pull the factory unit out, install this pump, plug the factory plug into the hat, and you are done. The stock ECU controls the pump fully, and NO tune changes are required to take advantage of it. Installation is easy for the DIY'er, and if you use a performance shop it'll be easy for them -just tell them to remove the old and replace it with new same as factory pump.
-
VTT “DCS” EWG System for TurboSmart Straight Gates
$799.99 – $1,499.99VTT is proud to offer our EWG "Direct Control System" or DCS! This is a completely new innovation for people looking to control the highest-flowing wastegate on the market using an existing BMW electronic actuator. This system will allow BMW owners who have a vehicle with Electronic Wastegates from the factory to utilize this system to control an externally wastegated turbo system, AND it will ALSO allow ANY vehicle to use this setup to control your own custom turbo system. This is done by utilizing our custom 7075 Billet aluminum bracket coupled with a Turbosmart Straight gate, and if needed an EWG controller made for us by DCCD Pro. This allows direct external wastegate control over any turbocharger system with or without EWG for the factory. Features:- Utilizes the most current wastegate technology the Turbosmart Straight Gate. This gate allows maximum flow with minimal restriction, low drive pressure, and much more. Full details can be found here - https://www.turbosmart.com/product/electronic-straightgate-esg50-external-wastegate/
- Can be configured in multiple ways, and angles based on how you mount the adapter
- The adapter is 7075 Aluminum which has the strength of steel and weight of aluminum
- All connection fittings, are made from Nitronic 60 which has extremely high temperature and wear properties
- Zero Drive Pressure, no springs, no poppet valves, direct control over the gate using factory ECU logic
- Adaptable to ANY turbo system on any car to provide the ultimate in boost control!
-
Are you looking to make your F9X X3/4M SUV BMW faster in the 1/4 mile or 1/2 mile racing? Want to run 17" wheels in the front? Want to drop close to 75 lbs of unsprung weight off the front of your F9X X3/4M at the same time? Do not want to break the bank while doing so? Look no further than the VTT F9X Series BMW Ultimate Lightweight Front Brake Kit! This kit will allow you to run the wheel/tire combo you need to drop your ETs all while putting the car on a significant diet over the stock front brake setup. The kit is a true plug-and-play kit using Genuine Wilwood parts, coupled with DOT-approved brake lines, CNC 7075 rotor hats/brackets, and a CEL eliminator harness for the brake sensor. Fitment Guide:
- F9X X3/4M ALL
-
Sale!
VTT-FAB S55 Factory Control EWG Top Mount Single Turbo kit
$5,199.00 – $7,699.00VTT-FAB is proud to offer the premiere top-mount single turbo kit for the F8X S55 platform. This kit is 100% made in the USA at our Hayward, CA facility, and only uses top-of-the-line components. We start with 321 Stainless materials as well as Billet flanges to create a high flowing, and long-lasting manifold. We couple this with our revolutionary factory-controlled external gate system using a Turbosmart 60mm Straight gate. This gives you COMPLETE control of an external wastegate with your factory ECU tune. This means no external boxes to control boost, no mac solenoids, and no vacuum/boost lines. Simply reuse your factory actuator on our adapter, and you have the best flowing, and easiest-to-control system on the market with a true boost range of 0 psi, to whatever your turbo of choice can make.We are currently taking orders for kits with a 2-4 week build time, NOT including coating time if chosen
Features:- Fully Fabbed in-house in Hayward Ca using US-sourced parts
- The ONLY top mount kit on the market that clears the factory strut bar
- All Tig Welded
- VTT-FAB 6 into Cast Collector
- Fully set up for our VTT-FAB factory-controlled turbo smart straight gate. Making this plug-and-play with your existing tuner
- 321 Stainless Weld Els for the ultimate in heat resistance and durability
- 1.25" Primary for lightening spool, and high exhaust gas velocity
- NO external boost control needed
- That AMAZING 6 into 1 turbo sound that divided housings just dont give you
- The charge pipe is flanged for a Turbosmart or Tial BOV
-
VTT is proud to offer our billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap, and the need for a special tool for removal, while adding some pop, and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. We also designed these caps to complement our Power Steering reservoirs We offer these caps in 5 colors - Red, Black, Blue, Gold, and Clear anodized The cap retains the factory hex for easy installation, and removal, and includes a new sealing O-ring Fitment includes All S65 models
-
VTT F8X M2C/3/4 BMW Ultimate Lightweight Rear Brake Kit
$1,529.99 – $1,849.99Are you looking to make your F8X Series BMW faster in the 1/4 mile or 1/2 mile racing? Want to run 17" wheels s in the front? Want to drop 21 lbs of unsprung weight off the front of your F8X M2C/M3/M4 at the same time? Do not want to break the bank while doing so? Look no further than the VTT F8X Series BMW Ultimate Lightweight Front Brake Kit! This kit will allow you to run the wheel/tire combo you need to drop your ETs all while putting the car on a significant diet over the stock front brake setup. The kit is a true plug-and-play kit using Custom VTT/Genuine Wilwood parts, coupled with DOT-approved brake lines, CNC 7075 rotor hats/brackets, and a CEL eliminator harness for the brake sensor.This kit comes in 2 different variations, with two different caliper Options for each. We HIGHLY suggest 6-Piston Calipers for street driving and 1/2-mile racing. These calipers will drop weight, AND be a braking upgrade over stock calipers. Scalloped kits are for DEDICATED race duty only, and should never be run on the street! Requires trimming of dust shields to fit
-
Sale!
VTT E9X M3 Billet Diff Lock Down Kit
$649.99$599.99VTT noticed a hole in the E9X M3 market for a high-quality, lightweight, NVH-friendly, and easy-to-install Diff Lock Down kit. So we did something about it and went to work on a very innovative design that 100% positively locks the diff down from movement, while shielding it from adding a ton of NVH, and can be used with the stock diff, and subframe bushings. This design uses existing mounting points on the vehicle, you do NOT have to remove the subframe or the Diff to install. Simply lower the diff to access the front cover, drill one hole in the subframe slightly bigger, install an M12 riv-nut, and install the lockdown. A typical install can be 1-2 hours for someone who is experienced working on vehicles. You WILL need a Riv-nut tool to install the Riv-nut, we provide a link below for what we recommend on Amazon. Kit Includes:- Diff Lockdown kit
- All 12.9 Hardware
- 15mm Drill bit for Riv-nut
- M12 Riv-Nut
- 12.9 Diff Bolt with lock nut
- Hardened Steel washers for Diff Bolt
-
Put an end to the dreaded plastic PS pulley issues with our 100% Billet Aluminum PS pulley. We make these from 6061-T6 aluminum and anodize them in one of 5 colors (Black, Red, Blue, Gold and Clear) for a great look, and long-lasting finish. These weigh 7Oz, very close to the weight of a stock pulley, and are lighter than the cast aluminum versions on the market. Kit includes:
- One Billet Power Steering Pulley
- All BMW S65
-
Looking to adapt your wheel bore size to a smaller hub bore? VTT has you covered with our hub-centric adapters. These adapters are made from Billet 6061-T6 aluminum, and anodized in black. We have these sizes currently
- 57.1mm hub to 60.1mm wheel bore
- 57.1mm hub to 64.1mm wheel bore
- 57.1mm hub to 66.1mm wheel bore
- 57.1mm hub to 66.6mm wheel bore
- 57.1mm hub to 67.1mm wheel bore
- 57.1mm hub to 70.3mm wheel bore
- 57.1mm hub to 71.6mm wheel bore
- 57.1mm hub to 72.6mm wheel bore
- 57.1mm hub to 73mm wheel bore
- 57.1mm hub to 74mm wheel bore
- 57.1mm hub to 74.1mm wheel bore
- 64.1mm hub to 72.6mm wheel bore
- 66.6mm hub to 72.6mm wheel bore
They are sold in sets of two, order TWO SETS for a full car, or one set per axle.
-
PFS S58 Port Injection Block Off kit
$104.99 – $209.99Looking to return your S58 back to stock, and need a way to close off the ports drilled in the manifold? We got you covered. This kit will bolt into place, allow you to use your existing fuel rail, and insert injector blanks. Or you buy a new rail with the blanks, which will allow you to sell your current PI kit complete. -
VTT N54 Carbon Fiber Valve Cover
$1,679.99Yes, we really did it. We took our extremely popular cast, and Billet N54 valve cover, and had it fully molded out of Multi-Layer Carbon Fiber with a UV resistant clear coat for strength and durability. It has a billet machined gasket surface, and billet -10ORB ports again for added strength and for use with our Modular N54 PCV systems. This is the ONLY N54 VC on the market that is LIGHTER than stock, and allows you to fully get rid of the factory PCV, and oh did we mention its CARBON FIBER! Weight:- Stock VC weighs 5.4Lbs
- VTT Carbon Fiber VC 4.7Lbs
-
VTT-FAB Carbon Fiber Turbo Blanket
$64.99 – $99.00Looking to keep the underhood heat down on your single turbo car, or build? We got you covered with our VTT-FAB Carbon Fiber Turbo Blankets. The outer shell is made of Carbon Fiber, and the inner shell is Silica Fiber. For 2500F intermittent / 1800 direct heat rating. We have them in 2 sizes T3, and T4. See fitment below Kit included:- 1 Carbon Blanket of choice
- 2 install springs
-
Sale!
VTT BMW Wireless Plug, and Play Line Lock Kit
$649.00$599.00VTT is proud to offer a truly plug-and-play line lock kit for select BMW vehicles that does NOT require running wiring inside the car, mounted switches, holes in the dash, etc. Our newly designed and released line lock kits use a 40amp wireless remote control switch with 4 different modes that allow you to tailor your line lock setup exactly as you prefer. You simply install the solenoids, install the harness with the switch which has all the wiring terminated, bleed the brakes, and you are ready for effortless burnouts which will not be interfered with by the DME because you are holding the brakes, nor wear your rear brake pads. You can store the remote anywhere in your vehicle, center console, cup holder, door cup holder, etc., and when you need to do a burnout to heat your race tires it's in arm's reach without running any wiring into the vehicle. Fitment is confirmed for G8X M3/4, A9X Supra - The kit itself including lines, solenoids, etc will fit most all late model BMW Chassis including F8X, F3X, G2X, etc. The main concern will be mounting the wireless switch in the passenger cowl area. The kit includes:- Line lock solenoids with weather pack connectors
- Two Parker 90-degree -3 an fittings
- Two Stainless Steel adapter fittings
- Two DOT Approved Stainless Steel brake lines
- One complete wiring harness
- One Remote control switch with TWO remotes
-
Skunk 2 B58 TU Camshafts
$1,545.00Skunk2 Ultra Series Stage 1 Camshafts for Toyota Supra MK5/BMW B58TU /// FEATURES • Billet 8660 Alloy Steel Camshafts • Improved Efficiency/Power • Widest Possible Power Band • Smooth Driveability & Idle • Retains Double VANOS + Valvetronic Functionality -
VTT “1.3” Kit for BMW G8X Platforms
$3,099.00 – $3,199.00VTT Is proud to announce our "1.3" kit for BMW G8X Platforms. This kit is a COMPLETE kit for G8X AWD or RWD vehicles looking to maximize their traction at the drag strip. This setup virtually guarantees a 1.3 or better 60 ft time in an AWD vehicle and will beat your best ET before installing. For RWD vehicles this is a must to maximize traction... The kit includes EVERYTHING needed to convert the vehicle to 17" wheels/Slicks in the rear and opens up many options for tires. We recommend Hoosier 28/10.5/17 DBR or MT ET Street R 305/45/17 Buying everything together gets you a 10% discount over buying them on their own!- 2 17x10" Rota wheels custom-made for VTT in various colors
- 2 Tires of your choice MT ET Street R 305/45/17 or Hoosier DBR 28/10.5/17 mounted and balanced before shipment
- VTT complete Ultimate rear brake kit which comes with a custom 2-piece hat/rotor retains the stock parking brake and drops over 26 lbs of unsprung rotating weight off the rear
- 15mm rear spacers to get the perfect fitment for the included tires
- VTT wheel stud kit
Fitment Guide
Fitment confirmed on G80 M3 / G82 M4 / G81 M3 Touring / G83 Vert -
PTE – Precision Turbochargers
$2,234.49 – $4,428.99VTT is proud to offer PTE Turbocharger products! -
VTT “Game Changer” S58 Charge Air Cooler
$3,999.99 – $4,569.00VTT is proud to announce our “Game Changer” charge air cooler for the S58 G8X, and F9X X3/4M platforms! We have completed testing, and any production changes, and are happy to open Pre-orders for the coolers! While the factory charge air cooler is well done, and robust it leaves a lot to be desired on repeated pulls and ends up heat soaked very quickly. Using Proprietary US MADE “WAGNER Intercooler” Cores. We then couple that with CFD-designed runners, and end tanks that we have TIG welded right here in San Leandro California. With this strategy, we are able to take the limited space given to us by the factory, and add not only a larger more efficient core, but also much better designed/flowing runners, and end tanks. We also pack the unit with tons of awesome features, all at a great price! Pricing is as follows:- DI Manifold only - Raw Aluminum - $3999
- PI Manifold with Fuel Rail and PI provisions - Raw Aluminum - $4199
- DI Manifold only - Cerakoted with thermal Dispersion OR custom color - $4369
- PI Manifold With Fuel Rail and PI provisions - Cerakoted with thermal Dispersion OR custom color - $4569
-
VTT is proud to offer high-performance drop-in replacement filters for the F Series BMW B58. These filters are custom-made for VTT. They are made with a heat-resistant silicone base, a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. We designed these to work with our Carbon Fiber intake Tops, but hese filters will also work perfectly with the stock tops. We offer them in two colors. Red, and Black Features:
- 50 States Emissions Legal
- Easy to install 15-30 minutes even for a novice
- Filters can be cleaned forever meaning never buy new filters
- Completely reversible if you ever want to remove
-
VTT is proud to announce the first of our upcoming carbon fiber product line. The BMW S58 G8X M3/4 Carbon fiber intakes! BMW did a wonderful job designing these intakes and we have found they are only slightly restrictive at elevated power levels, mostly due to the secondary filter inside, and the factory paper filter. Beware of companies selling expensive intake systems, or cone set up, with a single dyno comparison claiming big gains. The factory setup is EXTREMELY efficient with only a couple of small changes. With this in mind, we decided to just take their cues, and make factory-style carbon fiber intake tops with no secondary filters, and high flow cotton pre-oiled filters. These are 8 layers of 100% carbon not a single layer wrapped over plastic and they are 1.3MM thick with our logo vacuum printed onto the tops, with a UV resistant gloss clear coating. This is not only strong but will resist discoloration for an extended period of time. The filters themselves are made with a heat-resistant silicone base, a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow.
Filters are available by themselves for a flow upgrade while keeping the stock look here - https://vargasturbo.com/product/vtt-2021-bmw-m3-m4-high-performance-drop-in-air-filter-upgrade/ Features:- 50 States Emissions Legal
- Easy to install 15-30 minutes even for a novice
- Beautiful Carbon Fiber finish really adds class to the S58 engine bay
- Filters can be cleaned forever meaning never buy new filters
- Up to 13WHP gains
- Completely reversible if you ever want to remove
Fitment: 2021+ BMW
- G80 M3
- G82 M4
- G83 M4 Convertible
-
VTT is happy to offer custom tig welded 304 Stainless N54/N55 equal-length turbo manifolds. These are perfect for someone trying to fabricate a twin-turbo setup, and needs manifolds. The flange will fit any Garret turbo from GT series, GTX series, and G-Series G25, and G30 V-band.
These are sold as a set of TWO
-
Sale!
VTT-FAB S55 Factory Control EWG Top Mount Single Turbo Manifold
$1,999.00$1,949.00Are you looking to fab up your own S55 Single kit, but want our game-changing factory control via Turbosmart Straight gate? Yep, we offer that. This manifold is fully fabricated in-house using 321 1.25" Sch 10 Weld els, our own wire cut flange, and cast 6 into 1 Collector. We also fab the Turbosmart straight gate port which will provide perfect fitment for our factory-controlled setup. this manifold is designed to work with T3 V-Band inlets such as Garret G25, G30, G35, PTE T3 Size V-band inlet turbos, and Turbosmart T3 V-Band inlet turbos. This kit will require the use of our VTT-FAB Factory controlled External Straight gate set up, which can be purchased separately, and can be added from the drop-down. Features:- Fully Fabbed in-house in Hayward Ca using US-sourced parts
- All Tig Welded
- 6 into Cast Collector that fits most T3 Small Frame Style V-band flanges (choose turbo chose from the drop-down)
- Fully set up for our VTT-FAB factory-controlled turbo smart straight gate. Making this plug-and-play with your existing tuner
- 321 Stainless Weld Els for the ultimate in heat resistance and durability
- 1.25" Primary for lightening spool, and high exhaust gas velocity
- Works with VTT-FAB Fitting adapters
-
Looking to protect your single turbo investment, dont have a ton of room, and need a low profile filter that can flow what you need? VTT Has you covered with our Low Profile Single turbo Air Filters. These filters are custom-made for VTT. They are made with a heat-resistant silicone base, and a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. We currently offer them in Black, and 3 flange sizes. 3", 4" and 5" flange. With two filter heights. Tested at over 1200WHP with no loss of power observed. Filter Options - Offered in White, and Black with the following dimensions Short - 3.75" Tall, 7.5" OD Large end, 5" Small end 3", 4", or 5" Flange Tall - 4.5" Tall, 7.5" OD Large end, 5" Small end 3", 4", or 5" Flange
-
Sale!
BMW Factory OEM EWG Actuator Replacement – 11 65 8 691 853
$499.00$349.00Looking to replace your damaged factory BMW Actuator part number - 11658691853 VTT has located and ordered in bulk these actuators, and offer them at a discounted price. These are 100% FACTORY BMW OEM actuators, not aftermarket. Fitment is for the following, but they work to replace basically any BMW Actuator. -
While BMW did a beautiful job on the F9X X3/4M's they sure decided to get cheap out on the strut bars. Ugly steel bars with no real pop or aesthetically pleasing qualities seem like an afterthought to such a well-thought-out car. Well, here at VTT we decided to do something about it, and immediately took our bars off, and let our engineers go to work on a solution. What they came up with is beautiful, and functional. 100% CNc machined from 6061-T6 aluminum and anodized in a variety of colors The result adds a gorgeous look to your X3/4M engine bay, and what BMW should have done from the factory. Pair these with our beautiful center strut bar for the complete set-up!
-
VTT Crank Hub Install Special!
$2,000.00VTT is happy to announce our Spline lock Crnak Hub special! We are offering COMPLETE crank hub service for N54, N55, And S55 using our Spline Lock hubs for $2000 out the door, this includes all parts, and labor required. The usual turnaround time is 2 days, but we can get them done in one day if early morning drop-off is done. Our shop is in Hayward, CA 94541, and we are currently taking appointments to fill up our calendar through the holidays!If you are interested, please email [email protected] with the words "Crank Hub Appointment" in the title, and we can get back to you with an open time slot ASAP. Thank you!
AGAIN: Once purchased you MUST email [email protected] to schedule an appointment. You CANNOT show up until you have appointment CONFIRMATION.
-
VTT Physical Gift Cards
$50.00 – $1,000.00Give the Gift of VTT! Looking to get your friends, or family some go-fast parts, and no idea what they need, only that they love VTT? Well, our Gift Cards have you covered! They come in $50, $100, $250, $500, and $1000 increments. Each gift card is precision cut out of plastic in the shape of the VTT logo and has the dollar amount and the code on the back. Each gift code is unique and is locked to that card. To redeem simply enter the code during check out it will remove that amount, and if you have any leftover it will go back to the card.
You can choose to have your card physically mailed to you, or a virtual card where we can send you a scan of your card.
-
Sale!
TOYOTA B58B30 STROKER KITS
$7,229.99 – $7,559.99VTT Is proud to offer the BC stroker kit for the Toyota B58B30 engine platform that incorporates a 100mm stroke, steel billet crank, BC 4340 Pro Series Heavy-Duty connecting rods rated to 1600+ horsepower. -
Sale!
N54 Stage 3 VTT VTR (Limited Fitment)
$9,619.99 – $10,249.99WHP Level supported (with proper fuel, upgrades, and tuning) 500 - 800WHP -
Sale!
N54 Stage 3 VTT VTX-R (Limited Fitment)
$9,979.99 – $10,339.99WHP Level supported (with proper fuel, upgrades, and tuning) 500 - 900WHP
