-
Sale!
VTT Billet Check Valves
$24.99 – $29.99VTT CNC Billet check valve that can be used for a variety of uses including a vacuum/boost check valve when removing the stock PCV system, and still wanting to run vacuum to the crankcase. Rated at over 100 psi, with a cracking psi of .25psi. -
VTA Breather
$39.99Not available for single can external PCV Valve. -
VTT 8V RS3 DSG Catch Can
$229.99VTT is proud to announce our 8V RS3 DSG catch can set up. Tired of DSG oil spewing all over your engine on hard launches? this kit will fix that issue at a low price and look great while doing it. What is happening is the fluid gets hot and expands there is a breather on top of the trans, and if the fluid expands enough it is pushed out of the breather up the tube, and out the vent onto your engine. This kit prevents that by allowing the fluid to be pushed up into the can while hot, and drain back into the trans once it cools down. As with our Engine catch can these use our already extremely popular modular catch can, and couples it with a custom CNC 6061 bracket, VTT -6AN to barbed fitting. Install is simple, takes about 15 minutes to an hour depending on your skill level, and requires removing the intake to gain easier access. This is the perfect complement to our RS3 engine side catch can, as they mirror each other in the engine bay. Kit Break down is as follows:- One Catch Can
- One CNC 6061 bracket
- One -6AN to barbed fitting
-
VTT RS3/TTRS Ultimate Front Drag Brake Kit
$1,159.99 – $1,849.99Looking to make you Rs3/TTRS faster in the 1/4 mile or 1/2 mile racing? Want to run 17, or 15" wheels, and slicks in the front? Want to drop close to 65lbs of weight off the front of the car at the same time? Do not want to break the bank while doing so? Look no further than the VTT Ultimake Front Drag kit for the Rs3/TTRS. This kit will allow you to run the wheel/tire combo you need to drop your ET's all while putting the car on a significant diet over the stock front brake set up. The kit is a true plug and play set up using Genuine Wilwood parts, coupled with DOT-approved brake lines, CNC rotor hats/brackets, and a CEL eliminator harness for the brake sensor. This kit comes in 3 different variations in 2 different caliper sizesDisclaimer: The HD kits are designed for street use, and drag racing. Never use for heavy braking racing environments such as Auto-X or Road Racing. Scalloped kits should never be used for street driving, and are ONE-PASS COOL DOWN DRAG RACING ONLY, EVEN IN THIS ENVIRONMENT, THEY MAY CRACK IF USED TOO AGGRESSIVELY. Always drive within your limits!
-
VTT 8V RS3/8S TTRS Silicone Charge pipes
$229.99 – $449.99VTT is proud to offer the very best charge pipe solution for the Audi 8V RS3 platform. This system completely does away with the restrictive, and muli-connection stock charge pipe system, and replaces it with two single 6-ply, Heat Resistant, Wire reinforced silicone charge pipes rated at over 200 psi. They are molded for the perfect fit in your engine bay, while not sacrificing anything in the way of flow or size. They also completely isolate your charge air from any additional heat soak coming in from the engine or ambient heat. -
This harness allows you to run aftermarket brakes and not have the brake warning light on the dash due to the brake pad wear sensor being left unplugged. Direct plug, and plug, unplug the wear sensor and plug this in. Nothing else is required. Kit includes: One harness
-
Looking to make you Rs3/TTRS/MK7R faster in the 1/4 mile or 1/2 mile racing? Want to run 15" wheels, and slicks in the rear? Want to drop close to 20lbs of weight off the rear of the car at the same time? Do not want to break the bank while doing so? Look no further than the VTT Ultimate Rear Drag kit for the Rs3/TTRS/MK7R. This kit will allow you to run the wheel/tire combo you need to drop your ET's all while putting the car on a significant diet over the stock rear brake set up. The kit is a true plug and play set up using Genuine Audi Calipers, coupled with StopTech Slotted rotor, or Bosch plain rotors, and CEL eliminator harness for the brake sensor. This kit also keeps your factory Electronic E-brake for burnouts.
-
VTT Audi 2.5TSFI Modular External PCV Plate
$229.99 – $779.99Modifying your Audi 2.5TSFI engine for more power, want to get rid of the problematic PCV set up which is hard to modify, and pulls oil from the crank into the combustion chamber via ports on the cylinder head? Using this plate will close off the factory PCV ports, and allow you to run an external PCV set up of your choice. We made the plate modular so you can use any of our myriad of fittings we already offer for popular BMW PCV systems, and catch cans. Go from mild to wild, and anywhere in between using our fittings, vacuum relieves, and check valves. We also offer complete kits with catch cans, and all hoses, and fittings for a plug, and play system to fully convert your Audi external PCV. -
VTT “1.4” Kit for Audi/VW Platforms
$4,519.99 – $5,459.99VTT Is proud to announce our "1.4" kit for VW/Audi Platforms. This kit is a COMPLETE kit for AWD vehicles looking to maximize their traction at the drag strip. This set up virtually guarantees a 1.4 or better 60 ft time, and your best ET before installing. The kit includes EVERYTHING needed to convert the vehicle to 15" wheels/Slicks at all 4 corners. -
Sale!
VTT Audi/VW/Porsche Billet Oil Cap
$59.99$54.99Looking to spice up the engine bay of your Audi/VW or Porsche without spending a ton of money. Our Billet Oil caps come in 5 colors and will look great in any engine bay. CNC machined from a billet of 6061-T6 Aircraft aluminum they sport a factory fit and finish with a Viton O-ring for long a leak-free life. They fit a WIDE variety of vehicles and directly replace your factory oil cap. -
One Ethanol Racing Fuel
$69.99 – $559.99Please note: Due to heavy increases in freight costs we have had to raise prices by $50 on 54-gallon drums, and $15 on pails.
VTT is proud to be the West Coast dealer for One Ethanol racing fuel.
We have two blends available in 5-gallon pails and 54-gallon drums. See below for descriptions of both fuels
Fuel is available for local pick up only unless you email, and make arrangements for freight shipping. Be aware fuel is considered hazmat and the freight charges are equal to or more than the fuel in all instances. Fuel CANNOT be shipped normal shipping methods such as UPS, FED EX, etc
-
Sale!
VTT VAG(VW/Audi/Porsche) Billet One Way Crankcase Breather
$149.00$119.99VTT VAG Billet One Way Crankcase Breather
VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL VAG (VW/AUDI/Porsche) applications that use the latch type in the photos(full application list below). With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.
