VTT/VAG 5×112 to 5×114 Bolt Pattern Conversion Kits

Description

Looking to convert your 5×112 M14x1.50 VAG vehicle to 5×114 to open up your wheel options? We got covered with our VTT wheel stud conversion kits. These kits are forged cold-rolled steel in 10.9 class, with corrosion-resistant coating for years of use, and convert your vehicle to M12x1.50 wheel studs which allow you to fit 5×114 wheels with no other changes.

No wobble bolts or redrilling here. Simply install the studs, put the wheel on, and lug nuts will center the wheel, these make the wheels LUG CENTRIC.

We offer these in one length These are 75″ total length, with 53″ shank length. This kit is Black Studs with Black Lugnuts, and we offer it in 10 or 20 pieces if you want to do only the front/rear or both.

Included in every kit:

• 10 or 20 M14x1.5 to M12x1.50 CONVERSION Wheel studs in Black
• 10 or 20 M12x.1.5 19mm Black opened ended lug nuts

Note: Apply lock tite to the studs (short thread end) and torque to 10 ft/lb. Lug nuts should be torqued to OEM specifications. For your safety retorque all hardware (studs and nuts) after 25-50 Miles

PLEASE NOTE – THESE STUDS WILL ONLY WORK IF YOUR WHEELS ARE DRILLED M14 THESE WILL NOT WORK FOR WHEELS DRILLED M12!

DO NOT USE ANY HUB-CENTERING SLEEVES WITH THESE CONVERSION STUDS, THE LUGS WILL CENTER THE WHEELS. THE USE OF A CENTERING SLEEVE MAY LEAD TO STUDS BREAKING. FOR INSTALLATION YOU MUST SNUG EACH LUG UP SLOWLY, AND IN A STAR PATTERN TO GET THE WHEEL CENTERED ON THE LUGS, FAILURE TO DO SO CAN ALSO LEAD TO FAILURE.