VTT/Rota 15″ Wheels for VAG Platforms

$349.99

9 in stock (can be backordered)

Finally a reasonably priced set of  Custom 15″ wheels in for VAG guys!
These are DIRECT plug, and play as long as you have the proper brakes such as our brake kits https://vargasturbo.com/product-category/vw-vag/audi-8v-rs3-ttrs/brake-wheel-audi-8v-rs3-ttrs/
Specs as follows:
  • 15×9″
  • 5×112 Pattern
  • Conical Seat (We Recommend running Wheel studs, and the proper lug nut, can be added below)
  • ET+36 Offset
  • 57.1 bore
  • Drilled for 14mm bolts or studs.
  • 15.5OZ lbs per wheel
No adapters, no hub-centric rings needed, etc. A 15″ wheel designed for the VAG platforms.

The price is per wheel + shipping.

9 in stock (can be backordered)

These wheels change to a conical seat. Get the right lugs, AND make it much easier to change between your street, and drag set up with a VTT wheel stud kit! Each kit is 5 Studs and nuts per wheel.

Warranty: 12 Months

Don't forget out brake kits to ensure proper fitment!

VTT RS3/TTRS/MK7 Golf R Ultimate REAR Drag Brake Kit

Looking to make you Rs3/TTRS/MK7R faster in the 1/4 mile or 1/2 mile racing? Want to run 15" wheels, and slicks in the rear? Want to drop close to 20lbs of weight off the rear of the car at the same time? Do not want to break the bank while doing so? Look no further than the VTT Ultimate Rear Drag kit for the Rs3/TTRS/MK7R. This kit will allow you to run the wheel/tire combo you need to drop your ET's all while putting the car on a significant diet over the stock rear brake set up.

The kit is a true plug and play set up using Genuine Audi Calipers, coupled with StopTech Slotted rotor, or Bosch plain rotors, and CEL eliminator harness for the brake sensor. This kit also keeps your factory Electronic E-brake for burnouts.

SKU: VTT-ROTA-VAG Categories: , , , , ,

Description

Finally a reasonably priced set of  Custom 15″ wheels in for VAG guys!
These are DIRECT plug, and play as long as you have the proper brakes such as our brake kits https://vargasturbo.com/product-category/vw-vag/audi-8v-rs3-ttrs/brake-wheel-audi-8v-rs3-ttrs/ 
Specs as follows:
  • 15×9″
  • 5×112 Pattern
  • Conical Seat (We Recommend running Wheel studs, and the proper lug nut, can be added below)
  • ET+36 Offset
  • 57.1 bore
  • Drilled for 14mm bolts or studs.
  • 15.5OZ lbs per wheel
No adapters, no hub centric rings needed, etc. A 15″ wheel designed for the VAG platforms.
Using a similar wheel we cut a 1.47 60ft, a Customer has cut a high 1.3X 60 ft on them. They flat out work if you are looking for a lot of traction for a reasonable cost.

Fitment

Fitment confirmed on TTRS, RS3, Golf R, GTI, A3, S3, etc. These will NOT fit on the TTRS unless many front suspension parts are changed
 
The price is per wheel + shipping.

Additional information

Weight 18 lbs
Dimensions 17 × 17 × 11 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Title

Go to Top