-
VTT BMW Billet One-Way Crankcase Breather
VTT is proud to introduce the first and only plug-and-play crankcase breather kit designed for BMW applications utilizing the two-prong oil cap style.
Installation is simple—remove your factory oil cap, install the breather, and immediately:
- Reduce crankcase pressure
- Improve turbo oil drainage
- Free up horsepower
- Add a clean, performance-focused look to your engine bay
Versatile Performance
This breather can be:
- Used with the stock PCV system to relieve crankcase pressure
- Paired with aftermarket PCV setups for maximum pressure relief
Premium Construction
Machined from 6061-T6 billet aluminum and anodized black for durability and corrosion resistance, the VTT breather is built to perform.
Features include:
- (4) Stainless steel internal baffles for superior oil control
- PTFE one-way check ball
- High-quality breather filter
- Secure clamp system
Together, these components ensure crankcase pressure is properly vented while maintaining effective oil separation.
Fitment
This breather fits most (not all) BMW engines utilizing the two-prong oil cap, including but not limited to:
- N54, N55, S55
- S54, S85
- S63, S63TU, N63
- Most BMW diesel models
⚠️ Important Notes:
- Fitment may vary depending on valve cover design and surrounding components
- We do not recommend use on S63, S63TU, or S68 platforms (F90, G90 M5, etc.)
- Installation on non-recommended applications is at your own risk and renders the item non-returnable if used
-
VTT CNC Billet check valve that can be used for a variety of uses including a vacuum/boost check valve when removing the stock PCV system, and still wanting to run vacuum to the crankcase. Rated at over 100 psi, with a cracking psi of .25psi.
-
NGK 95706 Spark plug set required for running 100% e85, and high boost on many BMW applications, including N54, N55, S55, etc. Plugs can be bought as a set of 6. You can add pre-gapping for an additional charge
-
VTT "Spline Lock" Crank Hub System – N54 / N55 / S55
VTT is proud to offer the only complete crank hub solution for BMW N54, N55, and S55 engines that does not require drilling the crankshaft for pins.
Our innovative hub features proprietary Spline Lock Technology—a high-tolerance, precision-machined spline system that presses into the crank and positively locks the hub in place, eliminating the need for traditional pinning or welding.
After months of rigorous development and over 10 different prototype revisions, our final production version was put to the test. In our in-house trials, the hub outperformed expectations—breaking our testing rig before it ever slipped. Real-world validation has been conducted on the VTT N54 race car, which spins to 8,000 RPM and produces over 900 WHP.
Key Benefits:
-
No crank drilling required – stock-like installation
-
Minimal labor – fully reversible with no permanent modification
-
Tested to extreme conditions – race-proven at high RPM and power
-
Exclusively compatible with VTT’s Crank Bolt Capture (CBC) for maximum security
⚠️ Spline Lock hubs are recommended be used with the VTT Crank Bolt Capture system. They are not intended to run independently.
-
-
VTT Billet CNC Oil Caps
Upgrade your BMW engine bay with a touch of precision and durability. VTT Billet CNC Oil Caps replace the factory plastic cap with a high-quality, performance-focused alternative.
-
Premium Materials – Machined from 6061-T6 aircraft-grade aluminum with stainless steel locking tabs for a secure fit and long-lasting reliability.
-
Anodized Finishes – Available in red, black, blue, purple, gold, or clear anodizing to match your build’s style.
-
Perfect Fitment – Designed for all BMW engines with a two-prong locking tab oil cap design, including (but not limited to):
THIS CAP DOES NOT FIT, B58TU, S58, A90/91 SUPRA, THIS ONLY FITS 2 PRONG CAP STYLE
-
-
VTT BILLET BMW N54/55 Crank Seal Guard.
It is a well-known issue on the BMW N54/N55/S55 platforms that your serpentine belt can fail for various reasons, when this happens you have a high chance of the belt getting sucked behind the front damper, and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure, even if you do not lose the engine it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT Even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. -
VTT S55/N55 EWG Billet Aluminum Valve Cover
Performance. Durability. Style.
VTT is proud to introduce the S55/N55 EWG Billet Aluminum Valve Cover — engineered for enthusiasts who demand performance and reliability without compromising design. Whether you’re replacing an aging OEM plastic cover or running a single turbo conversion that requires better clearance and heat resistance, this cover delivers on every front.
Designed to eliminate the failure-prone factory PCV system, the VTT Billet Valve Cover gives you complete control over your crankcase ventilation setup. Each unit is fully baffled to reduce oil carryover and maintain clean, efficient crankcase operation. For best results, pair it with a quality catch can system.
Valve Cover Features
-
100% CNC-Machined from 6061-T6 Billet Aluminum – Exceptional strength, precision, and durability
-
Anodized Finish in Multiple Colors – Choose a clean, custom look for your engine bay
-
Lightweight Design – 9.7 lbs (compared to 7.9 lbs stock; only a 1.8 lb difference)
-
Fully Modular PCV Configuration – Configure your PCV system exactly how you want it
-
Fully Baffled Ports – Prevents oil escape and ensures consistent crankcase pressure
-
Ideal for Single Turbo Conversions – Provides improved clearance and superior heat resistance
-
Durable & Reliable Construction – A significant upgrade from the OEM plastic cover
-
-
Our studs are forged from cold-rolled 10.9-class steel and finished with a black oxide corrosion-resistant coating, ensuring years of dependable service in both street and motorsport environments.
We offer one optimized size: 85mm overall length, with the following breakdown:
-
75mm total thread length
-
10mm bull nose for smooth lug engagement
-
12mm short-thread section (hub side)
-
12mm unthreaded shank
-
48mm long-thread section (lug nut side)
These studs are coated using Black Oxide, which does protect, BUT even when using Black Oxide, the studs CAN develop surface rust if left to the elements. We suggest a slight coat of WD-40 when you clean your wheels to prevent this.
These studs are coated using Black Oxide, which does protect, BUT even when using Black Oxide, the studs CAN develop surface rust if left to the elements. We suggest a slight coat of WD-40 when you clean your wheels to prevent this.
-
-
Looking to convert your 5x112 M14x1.25 vehicle, such as A90/91 Toyota Supra, and 2020+ BMW G-series, to 5x114 to open up your wheel options? We got covered with our VTT wheel stud conversion kits. These kits are forged cold-rolled steel in 10.9 class, with Black Oxide corrosion-resistant coating for years of use, and convert your vehicle to M12x1.50 wheel studs, which allow you to fit 5x114 wheels with no other changes. No wobble bolts or redrilling here. Simply install the studs, put the wheel on, and the lug nuts will center the wheel. This kit is Black Studs with Black Lugnuts, and we offer it in 10 or 20 pieces if you want to only do the front/rear or both.
Our studs are forged from cold-rolled 10.9-class steel and finished with a black oxide corrosion-resistant coating, ensuring years of dependable service in both street and motorsport environments.
We offer one optimized size: 85mm overall length, with the following breakdown:
-
75mm total thread length
-
10mm bull nose for smooth lug engagement
-
12mm short-thread section (hub side)
-
12mm unthreaded shank
-
48mm long-thread section (lug nut side)
PLEASE NOTE – THESE STUDS WILL ONLY WORK IF YOUR WHEELS ARE DRILLED M14 THESE WILL NOT WORK FOR WHEELS DRILLED M12!
These studs are coated using Black Oxide, which does protect, BUT even when using Black Oxide, the studs CAN develop surface rust if left to the elements. We suggest a slight coat of WD-40 when you clean your wheels to prevent this.
DO NOT USE ANY HUB-CENTERING SLEEVES WITH THESE CONVERSION STUDS, THE LUGS WILL CENTER THE WHEELS. THE USE OF A CENTERING SLEEVE MAY LEAD TO STUDS BREAKING. FOR INSTALLATION YOU MUST SNUG EACH LUG UP SLOWLY, AND IN A STAR PATTERN TO GET THE WHEEL CENTERED ON THE LUGS, FAILURE TO DO SO CAN ALSO LEAD TO FAILURE.
-
-
VTT Billet Wheel Spacers
VTT is proud to offer billet wheel spacers for most VAG, BMW, and the A90/91 Toyota Supra platforms.
Each spacer is:
-
CNC-machined from 6061-T6 aluminum
-
Hard anodized black for a long, corrosion-free life
We offer multiple fitments and sizes to suit a wide range of applications.
THESE ARE SOLD INDIVIDUALLY, FOR ONE AXLE ORDER TWO FOR A COMPLETE SET ORDER FOUR.
ANYTHING OVER 5MM WILL REQUIRE LONGER BOLTS OR STUDS. YOU CAN CHOOSE TO ADD A VTT WHEEL STUD KIT FROM THE OPTIONS.
PLEASE DOUBLE CHECK YOUR BOLT PATTERN AND HUB BORE BEFORE YOU ORDER. INSTALLED SPACERS CANNOT BE RETURNED!
-
-
VTT is proud to offer Titanium wheel stud kits for the owner looking for the lowest possible unsprung weight while maintaining high strength, and good looks as all come with an amazing burnt finish. This kit is 60% lighter than factory steel studs and nuts with a total kit of 20 nuts, and studs being 3.1LBS. Sets of 10 are 1.55 lbs
-
VTT High-Performance Ignition Coils
BMW N5X • B58 / S58 / B48 • VAG Platforms
Vargas Turbo Technologies (VTT) is proud to offer high-performance ignition coil upgrades for BMW N5X platforms, B58/S58/B48 engines, and select VAG applications.
Development & Testing
Our ignition coil program began with extensive outreach to multiple OEM and aftermarket coil manufacturers. We commissioned individual prototype coils, then subjected them to rigorous, repeatable testing in the United States to ensure they matched or exceeded factory performance standards.
Only the highest-performing designs were selected and produced to VTT’s exact specifications and colorways. These are not rebranded or cosmetic coils—each set is performance-validated.
-
Do you work on BMW engines across multiple platforms? Tired of modifying universal engine stand plates just to make them fit? Frustrated by losing access to the flywheel side once the engine is mounted?
We were too—so we built the solution.
The VTT BMW Engine Stand Plate is a true bolt-on design that keeps the flywheel end fully accessible while providing a strong, stable mounting solution for your engine builds.
Machined from solid 6061-T6 billet aluminum and anodized in five colors for long-term durability and corrosion resistance, these plates are lightweight yet rated for over 1200 lbs.
Fitment: N54, N55, S55, B58, S58 (more coming soon)
Note: The stand tube is 60mm or 2.36” OD, which fits most engine stands, but not all—please measure before purchasing.
Key Features:
- Lightweight, high-strength billet 6061-T6 construction
- Durable anodized finish
- Direct bolt-on to intake-side motor mount location
- Full clearance for accessories and flywheel/flex plate access
- Built-in provisions for locator pin and rotation bar
-
Tired of your Dragy flying all over the car as you try to do runs? Tired of low sats or no sats warning due to improper location of the Dragy in the vehicle? Well say goodbye to those issues with our new Carbon Fiber and Plastic Dragy holders. These are made from either 100% Pre-Preg Carbon Fiber, or molded plastic for a perfect fit. The carbon fiber gives it just the right look to add to your performance vehicle! Each holder has dual Suction cups and will stick to any smooth surface. We suggest mounting them in the upper left or right corner of your windshield with a full view of the sky. Dragy holder features
- Stop your Dragy from flying off the dash, and having to search for it
- Position your Dragy in the optimal position for the best satellite coverage
- VTT Dragy holder exposes the entire top of the Dragy so nothing is blocking the receiver from the Satellite
- The charging port is not blocked and can be accessed with the cover on
- Choose from REAL Carbon Fiber or Molded Plastic
-
VTT is proud to offer our Billet Aluminum DCT Transmission Pan – the ultimate upgrade over the factory plastic pan.
CNC-machined from 6061-T6 aluminum and anodized in a variety of colors, this pan not only adds strength and durability but also nearly doubles fluid capacity for improved cooling and performance. With added serviceability features and premium components, this is the last DCT pan you’ll ever need.
Key Features
-
6061-T6 Billet Construction – Stronger and longer-lasting than the stock plastic pan.
-
Increased Fluid Capacity – 2000ML vs. the OEM 1150ML — an 80% increase.
-
Cooling Efficiency – Machined external fins to aid heat dissipation.
-
Built-In Protection – Integrated rare-earth magnet pulls metal debris from the fluid.
-
Premium Sealing – Reusable US-made Viton gasket for a leak-free seal.
-
Easy Servicing – Includes a -6 ORB drain plug for quick and clean fluid changes.
-
Anodized Finish – Available in multiple colors for long-lasting corrosion resistance and style.
-
-
Introducing the VTT OBD-LOCK – Enhanced Security & Improved Design!
We are excited to announce our OBD-LOCK! This latest version has been completely redesigned for improved strength, ease of installation, and enhanced protection. Key upgrades include:
No more OBD port penetration – eliminates any risk of damage
Revised thread style – prevents stripping for a secure fit
Stronger, more durable design – ensures maximum securityUltimate OBD Port Protection
The VTT OBD-LOCK is precision-machined from billet 6061-T6 aluminum and is engineered to completely lock out your OBD port, preventing unauthorized access.
Anti-Theft Protection – Prevents thieves from accessing the OBD port to duplicate keys or disable security systems
Dealer/Tech Lockout – Stops unauthorized tune changes or system modifications
Tamper-Proof Design – Cannot be removed without physically destroying the OBD port unless the correct tool is usedVTT OBD-LOCK – Version 2 NON-GM
Universal Fit for All Non-GM (General Motors) VehiclesThis device is compatible with all non-GM vehicles, including but not limited to:
-
All VAG group vehicles (VW, Audi, Bentley, etc.) — including recessed port VW/Audi models
-
Ford, Nissan, Honda, Toyota, Porsche, Dodge, Ram, Jeep, Kia, Subaru, and more
Not compatible with GM (General Motors) vehicles.
VTT OBD-LOCK – Version 2 GM
Universal Fit for GM (General Motors) Vehicles ONLYThis version is specifically designed for General Motors vehicles, including GM, Chevrolet, Cadillac, Holden, and other GM-branded models.
If your vehicle is anything other than a General Motors product, you will need the Non-GM version.
-
-
VTT Billet Velocity Stack (V-Stack)
3" • 4" • 5" Inlet Sizes
Running an open turbo and want to straighten airflow into the compressor for maximum efficiency? The VTT Billet Velocity Stack is exactly what you need.
Backed by fluid-dynamics principles, a proper bellmouth / velocity stack smooths incoming airflow, reduces turbulence, and improves air entry into the turbocharger—or intake on naturally aspirated applications. Unlike thin, stamped alternatives, our V-Stacks are precision-machined for strength, consistency, and performance.
Each unit is CNC-machined from 6061-T6 billet aluminum and anodized for durability and corrosion resistance. Available in 3", 4", and 5" inlet sizes, these stacks are designed to fit any intake tubing or turbocharger inlet of the corresponding diameter.
-
Looking to protect your single turbo investment, dont have a ton of room, and need a low profile filter that can flow what you need? VTT Has you covered with our Low Profile Single turbo Air Filters. These filters are custom-made for VTT. They are made with a heat-resistant silicone base, and a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. We currently offer them in Black, and 3 flange sizes. 3", 4" and 5" flange. With two filter heights. Tested at over 1200WHP with no loss of power observed. Filter Options - Offered in White, and Black with the following dimensions Short - 3.75" Tall, 7.5" OD Large end, 5" Small end 3", 4", or 5" Flange Tall - 4.5" Tall, 7.5" OD Large end, 5" Small end 3", 4", or 5" Flange
-
VTT S55 Silicone Charge Pipes – BMW M3 / M4
Looking to get the most efficient turbocharger operation out of your S55-powered BMW? The best way to do that is by eliminating all restriction in the inlet and charge tract—starting with the factory charge pipes.
The OEM pipes are poorly designed and severely flattened as they exit the turbos before the intercooler, creating unnecessary restriction. VTT S55 Silicone Charge Pipes eliminate this bottleneck by providing a true, full 2" ID from the turbochargers to the intercooler, allowing maximum airflow and improved turbo efficiency.
Unlike aluminum pipes, silicone also prevents heat soak, keeping intake temperatures more consistent under hard driving.
These pipes are constructed from 7-ply, wire-reinforced silicone, with an additional inner silicone layer, and have been pressure tested to over 150 PSI for extreme reliability.
Available Color Options
-
Black exterior / Blue interior
-
Blue exterior / Red interior
-
Red exterior / Black interior
Fits all S55-powered BMW M3 & M4 models
-
-
The VTT S55 crank bolt capture. slips over the head of the crank bolt fully encapsulating it, and locks it to the crank hub, meaning it cannot back out no matter what.
-
Everything needed to a successful install without having to make a trip to the dealer.
-
WHP Level supported (with proper fuel, upgrades, and tuning) Stock-800WHP VTT S55 GC Turbochargers. GC stands for "Game Changers" and that is exactly what these do! They bring a fully new casting Stainless Steel turbine manifold/housing, all new compressor housing with single piece high flow inlet, as well as our tried, and true V2 GC CHRA with a Mar-M246 GTX28 profile turbine wheel, and custom compressor wheel. These turbos have NO core charges, keep your stock turbos, sell them, hold them if you want to go back to stock, etc. The turbos will come with custom VTT silicone inlet hoses to mate up with all inlets on the market making them 100% plug, and play. There is no better, more powerful, or well thought out upgrade on the market at any price point!
-
Please note: Due to heavy increases in freight costs we have had to raise prices by $50 on 54-gallon drums, and $15 on pails.
VTT is proud to be the West Coast dealer for One Ethanol racing fuel.
We have two blends available in 5-gallon pails and 54-gallon drums. See below for descriptions of both fuels
Fuel is available for local pick up only unless you email, and make arrangements for freight shipping. Be aware fuel is considered hazmat and the freight charges are equal to or more than the fuel in all instances. Fuel CANNOT be shipped normal shipping methods such as UPS, FED EX, etc
-
Looking to maximize your F or G Series BMW for drag racing? Want to be able to dial in the perfect amount of compression or rebound on your launch? The VTT Double adjust drag shock kit is just want the doctor ordered!
-
NGK 94201 Spark Plug Set — compatible with all S58 / B58 / B48 applications, and also ideal for N54 / N55 platforms running the B58 coil upgrade.
We recommend these plugs for vehicles running 100% E85, high boost, or upgraded ignition setups. They are an excellent choice for high-performance BMW applications including N54, N55, and S55 (with B58 coils), and they also serve as a great maintenance replacement for any S58/B58/B48-powered vehicle — at a significantly better price than most options on the market.
Plugs are sold as a set of 6.
Pre-gapping is available for an additional charge -
This is for those running our brake kits that use our 11.75" or 13" Rotors that want to easily change between rotors for dedicated drag racing and street use. You can now buy Rotor/Hat Assemblies by themselves to switch between any of our 3 options
The price is for ONE ROTOR / OR ONE ROTOR/HAT ASSEMBLY
-
Racing can be rough on brake pads, if you have worn through a set of pads while using your VTT brake kit you can buy replacement pads here. Different options are available as shown below. Please take a look at your pads to see the hole orientation which will determine your pad type BP-10 pads for Dynalite calipers Single hole in the pads for the location pin - Mostly street and some racing we recommend for rear kits BP-20 pads for Dynalite calipers Single hole in the pads for the location pin - More aggressive street driving, and racing recommended for front or rear kits BP-10 pads for Dynapro calipers with twin holes in the pads for the location pins - Mostly street and some racing we recommend for rear kits BP-20 pads for Dynapro calipers with twin holes in the pads for the location pins - More aggressive street driving, and racing are recommended for front or rear kits Hawk PC (Performance Ceramic) Very Quiet, Very low dust, Hawk claims 32% increase in stopping power over stock pads. A good balance of street, and aggressive driving. Recommended for front or rear kits
MANY MORE AGGRESSIVE BRAKE PAD COMPOUNDS EXIST FROM VARIOUS MANUFACTURERS, AND YOU CAN TAILOR TO YOUR NEEDS. Y OU CAN FIND THESE BY USING THE CALIPERS STYLE NUMBERS BELOW.
6-PISTON DYNAPRO PAD STYLE 6712
4-PISTON DYNAPRO PAD STYLE 7812
-
Need to replace the gasket on your VTT Aluminum VC? Simply choose your model from the dropdowns to ensure you get the correct version.
-
VTT is proud to announce our F8X Series S55 engine catch can set up. This kit uses our already extremely popular modular catch can, and couples it with a custom CNC 6061 bracket, VTT CNC banjo fittings, VTT 5 ply silicone hose, and Push lock fittings. Installation is simple, takes about 30 minutes to 2 hours depending on your skill level, and requires removing one factory hose to install the VTT hoses. Giving an OEM fit and finish when installed. Our kit stands out from others on the market by using high-quality AN fittings, and VTT Banjo adapters. This is the ONLY catch can kit that is plug, and play with our CNC Billet Valve cover
-
Need a replacement filter for your VTT Billet Crankcase breather? You can order on here. We offer them in 3 heights, low 48mm, medium58mm, and tall 68mm. This is measured from base to top. The filter will include a new clamp. For reference: N54/55 mostly use the low A90 Supra use Medium Most Audi applications can fit a tall, but measure your filter before ordering.
-
VTT is proud to offer a Titanium hardware upgrade for all our Billet and Cast VC's. This will come with M6x30 Ti bolts N54 /N55/S55/B58 Gen 1/ B58 TU it will be an Umbrella head with a 16.3mm head. These bolts weigh half as much as comparable steel hardware and look amazing. Colors to choose from will be Burnt, Black, and Natural (silver)
-
Show off your VTT support and get a good laugh from people with our "We Like To Party" License plate bracket. Born from the infamous quote in Talladega nights
-
VTT Billet Oil Filter Housing Cap – BMW N5X / S55 / N20
VTT is proud to introduce our billet aluminum replacement for the factory plastic oil filter housing cap. Built for both performance and style, this upgrade eliminates the weak OEM plastic cap while also removing the need for a special tool during filter changes.
-
Premium Construction – CNC-machined from 6061-T6 aluminum with precision cooling fins to help reduce oil temps.
-
Factory Functionality – Retains all OEM provisions for the filter basket, including the lower pins essential for proper bypass valve function.
-
Easy Serviceability – Features a 19mm hex head for quick installation and removal with standard tools.
-
Complete Package – Includes a new sealing O-ring and small O-ring for the filter cage.
-
Color Options – Available in Red, Black, Blue, and Clear anodizing.
-
Cohesive Design – Matches perfectly with our N5X Billet Oil Cap and N5X Billet Power Steering Cap for a clean, uniform look under the hood.
-
Bundle Option – Get all three caps (Oil Cap, Oil Filter Housing Cap, and Power Steering Cap) for $175 – a 10% savings.
-
-
VTT offers silicone hoses in various Push-lock sizes, we use these for our catch can kits, but they are also suitable for coolant, vacuum, boost, etc. Do not use with fuel. We offer: -10 Push Lock 24", and 18" -8 Push Lock 24", and 19.5" -6 Push Lock 24"
-
Do you work on a lot of BMW engines from various platforms? Do you ever struggle with heavy cylinder heads, either lifting off the engine or simply moving around? Ever ruined an EXPENSIVE multi-layer head gasket while trying to install a cylinder head due to no secure way to hold it without two people? We answered yes to all of those things, and came up with a tool for anyone that works on BMWs often, and needs a way to simply, and easily remove/install, or simply move around a cylinder head. These cylinder head tools are machined from a solid billet of 6061-T6 aluminum and anodized in 4 colors for long-lasting corrosion resistance. They are knurled for a non-slip grip when oily or wet, and positioned so the head is balanced when lifting The Head Handler fits the following engines, N54, N55, S55, B58, S58 and we offer short extensions for installation with no cams/Cam ledges on the head, or long extensions for people that want to install or remove a head with cams still installed. (B58 only requires short extensions)
-
VTT Billet Power Steering Cap – BMW
VTT is proud to introduce our billet aluminum replacement for the factory plastic BMW power steering cap. Designed to eliminate the weak OEM plastic cap, this upgrade delivers both durability and style while retaining all OEM functionality, including the built-in dipstick and vent provision.
-
Premium Construction – CNC-machined from 6061-T6 aluminum, anodized in your choice of finish.
-
Factory Functionality – Full dipstick and vent hole integration, just like OEM.
-
Cohesive Design – Matches perfectly with our N5X Billet Oil Cap and N5X Billet Oil Filter Housing Cap for a complete, uniform look.
-
Bundle Option – Order all three (Oil Cap, Oil Filter Housing Cap, and Power Steering Cap) for $175.
-
Color Options – Red, Black, Blue, and Clear anodizing.
-
-
Adding a Front-facing manifold to your N54, and need to extend your map sensor harness? We got you covered with our 24" extension harness. High-quality wiring, with seating, and our own 3D printed connectors ensure a perfect fit. Fits all N54, and very early N55, please check your plug connection on your map sensor before ordering
-
Give the Gift of VTT! Looking to get your friends, or family some go-fast parts, and no idea what they need, only that they love VTT? Well, our Gift Cards have you covered! They come in $50, $100, $250, $500, and $1000 increments. Each gift card is precision cut out of plastic in the shape of the VTT logo and has the dollar amount and the code on the back. Each gift code is unique and is locked to that card. To redeem simply enter the code during check out it will remove that amount, and if you have any leftover it will go back to the card.
You can choose to have your card physically mailed to you, or a virtual card where we can send you a scan of your card.
-
Please Note: This is a Virtual Gift Card. After purchase you will receive an email with your Gift Card code
-
VTT Billet Coolant Reservoir Cap – BMW
Upgrade your engine bay and eliminate the factory plastic with the VTT Billet Coolant Reservoir Cap. This CNC-machined aluminum cap replaces the OEM plastic unit, giving you strength, style, and long-term durability while retaining all OEM functionality. Simply snap the factory pressure-relief valve into place, and you’re ready to go.
-
Premium Construction – CNC-machined from 6061-T6 aluminum.
-
Factory Functionality – Accepts the OEM pressure-relief insert for proper venting.
-
Cohesive Design – Matches our N5X Billet Oil Cap, N5X Billet Oil Filter Housing Cap, and Billet Power Steering Cap for a uniform, high-end look.
-
Color Options – Available in Red, Black, Blue, and Clear anodizing.
-
