1.510.246.9977|Sales@Vargasturbo.com
VTT F9X X3/4M Rear Bushing Insert (Front Side Only)
VTT F9X X3/4M Rear Bushing Insert (Front Side Only) - Image 2
VTT F9X X3/4M Rear Bushing Insert (Front Side Only) - Image 3

VTT F9X X3/4M Rear Bushing Insert (Front Side Only)

$53.99

120 in stock (can be backordered)

-

Already have the VTT X3/4M rear diff bushing kit, and want to add the front side. This will allow you to buy it separately.  Adding in the front side increases installation time, and difficulty as the diff will need to be dropped, and a tool will need to be used to press in the front side bushing

Kit includes:

  • Front side bushing which will work in conjunction with the rear side to fully lock down the bushing. (Requires the diff to be lowered, and the insert pressed into the front)

All products that are designed to stiffen or reduce drivetrain movement inherently have the tendency to increase NVH or Noise, Harness, or vibration. While these bushings inserts have been found to add little NVH in most instances. Your results and sensitivity to NVH may vary. This product is designed to reduce drivetrain movement, and that was the goal when designing and manufacturing this product. Returns for NVH are not accepted once products are installed.

120 in stock (can be backordered)

Warranty: 12 Months

Dont forget your Transafer Case Bushing inserts, and Front Inserts!

IMG_3303

VTT F9X X3/4M Front Bushing Inserts

Looking to fix the diff bolt issue on your F9X X3/4M? VTT has taken a 3 pronged approach by offering a triple solution, one part of the solution is the front diff bushing inserts. These are pressed into the factory bushing, and fill the voids in the bushing. This keeps the stock bushing ride compliance but removes any unwanted movement. These are sold as a set

Kit includes:

  • Two Billet Bushing inserts
  • Two 46mm Hardened Steel Washers

Installation Guide - https://vargasturbo.com/wp-content/uploads/2024/01/VTT-F9X-X3-4M-Front-Bushing-insert-Install-Guide.pdf

All products that are designed to stiffen or reduce drivetrain movement inherently have the tendency to increase NVH or Noise, Harness, or vibration. While these bushings inserts have been found to add little NVH in most instances. Your results and sensitivity to NVH may vary. This product is designed to reduce drivetrain movement, and that was the goal when designing and manufacturing this product. Returns for NVH are not accepted once products are installed.

SKU: VTT-X3M-REAR-INSERT-FRNT-SIDE Categories: , , , ,

Description

Already have the VTT X3/4M rear diff bushing kit, and want to add the front side. This will allow you to buy it separately.  Adding in the front side increases installation time, and difficulty as the diff will need to be dropped, and a tool will need to be used to press in the front side bushing

Kit includes:

  • Front side bushing which will work in conjunction with the rear side to fully lock down the bushing. (Requires the diff to be lowered, and the bushing pressed into the front)

Additional information

Weight 1 lbs
Dimensions 6 × 6 × 6 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products

Go to Top