-
Introducing the VTT OBD-LOCK – Enhanced Security & Improved Design!
We are excited to announce our OBD-LOCK! This latest version has been completely redesigned for improved strength, ease of installation, and enhanced protection. Key upgrades include:
No more OBD port penetration – eliminates any risk of damage
Revised thread style – prevents stripping for a secure fit
Stronger, more durable design – ensures maximum securityUltimate OBD Port Protection
The VTT OBD-LOCK is precision-machined from billet 6061-T6 aluminum and is engineered to completely lock out your OBD port, preventing unauthorized access.
Anti-Theft Protection – Prevents thieves from accessing the OBD port to duplicate keys or disable security systems
Dealer/Tech Lockout – Stops unauthorized tune changes or system modifications
Tamper-Proof Design – Cannot be removed without physically destroying the OBD port unless the correct tool is usedVTT OBD-LOCK – Version 2 NON-GM
Universal Fit for All Non-GM (General Motors) VehiclesThis device is compatible with all non-GM vehicles, including but not limited to:
-
All VAG group vehicles (VW, Audi, Bentley, etc.) — including recessed port VW/Audi models
-
Ford, Nissan, Honda, Toyota, Porsche, Dodge, Ram, Jeep, Kia, Subaru, and more
Not compatible with GM (General Motors) vehicles.
VTT OBD-LOCK – Version 2 GM
Universal Fit for GM (General Motors) Vehicles ONLYThis version is specifically designed for General Motors vehicles, including GM, Chevrolet, Cadillac, Holden, and other GM-branded models.
If your vehicle is anything other than a General Motors product, you will need the Non-GM version.
-
-
The VTT S55 crank bolt capture. slips over the head of the crank bolt fully encapsulating it, and locks it to the crank hub, meaning it cannot back out no matter what.
-
VTT BMW Billet One-Way Crankcase Breather
VTT is proud to introduce the first and only plug-and-play crankcase breather kit designed for BMW applications utilizing the two-prong oil cap style.
Installation is simple—remove your factory oil cap, install the breather, and immediately:
- Reduce crankcase pressure
- Improve turbo oil drainage
- Free up horsepower
- Add a clean, performance-focused look to your engine bay
Versatile Performance
This breather can be:
- Used with the stock PCV system to relieve crankcase pressure
- Paired with aftermarket PCV setups for maximum pressure relief
Premium Construction
Machined from 6061-T6 billet aluminum and anodized black for durability and corrosion resistance, the VTT breather is built to perform.
Features include:
- (4) Stainless steel internal baffles for superior oil control
- PTFE one-way check ball
- High-quality breather filter
- Secure clamp system
Together, these components ensure crankcase pressure is properly vented while maintaining effective oil separation.
Fitment
This breather fits most (not all) BMW engines utilizing the two-prong oil cap, including but not limited to:
- N54, N55, S55
- S54, S85
- S63, S63TU, N63
- Most BMW diesel models
⚠️ Important Notes:
- Fitment may vary depending on valve cover design and surrounding components
- We do not recommend use on S63, S63TU, or S68 platforms (F90, G90 M5, etc.)
- Installation on non-recommended applications is at your own risk and renders the item non-returnable if used
-
VTT Universal Turbo Fittings – Oil & Coolant Solutions for BMW Turbo Builds!
Looking to fabricate your own turbo kit for BMW platforms? Need an easy solution to block off water lines or create custom feed and drain fittings? Look no further! VTT offers a wide range of high-quality oil and coolant fittings to simplify your build. Our fittings are designed for most late-model BMW platforms, providing a plug-and-play solution for custom turbo setups. 📌 Available Fitting Options: 🔹 Oil Feed – -4 AN Male 🔹 Oil Drain – -10 AN Male 🔹 Coolant Fittings – Barbed Male or Block-Off Options -
VTT Upgraded Silicone N54 Coolant Hose Kit
Upgrade Your N54 Cooling System with High-Performance 6-Ply Silicone Hoses. NOW WITH TWO FITTING CHOICES! Billet or OEM Style
Looking to replace your worn-out N54 coolant hoses with a high-quality, durable upgrade? Want a cost-effective solution without opting for billet adapters? Vargas Turbo Technologies (VTT) has you covered!
We now offer our N54 upgraded silicone coolant hose kits featuring OEM-style direct-fit factory connectors, ensuring a seamless and reliable installation.
✅ Key Benefits:
- Premium 6-Ply Silicone Construction – Handles up to 200 PSI for superior durability.
- BILLET OR OEM-Style Factory Connectors – Direct fit with no modifications required.
- Multiple Color Options – Available in Red, Black, or Blue to match your engine bay aesthetic.
- All Hoses In Stock – Choose your preferred fitting style and color at checkout.
-
VTT "Spline Lock" Crank Hub System – N54 / N55 / S55
VTT is proud to offer the only complete crank hub solution for BMW N54, N55, and S55 engines that does not require drilling the crankshaft for pins.
Our innovative hub features proprietary Spline Lock Technology—a high-tolerance, precision-machined spline system that presses into the crank and positively locks the hub in place, eliminating the need for traditional pinning or welding.
After months of rigorous development and over 10 different prototype revisions, our final production version was put to the test. In our in-house trials, the hub outperformed expectations—breaking our testing rig before it ever slipped. Real-world validation has been conducted on the VTT N54 race car, which spins to 8,000 RPM and produces over 900 WHP.
Key Benefits:
-
No crank drilling required – stock-like installation
-
Minimal labor – fully reversible with no permanent modification
-
Tested to extreme conditions – race-proven at high RPM and power
-
Exclusively compatible with VTT’s Crank Bolt Capture (CBC) for maximum security
⚠️ Spline Lock hubs are recommended be used with the VTT Crank Bolt Capture system. They are not intended to run independently.
-
-
VTT BILLET BMW N54/55 Crank Seal Guard.
It is a well-known issue on the BMW N54/N55/S55 platforms that your serpentine belt can fail for various reasons, when this happens you have a high chance of the belt getting sucked behind the front damper, and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure, even if you do not lose the engine it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT Even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. -
Upgraded PCV valve for your N54 engine. We always recommend upgrading your PCV valve at the time of turbo upgrade or replacement, as the stock valve can be worn. This means it can stop functioning to its full potential, causing oiling issues with your BMW. This upgraded valve not only replaces the worn stock valve, it is also much stronger and will help eliminate any future PCV issues.
Kit Includes:
-
1x Billet PCV Valve Or 1x Billet PCV cover
- 1x complete kit with PCV Valve, and PCV cover (Save 15%)
-
-
VTT CNC Billet check valve that can be used for a variety of uses including a vacuum/boost check valve when removing the stock PCV system, and still wanting to run vacuum to the crankcase. Rated at over 100 psi, with a cracking psi of .25psi.
-
Looking to get the most efficient turbocharger operation out of your N54-powered BMW? The best way to do this is to remove all restrictions from the inlet and charge the tract. The factory charge pipe has a very small 1" opening and a poorly designed Y section that couples the two banks into one before entering the intercooler. This VTT N54 Aluminum outlet gets rid of those restrictions and provides a full 1.5" from the turbochargers to a smooth Y transition into a 2.5" outlet to fit most aftermarket intercoolers. Do not be fooled by companies trying to sell you oversized 2" charge pipes, these are not going to pick up any power, and will kill velocity. The smallest diameter you can run while still providing adequate flow is always best for flow velocity and reducing time to TQ.
-
Are you building a single kit for the N54, N55, or S55 platform? The stock studs are usually a little bit short for most single-head flanges, and finding M7 studs is not easy. So we made our own longer studs to combat the issue. Made from 10.9 grade steel, and coated in black oxide, these are the perfect solution to the short stud problem. Sold individually so order the number you need. Stud details are as follows
- Overall length 47mm (stock 39mm)
- 3mm shoulder
- 6mm head which is 5mm hex
- 14mm short end
- 24mm long end (stock 15mm)
Dont forget our M7 copper lock nuts as well to complete the job - https://vargasturbo.com/product/vtt-fab-m7-copper-locking-exhaust-nuts/
-
Are you building a single kit for the N54, N55, or S55 platform? M7 Locking exhaust nuts is not easy. So we made our own to combat the issue. These are the perfect solution to the problem of hard-to-find M7 lock nuts. Sold individually so order the number you need.
Note: This is nuts ONLY Stud not included, by our extended M7 studs here - https://vargasturbo.com/product/vtt-fab-extended-m7-n54-n55-s55-b58-2-port-head-studs/
-
VTT Billet CNC Oil Caps
Upgrade your BMW engine bay with a touch of precision and durability. VTT Billet CNC Oil Caps replace the factory plastic cap with a high-quality, performance-focused alternative.
-
Premium Materials – Machined from 6061-T6 aircraft-grade aluminum with stainless steel locking tabs for a secure fit and long-lasting reliability.
-
Anodized Finishes – Available in red, black, blue, purple, gold, or clear anodizing to match your build’s style.
-
Perfect Fitment – Designed for all BMW engines with a two-prong locking tab oil cap design, including (but not limited to):
THIS CAP DOES NOT FIT, B58TU, S58, A90/91 SUPRA, THIS ONLY FITS 2 PRONG CAP STYLE
-
-
VTT High-Performance Ignition Coils
BMW N5X • B58 / S58 / B48 • VAG Platforms
Vargas Turbo Technologies (VTT) is proud to offer high-performance ignition coil upgrades for BMW N5X platforms, B58/S58/B48 engines, and select VAG applications.
Development & Testing
Our ignition coil program began with extensive outreach to multiple OEM and aftermarket coil manufacturers. We commissioned individual prototype coils, then subjected them to rigorous, repeatable testing in the United States to ensure they matched or exceeded factory performance standards.
Only the highest-performing designs were selected and produced to VTT’s exact specifications and colorways. These are not rebranded or cosmetic coils—each set is performance-validated.
-
VTT CNC Oil Block off the plate. Use these when you want to delete the stock coolers lines, and run two -10 fittings for your aftermarket oil cooler set up. These provide full flow and get rid of any restrictions. We offer these in THREE colors to match out other N54 billet engine parts such as Oil Cap, PS cap, and Oil Filter housing cap. Available as plate only, with -10 fittings, or -8 fittings
We suggest running an aftermarket thermostat with a block-off plate to help warm the car up quickly.
-
Buy all 5 Fittings and Save $6. This product includes all of the fittings listed below.
-
This kit comes with 1 set (both turbos) of Stainless Steel wear matched bushing, and flapper assembly, Wastegate arm, rod end, and Stainless steel 8mm C clip.
-
VTT B58 Gen-1/TU Billet One-Way Crankcase Breather
VTT is proud to introduce the first and only plug-and-play ONE-WAY crankcase breather kit for BMW B58 applications! (For Supra applications, please check our Supra section.)
This breather is a simple yet effective upgrade—just remove your oil cap, install the breather, and instantly free up horsepower. It improves turbo draining, eliminates crankcase pressure, and enhances your engine bay's aesthetics. Fits with the engine cover on, and you can remove/install the cover without taking off the breather.
Key Features & Benefits:
✅ Easy Installation – Plug-and-play design; installs in minutes
✅ Reduces Crankcase Pressure – Improves turbo performance & engine efficiency
✅ Compatible with Stock or Aftermarket PCV Systems – Can be used alone or paired with the VTT Engine Catch Can for maximum crankcase pressure relief
✅ High-Quality Construction –- 6061-T6 Aircraft-Grade Aluminum with a durable black anodized finish
- Four Stainless Steel Baffles for superior oil control
- PTFE One-Way Check Ball to ensure proper ventilation
- Premium Filter & Clamp to maintain performance and longevity
Maintenance Advisory
- This is a service item—it captures oil from spent gases, so it must be cleaned periodically.
- Vehicles with high crankcase pressure may require more frequent cleaning to prevent oil mist from escaping.
-
VTT Ultimate Modular Valve Cover & PCV System
VTT is proud to introduce a ground-up system that gives the end user complete control over their valve cover and PCV setup. Tired of being told you must run two -10AN lines from your valve cover to your catch can? So were we. This system allows you to configure it exactly how you want—run it fully VTA, use an oil cap one-way breather, or create your own hybrid setup. Nothing else on the market matches the versatility and functionality of this modular system.
It’s the ULTIMATE Valve Cover & PCV Combo—or choose just the components you need. Run as many or as few connections as you like.
Kit Overview:
-
WHP Level supported (with proper fuel, upgrades, and tuning) Stock - 500WHP
-
VTT Head Port Block-Off Kit
The VTT Head Port Block-Off Kit is designed to seal the built-in ports in the cylinder head that utilize engine vacuum to clear the low-side PCV system. This factory setup can draw oil into the intake manifold, leading to valve carbon buildup and other unwanted issues.
Kit Includes:
-
6 precision-fit set screws
-
Engine-specific tap
This kit is compatible with N54 engines. Each kit is supplied with the correct tap for your specific engine type.
-
-
A well-known issue on the N54 and early N55 engines with hydraulic power steering is the factory plastic pulley. These pulleys are notorious for either contacting the subframe or simply failing on their own. When that happens, the serpentine belt can be thrown off, leaving you stranded. Worse yet, if the engine is run with the belt off, there’s a high chance of the belt being sucked into the motor through the front crank seal — a failure that can lead to catastrophic engine damage.
Put an end to these problems with the VTT 100% Billet Aluminum Power Steering Pulley.
Key Features
-
Direct OEM Replacement – Solves the weak plastic pulley issue permanently.
-
Durable Construction – CNC-machined from 6061-T6 aluminum for strength and reliability.
-
Anodized Finish – Available in Black, Red, Blue, or Clear for long-lasting protection and engine bay style.
-
Optimized Weight – Weighs just 11oz, nearly identical to the stock pulley and lighter than cast aluminum alternatives on the market.
-
Peace of Mind – Prevents belt ejection and eliminates the risk of belt ingestion through the crank seal.
-
-
NGK 94201 Spark Plug Set — compatible with all S58 / B58 / B48 applications, and also ideal for N54 / N55 platforms running the B58 coil upgrade.
We recommend these plugs for vehicles running 100% E85, high boost, or upgraded ignition setups. They are an excellent choice for high-performance BMW applications including N54, N55, and S55 (with B58 coils), and they also serve as a great maintenance replacement for any S58/B58/B48-powered vehicle — at a significantly better price than most options on the market.
Plugs are sold as a set of 6.
Pre-gapping is available for an additional charge -
VTT "Spline Lock" Crank Hub System – N54 / N55 / S55
VTT is proud to offer the only complete crank hub solution for BMW N54, N55, and S55 engines that does not require drilling the crankshaft for pins.
Our innovative hub features proprietary Spline Lock Technology—a high-tolerance, precision-machined spline system that presses into the crank and positively locks the hub in place, eliminating the need for traditional pinning or welding.
After months of rigorous development and over 10 different prototype revisions, our final production version was put to the test. In our in-house trials, the hub outperformed expectations—breaking our testing rig before it ever slipped. Real-world validation has been conducted on the VTT N54 race car, which spins to 8,000 RPM and produces over 900 WHP.
Key Benefits:
-
No crank drilling required – stock-like installation
-
Minimal labor – fully reversible with no permanent modification
-
Tested to extreme conditions – race-proven at high RPM and power
-
Exclusively compatible with VTT’s Crank Bolt Capture (CBC) for maximum security
⚠️ Spline Lock hubs are recommended be used with the VTT Crank Bolt Capture system. They are not intended to run independently.
-
-
Looking to convert your 5×120 or 5x112 vehicle to 5x114.3 wheels, or 5x120 wheels, and open up your wheel options DRAMATICALLY? We got covered with our VTT wheel spacer conversion kits. These kits are machined from billet 6061-T6 aluminum and anodized for a long-lasting finish. We then press in 10.9 class studs, with corrosion-resistant zinc coating for years of use. The spacer then accepts either a 5x114 wheel or a 5x120 wheel. The 5x114 use M14 studs, and the 5x120 use M12 studs. All the spacers have either a 66.6mm or 72.6mm Hub bore size to fit 99% of BMW applications.
QTY 1 is for ONE SPACER. If you need to do 4 wheels order FOUR!
We offer Hub-Centric adapter rings to fit other wheel bore sizes No wobble bolts or redrilling here. We offer these in 4 thicknesses 15mm, 17.5mm, 20mm, and 25mm. The studs coming out of the spacer are 40″ total length and come with Black Lugnuts. Spacers that convert to 5x120 have M12 studs, ALL others have M14x1.5 -
Made from CNC 6061-T6 Aircraft aluminum anodized black for a long-lasting finish.
-
VTT Billet Wheel Spacers
VTT is proud to offer billet wheel spacers for most VAG, BMW, and the A90/91 Toyota Supra platforms.
Each spacer is:
-
CNC-machined from 6061-T6 aluminum
-
Hard anodized black for a long, corrosion-free life
We offer multiple fitments and sizes to suit a wide range of applications.
THESE ARE SOLD INDIVIDUALLY, FOR ONE AXLE ORDER TWO FOR A COMPLETE SET ORDER FOUR.
ANYTHING OVER 5MM WILL REQUIRE LONGER BOLTS OR STUDS. YOU CAN CHOOSE TO ADD A VTT WHEEL STUD KIT FROM THE OPTIONS.
PLEASE DOUBLE CHECK YOUR BOLT PATTERN AND HUB BORE BEFORE YOU ORDER. INSTALLED SPACERS CANNOT BE RETURNED!
-
-
VTT N54 → B58 Ignition Coil Conversion Kit
BMW N54 Platform
Vargas Turbo Technologies is proud to introduce our game-changing N54 to B58 ignition coil conversion kit for the BMW N54 platform.
The N54 engine has long been known for ignition-related issues with factory coils. While several aftermarket solutions exist, many are bulky, visually unappealing, or unnecessarily complex. Even factory-style upgrades such as S55 coils—or upgraded N54 coils—while effective, still fall short of what the BMW B58 ignition system can deliver.
The BMW B58 ignition coil is exceptionally robust, capable of reliably supporting well over 1,000 WHP with no issues. This makes it the ideal solution for high-performance N54 applications. Our kit delivers that performance in a true plug-and-play, affordable package that installs like stock—and looks incredible doing it.
-
Need to replace the gasket on your VTT Aluminum VC? Simply choose your model from the dropdowns to ensure you get the correct version.
-
Whenever upgrading your N54 we suggest going to a true BOV like a Turbosmart Raceport. This cold side charge pipe allows you to do that while getting rid of the prone to cracking plastic charge pipe, and plastic DV's. If you do want to keep the DV set up, we also offer a DV charge pipe. Also available for N55 with no bungs at all, as the DV is on the turbo. Looking for the Charge Pipe & BOV Combo? Click Here
-
VTT Cast Aluminum Valve Cover – N54
Upgrade your BMW N54 with VTT’s Cast Aluminum Valve Cover—a durable, high-performance alternative to the factory plastic cover. This version offers the same precision machining as our billet model, but at a lower cost, making it the best bang-for-your-buck valve cover upgrade.
By eliminating the factory PCV system, this valve cover allows full customization of your PCV setup. It is also fully modular, meaning it seamlessly integrates with all VTT PCV fittings, breather options, and accessories.
Built from aircraft-grade aluminum, powder-coated in three bold colors, and fully baffled to prevent unwanted oil escape, this cover is a must-have for N54 owners seeking longevity, reliability, and performance.
Key Features & Benefits:
✅ Cast CNC 6061-T6 Aircraft-Grade Aluminum Construction – Built for strength and durability
✅ Powder-Coated in Multiple Colors – Choose from Black Wrinkle, Blue Wrinkle, or Red Wrinkle for a flawless finish
✅ Lightweight Design – Weighs 9.0 lbs (compared to 7.9 lbs for the stock cover—just a 1.1 lb difference)
✅ Fully Modular PCV System – Compatible with all VTT PCV fittings, breathers, and accessories
✅ Cost-Effective Alternative – More affordable than other non-modular cast options
✅ Fully Baffled Ports – Prevents unwanted oil escape
✅ Direct Fit for BMW N54 Engines – Includes a new factory gasket and all required installation hardware -
NGK 95706 Spark plug set required for running 100% e85, and high boost on many BMW applications, including N54, N55, S55, etc. Plugs can be bought as a set of 6. You can add pre-gapping for an additional charge
-
Need a replacement filter for your VTT Billet Crankcase breather? You can order on here. We offer them in 3 heights, low 48mm, medium58mm, and tall 68mm. This is measured from base to top. The filter will include a new clamp. For reference: N54/55 mostly use the low A90 Supra use Medium Most Audi applications can fit a tall, but measure your filter before ordering.
-
Please note: Due to heavy increases in freight costs we have had to raise prices by $50 on 54-gallon drums, and $15 on pails.
VTT is proud to be the West Coast dealer for One Ethanol racing fuel.
We have two blends available in 5-gallon pails and 54-gallon drums. See below for descriptions of both fuels
Fuel is available for local pick up only unless you email, and make arrangements for freight shipping. Be aware fuel is considered hazmat and the freight charges are equal to or more than the fuel in all instances. Fuel CANNOT be shipped normal shipping methods such as UPS, FED EX, etc
-
Do you work on BMW engines across multiple platforms? Tired of modifying universal engine stand plates just to make them fit? Frustrated by losing access to the flywheel side once the engine is mounted?
We were too—so we built the solution.
The VTT BMW Engine Stand Plate is a true bolt-on design that keeps the flywheel end fully accessible while providing a strong, stable mounting solution for your engine builds.
Machined from solid 6061-T6 billet aluminum and anodized in five colors for long-term durability and corrosion resistance, these plates are lightweight yet rated for over 1200 lbs.
Fitment: N54, N55, S55, B58, S58 (more coming soon)
Note: The stand tube is 60mm or 2.36” OD, which fits most engine stands, but not all—please measure before purchasing.
Key Features:
- Lightweight, high-strength billet 6061-T6 construction
- Durable anodized finish
- Direct bolt-on to intake-side motor mount location
- Full clearance for accessories and flywheel/flex plate access
- Built-in provisions for locator pin and rotation bar
-
Looking to fix the diff bolt issue on your F9X X3/4M? VTT has taken a 3 pronged approach by offering a triple solution, one part of the solution is the Rear diff bushing insert kit. This is pressed into the factory bushing and fills the voids in the bushing. This keeps the stock bushing ride compliance but removes any unwanted movement. These are sold as a kit and are available in rear side only, and front and rear sides both. Adding in the front side increases installation time, and difficulty as the diff will need to be dropped, and a tool will need to be used to press in the front side bushing Kit includes:
- One Billet Bushing insert
- Two 46mm Hardened Steel Washers
- One 12.9 M14 Bolt
- One M14 Lock nut
- Optional front side bushing which will fully lock down the bushing. (requires the diff to be lowered, and the bushing pressed into the front)
All products that are designed to stiffen or reduce drivetrain movement inherently have the tendency to increase NVH or Noise, Harness, or vibration. While these bushings inserts have been found to add little NVH in most instances. Your results and sensitivity to NVH may vary. This product is designed to reduce drivetrain movement, and that was the goal when designing and manufacturing this product. Returns for NVH are not accepted once products are installed.
-
Stop the Flex. Launch with Confidence.
Soft bushings are the enemy of hard launches and drivetrain longevity. The factory BMW transfer case bushings—especially on the G8X and F9X platforms—are notoriously soft. That’s the last thing you want when you’re putting serious power down.
Sure, you could replace the entire bushing with a solid one, but that often requires lowering or removing the transfer case—not to mention the added NVH (noise, vibration, and harshness) that comes with it.
Our transfer case bushing inserts offer a smarter solution: reduce bushing flex without sacrificing comfort. You keep smooth, quiet drivability around town and at idle—but when it’s time to launch, the transfer case stays planted.
Fitment Notice – Two Versions Available:
BMW uses two different transfer case bushing types. We now offer Version A and Version B inserts to match.
⚠️ You must physically inspect your vehicle’s bushing to determine which version you need.
We are not responsible for incorrect orders if this step is skipped. -
VTT offers silicone hoses in various Push-lock sizes, we use these for our catch can kits, but they are also suitable for coolant, vacuum, boost, etc. Do not use with fuel. We offer: -10 Push Lock 24", and 18" -8 Push Lock 24", and 19.5" -6 Push Lock 24"
-
VTT silicone inlets are the premier choice for your N54 inlet needs. Made from high-quality, wire-impregnated silicone, these inlets are a full 6mm thick and can withstand even the harshest underhood conditions.
-
VTT Billet Oil Filter Housing Cap – BMW N5X / S55 / N20
VTT is proud to introduce our billet aluminum replacement for the factory plastic oil filter housing cap. Built for both performance and style, this upgrade eliminates the weak OEM plastic cap while also removing the need for a special tool during filter changes.
-
Premium Construction – CNC-machined from 6061-T6 aluminum with precision cooling fins to help reduce oil temps.
-
Factory Functionality – Retains all OEM provisions for the filter basket, including the lower pins essential for proper bypass valve function.
-
Easy Serviceability – Features a 19mm hex head for quick installation and removal with standard tools.
-
Complete Package – Includes a new sealing O-ring and small O-ring for the filter cage.
-
Color Options – Available in Red, Black, Blue, and Clear anodizing.
-
Cohesive Design – Matches perfectly with our N5X Billet Oil Cap and N5X Billet Power Steering Cap for a clean, uniform look under the hood.
-
Bundle Option – Get all three caps (Oil Cap, Oil Filter Housing Cap, and Power Steering Cap) for $175 – a 10% savings.
-
-
VTT is proud to offer a Titanium hardware upgrade for all our Billet and Cast VC's. This will come with M6x30 Ti bolts N54 /N55/S55/B58 Gen 1/ B58 TU it will be an Umbrella head with a 16.3mm head. These bolts weigh half as much as comparable steel hardware and look amazing. Colors to choose from will be Burnt, Black, and Natural (silver)
-
VTT Billet Coolant Reservoir Cap – BMW
Upgrade your engine bay and eliminate the factory plastic with the VTT Billet Coolant Reservoir Cap. This CNC-machined aluminum cap replaces the OEM plastic unit, giving you strength, style, and long-term durability while retaining all OEM functionality. Simply snap the factory pressure-relief valve into place, and you’re ready to go.
-
Premium Construction – CNC-machined from 6061-T6 aluminum.
-
Factory Functionality – Accepts the OEM pressure-relief insert for proper venting.
-
Cohesive Design – Matches our N5X Billet Oil Cap, N5X Billet Oil Filter Housing Cap, and Billet Power Steering Cap for a uniform, high-end look.
-
Color Options – Available in Red, Black, Blue, and Clear anodizing.
-
-
VTT Billet B58 Gen PCV Cap replacement. Get rid of your fragile Stock PCV Cap/Diaphragm
-
VTT is proud to offer Titanium wheel stud kits for the owner looking for the lowest possible unsprung weight while maintaining high strength, and good looks as all come with an amazing burnt finish. This kit is 60% lighter than factory steel studs and nuts with a total kit of 20 nuts, and studs being 3.1LBS. Sets of 10 are 1.55 lbs
-
VTT N54 Complete External PCV & Valve Cover Catch Can Kit
Take the guesswork out of your N54 valve cover and catch can setup! One of the most common questions we get at VTT is how to properly configure a valve cover + catch can + external PCV system. Which fittings? What routing? What works best? We’ve simplified the process by offering a complete kit—built from the experience of installing hundreds of systems. No more confusion—just let us know a few preferences, and we’ll handle the rest.
What We Need From You:
- Valve Cover Type: Billet or Cast
- Color:
- Cast Options: Black Wrinkle or Red Wrinkle
- Billet Options: Black, Clear, Red, Blue, or Custom
- Fitting Style:
- Steel Fittings – Cost-effective, clean look
- VTT Low-Profile Banjo Fittings – Sleek and compact, premium option
-
The VTT N54 crank bolt capture. slips over the head of the crank bolt fully encapsulating it, and locks it to the crank hub, meaning it cannot back out no matter what.
-
VTT Billet Power Steering Cap – BMW
VTT is proud to introduce our billet aluminum replacement for the factory plastic BMW power steering cap. Designed to eliminate the weak OEM plastic cap, this upgrade delivers both durability and style while retaining all OEM functionality, including the built-in dipstick and vent provision.
-
Premium Construction – CNC-machined from 6061-T6 aluminum, anodized in your choice of finish.
-
Factory Functionality – Full dipstick and vent hole integration, just like OEM.
-
Cohesive Design – Matches perfectly with our N5X Billet Oil Cap and N5X Billet Oil Filter Housing Cap for a complete, uniform look.
-
Bundle Option – Order all three (Oil Cap, Oil Filter Housing Cap, and Power Steering Cap) for $175.
-
Color Options – Red, Black, Blue, and Clear anodizing.
-
-
Need N54 turbo replacements, don't have full turbo replacements in your budget, like wrenching on your own stuff? If you answered yes to any of those questions, the VTT N54 CHRA replacements are perfect for you!
-
WHP Level supported (with proper fuel, upgrades, and tuning) Stock-800WHP VTT S55 GC Turbochargers. GC stands for "Game Changers" and that is exactly what these do! They bring a fully new casting Stainless Steel turbine manifold/housing, all new compressor housing with single piece high flow inlet, as well as our tried, and true V2 GC CHRA with a Mar-M246 GTX28 profile turbine wheel, and custom compressor wheel. These turbos have NO core charges, keep your stock turbos, sell them, hold them if you want to go back to stock, etc. The turbos will come with custom VTT silicone inlet hoses to mate up with all inlets on the market making them 100% plug, and play. There is no better, more powerful, or well thought out upgrade on the market at any price point!
-
VTT is proud to announce our F/G Series B58 engine catch can set up. This kit uses our already extremely popular modular catch can, and couples it with a custom CNC 6061 bracket, VTT CNC banjo fittings, VTT 5 ply silicone hose, and Push lock fittings. Install is simple, takes about 30 minutes to 2 hours depending on your skill level, and requires removing one factory hose to install the VTT hoses. Giving an OEM fit and finished when installed. Our kit stands out from others on the market by using high-quality AN fittings, and VTT Banjo adapters. G series fits all 2019+ G Series 3/4 BMW vehicles with the B58TU engine, F Series fits all 2015+ F3X series BMW vehicles with the B58 engine. May NOT fit all F series as some 2 series chassis may be different.
-
VTT Billet Vacuum Canisters
VTT is proud to offer our billet replacement for the factory plastic vacuum tanks that store vacuum from the pump and regulate boost via the solenoids.
The OEM plastic cans – and their small plastic nipples – are known to crack over time. When they fail, you’ll experience low boost, no boost, or inconsistent performance. Our billet cans eliminate this weak link while adding strength, durability, and a pop of color to your engine bay.
Key Features
-
Direct Replacement: Retains all factory provisions, including mounting points.
-
Upgraded Fittings: Includes billet 90-degree barbed fittings for cleaner, easier vacuum line routing.
-
Premium Construction: CNC-machined from 6061-T6 aluminum, anodized for beauty and long service life.
-
Distinct Look: Knurled finish adds a high-end, motorsport-inspired aesthetic.
-
Matching Lineup: Designed to complement the full VTT N54 billet accessory line – oil caps, oil filter housing caps, coolant cap, valve cover, oil cooler block-off plate, power steering cap, and more.
-
-
Looking to fix the diff bolt issue on your F9X X3/4M? VTT has taken a 3 pronged approach by offering a triple solution, one part of the solution is the front diff bushing inserts. These are pressed into the factory bushing, and fill the voids in the bushing. This keeps the stock bushing ride compliance but removes any unwanted movement. These are sold as a set Kit includes:
- Two Billet Bushing inserts
- Two 46mm Hardened Steel Washers
All products that are designed to stiffen or reduce drivetrain movement inherently have the tendency to increase NVH or Noise, Harness, or vibration. While these bushings inserts have been found to add little NVH in most instances. Your results and sensitivity to NVH may vary. This product is designed to reduce drivetrain movement, and that was the goal when designing and manufacturing this product. Returns for NVH are not accepted once products are installed.
-
Everything needed to a successful install without having to make a trip to the dealer.
-
A plug and play BOV option for your N54. This kit comes with everything you will need to replace your undersized factory DV with a high quality Turbosmart Race port.
-
Made of 6061-T6 aircraft aluminum anodized black, comes with O-ring, and stainless steel holding clip
-
We are happy to release our BMW B54/N55 (Limited N55 Fitment) vacuum/boost adapter. These go inline with the Throttle Body fitting and provide a full boost/vacuum signal from the manifold. This fitting adds two 1/8NPT bungs to accept any fitting that has 1/8" NPT threads. You can choose options, 1/4" barb, as well as 1/8NPT plugs if you only want one barb, etc. These are perfect for running your PI off manifold pressure which is much more accurate than charge pipe, and they are also great for BOV running the proper size line without having to drill a hole in your manifold. These do space out any sensors etc giving inaccurate readings like some of the other brands do. They are made from 6061-T6 anodized black, with steel plugs, and Blue Anodized barbed fittings. You can choose to order in a few ways. You can choose straight or 90-degree barbs. Adapter alone Basic kit - 1 Adapter, 1 barb, and one plug, one vacuum cap, and one zip tie Dual Barb kit - 1 Adapter, 2 barbs, one vacuum cap, and one zip tie
-
VTT noticed a hole in the F9X X3/4M market for a high-quality, lightweight, NVH-friendly, and easy-to-install Diff Lock Down kit to improve diff stability under launching, and hard cornering. So we did something about it and went to work on a very innovative design that 100% positively locks the diff down from movement, while shielding it from adding a ton of NVH, and can be used with the stock diff, and subframe bushings. This design uses existing mounting points on the vehicle, you do NOT have to remove the subframe or the Diff to install. Simply remove 4 diff bolts, drill two holes in the subframe slightly bigger, install two M8 riv-nuts, and install the lockdown, you do not even have to move the exhaust. A typical install can be 30-45 minutes for someone who is experienced working on vehicles, an hour or two if you like taking it slow. You WILL need a Riv-nut tool to install the Riv-nuts, we provide a link below for what we recommend on Amazon. Features:
- Lightweight 1.5 lbs for the entire lockdown plate
- Uses FOUR connection points on the Diff, and three on the subframe for the ultimate in positive diff location, this will stop all diff movement on launch, saving your guibos, etc
- 100% Billet construction from 6061-T6 aluminum
- Anodized in 3 colors for corrosion resistance, a long-lasting finish, and good looks
- The subframe does NOT have to be removed for installation
- Uses all 10.9 and 12.9 grade hardware
- Does not add excessive NVH
- Positively locks down the diff to eliminate all unwanted movement under launches, acceleration, cornering, etc.
All products that are designed to stiffen or reduce drivetrain movement inherently have the tendency to increase NVH or Noise, Harness, or vibration. While these bushings inserts have been found to add little NVH in most instances. Your results and sensitivity to NVH may vary. This product is designed to reduce drivetrain movement, and that was the goal when designing and manufacturing this product. Returns for NVH are not accepted once products are installed.
-
Sale!Looking for a Lightweight, AFFORDABLE drag pack that looks amazing for your BMW, Toyota, or VAG platform? Look no further! VTT is proud to announce our lineup of Drag pack wheels for various BMW/Toyota/VAG fitments! We teamed up with Rota and had them open custom molds for us of their extremely popular Grid design. With these molds, we have an exclusive on 15X10, 17X10, and 17X4.5 wheels in our exact specs. The wheels are currently offered in the colors and sizes below
A variety of Offsets are available, as well as spacers here - VTT Spacers can be found here - https://vargasturbo.com/product/vtt-billet-wheel-spacers/
As well as Center bore adapters here - https://vargasturbo.com/product/vtt-billet-hubcentric-wheel-bore-adapters/Wheels are priced EACH, meaning per wheel
PLEASE NOTE! CHECK FITMENT CAREFULLY. ANY WHEELS THAT HAVE HAD TIRES MOUNTED OR ARE DAMAGED DURING TEST FITTING ETC ARE NOT RETURNABLE!
We make NO CLAIM these fit ANY PLATFORM, or ANY factory brake set up. It is YOUR JOB to measure, and make sure they will fit BEFORE you mount tires or install them. WE NEVER suggest shaving down brake calipers to fit a smaller wheel. If they do not fit. GET A SMALL BRAKE KIT!
Colors offered:- Satin Black
- Gloss Black
- Bronze,
- Gun Metallic
- 15x10 ET45/ET40 (wheel weight 16 lbs)
- 17x10 ET45/ET40/ET25 (wheel weight 19lbs)
- 17x4.5 ET-20 (wheel weight 16 lbs)
- 15x10 ET45 - (wheel weight 16 lbs)
- 17x10 ET45/ET40/ET25 (wheel weight 19 lbs)
- 17x4.5 ET-20 (wheel weight 16 lbs)
-
Sale!Save 15% on your VTT Silicone inlets, and aluminum outlets if you order them together!
-
VTT G Series S58 Billet One Way Crankcase Breather
VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW G series S58 applications With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather.This is a SERVICE item, it is designed to capture and hold oil that is pulled from the spent gasses when it gets saturated, it must be cleaned
-
WHP Level supported (with proper fuel, upgrades, and tuning) Stock - 625WHP
-
Looking for a little extra clearance on your coolant tank fitting due to relocation for single turbo, forward-facing intake manifold, etc. This 90-degree fitting will allow you to run the hose straight down instead of straight out, and increase your clearance, and routing choices. Made of 6061-T6 and anodized black for a long-lasting finish. Comes with fitting, and 1 clamp.
-
WHP Level supported (with proper fuel, upgrades, and tuning) Stock – 425WHP
While we feel this should go without saying—since none of the photos show a turbine housing—just to be absolutely clear:
This product includes the CHRA and compressor housing only.
It is designed to be used with your existing stock turbine housing.Frequently Asked Questions What is included in the N55 Turbo Upgrade Kit?
The N55 Turbo Upgrade Kit includes high-performance components designed to enhance your engine’s power and efficiency. It typically features upgraded turbochargers, supporting hardware, and installation instructions for a seamless upgrade.Will the N55 Turbo Upgrade improve my car’s performance?
Yes, this upgrade is engineered to increase horsepower, torque, and overall responsiveness. It optimizes airflow and boost pressure, providing a noticeable improvement in acceleration and engine efficiency.Is the N55 Turbo Upgrade compatible with my vehicle?
The kit is designed specifically for BMW models equipped with the N55 engine. Please check your vehicle’s year and model compatibility before purchasing to ensure a proper fit.Can I install the N55 Turbo Upgrade myself, or do I need a professional?
While some experienced enthusiasts may install the kit themselves, professional installation is recommended to ensure proper tuning, optimal performance, and warranty compliance.
-
Looking to go above 45 psi in your BMW-powered vehicle? Looking for a plug-and-play solution? We have you covered with our BMW 5 bar sensor. These will allow 58 psi to be read and are factory plug-and-play. Simply remove your old sensor, replace it with the 5 bar, and have your tuner rescale your map values in both your DME tune and your PI tune if applicable.
These are GENUINE BMW sensors directly from BMW.
PLEASE NOTE: These are GENUINE BMW sensors directly from THE BMW DEALERSHIP, BMW IS PUTTING A BMW STICKER OVER A DENSO BOX, AND SELLING THEM. THESE DO NOT HAVE BMW STAMPS ON THEM. WE HAVE ZERO CONTROL OVER THIS.
-
Have a problematic PCV on your S55/N55 powered BMW, don't want to pay to replace the entire VC? The VTT PCV delete kit is just what you need. This kit blocks the factory PCV from pulling from the head ports, gets rid of the tear-prone rubber diaphragm, and essentially converts your VC into VTA through the factory front port on the VC. This kit can work stand-alone with the cap, and a -10 ORB plug, can be used to run an extra breather port, or it can be installed with any Catch Can kit that uses the front port of the stock VC. Simply remove the factory cap, take out the diaphragm, screw the plug into the center port, and tap the new cap on with a soft blow hammer or similar. This deletes the PCV and allows you to avoid the issues of a failed diaphragm. Kit Choices
- Cap and -10ORB plug only (to be used with an existing catch can or VTA)
- Cap and Catch can kit (recirc or VTA) Complete kit to delete the PCV, and run a catch can (Currently works with S55 only)
- Cap Only (To be used if routing an additional hose from the cap to location or set up of choice, requires your parts to work)
- 1 PCV Cap
- 1 PCV port block off Plug
- 1 -10 ORB Plug
- Optional Catch Can kit
-
Adapter fitting that is required to convert your N54 to external PCV if you want to keep your crankcase under vacuum at idle, and anytime you have a vacuum condition in your intake manifold.
-
The stock outlet adapter on the N54/55 is NOTORIOUS for cracking when removing. This Billet replacement ensures no leaks, and no more cracked adapters. Available in 6 colors! Black, Red, Clear, Blue, Purple, Gold
-
VTT B58 “GC / GC-MID / GC+” Turbocharger Upgrades
Wheel Sizing / Power Support
Model Wheel Size (Comp/Turb) Stock Engine Power Range GC 54/55 Up to 600WHP GC-MID (TU ONLY) 54/60 Up to 650WHP GC+ 67/68 Up to 800WHP
Ready to take your B58 platform to the next level—without core charges, long waits, or compromising spool? VTT has you covered. Our 100% new casting B58 GC-Series turbochargers (GC, GC-MID, and GC+) retain the OE packaging advantages while removing the factory airflow limitations and weak internal architecture.
We start by keeping what BMW did right, then eliminate every bottleneck we found: the restrictive factory inlet, inefficient bearing housing oiling, small thrust assembly, and anything else holding the B58 back. Then we incorporate proprietary VTT improvements and cast everything at full OE-level quality.
The result? Serious B58 power made simple. GC turbos are direct bolt-on upgrades that retain all factory connections (oil, water, charge pipe, downpipe) while supporting 600WHP+ — with factory-like spool.
NOTE: The GC is Super Core ONLY, meaning no exhaust housing; this turbo plugs directly into your factory exhaust housing.
-
WHP Level supported (with proper fuel, upgrades, and tuning) Stock - 525WHP
-
We are happy to release our BMWB58 (Fits ALL B58 models including TU found in the A90/A91 Toyota Supra) vacuum/boost adapter. These go inline with the intake manifold fitting and provide a full boost/vacuum signal from the manifold. This fitting adds two 1/8NPT bungs to accept any fitting that has 1/8" NPT threads. You can choose options, Fitting by itself, 1/4" barb, as well as 1/8NPT plugs if you only want one barb, etc. You can choose straight or 90-degree barbs. Once installed it tucks perfectly under your engine cover. These are perfect for running your PI switch off manifold pressure which is much more accurate than charge pipe, and they are also great for BOV running the proper size line without having to drill a hole in your manifold. These do space out any sensors etc giving inaccurate readings like some of the other brands do. They are made from 6061-T6 anodized black, with steel plugs, and Blue Anodized barbed fittings. You can choose to order in a few ways. Adapter alone - $40 Basic kit - 1 Adapter, 1 barb, and one plug $45.00 Dual Barb kit - 1 Adapter, 2 barbs, $55.00
-
This is for those running our brake kits that use our 11.75" or 13" Rotors that want to easily change between rotors for dedicated drag racing and street use. You can now buy Rotor/Hat Assemblies by themselves to switch between any of our 3 options
The price is for ONE ROTOR / OR ONE ROTOR/HAT ASSEMBLY
-
VTT is proud to offer the only Vanos covers on the market made from 7075 aluminum instead of the much more common 6061. We went with 7075 due to its increased tensile strength and fatigue strength. Each cover is CNC machined from a 7075 billet, anodized in black for corrosion resistance. These covers snap on and replace the factory plastic covers which are prone to failure over time. We ensure a perfect fit on our covers by going through more than 6 different sample designs to land on our final version. These covers have a very tight fit to avoid vibration or chaffing of the engagement dogs. These are the last vanos covers you will ever have to buy. Simply line them up, and snap them on, with no worries of retiming the engine, etc. Features:
- Machined from high-strength 7075 Aluminum
- Anodized for corrosion resistance
- Perfect fitment means no issues down the line
- No engine timing tools required
-
VTT Is proud to offer the Turbosmart Kompact EM DV for the N55 The award-winning Kompact EM series Diverter Valves, are the world’s first truly plug and play Diverter Valves. Simply unplug and unbolt your OEM Diverter Valve, and install ours in its place. No adapters, hoses, or extra assembly required. All this while retaining complete OE control of the DV’s operation.
-
Looking for a way to do burnouts in your ATC13-2 Equipped Xdrive BMW that doesn't have an RWD mode such as G-Series non-M vehicles, and SUVs? We were too! VTT is proud to offer the ONLY easy-to-install, plug, and-play Xdriove controller on the market. This device will allow you to turn off, and turn on again your X-drive capability from the driver seat with a remote. While other options do exist such as X-Delete, or an in-dash gauge, one is a very slow process and is not viable to use as a way to do a burnout at the drag strip, and the other is a very expensive, AND very intrusive device that requires removal of most of the dash, and installing a gauge. Our solution takes 30 seconds to install once you gain access to the underside of the vehicle, and can be removed just as easily. Once installed, you can remotely disable your Xdrive from the driver's seat to perform your burnout, and then quickly enable it again to perform your launch with AWD active. This action does NOT require a key cycle, as soon as you activate it again the car will dismiss any lights and codes generated. This truly is the best of both worlds for ease of use, practicality, and effectiveness, all while coming at a very affordable price. This device uses a BMW plug on one end, and our custom-printed male plug on the other, for a plug, and play OEM fit. NO cutting any wires!
PLEASE NOTE: WHEN ACTIVATED YOUR DASH WILL LIGHT UP WITH CODES BECAUSE YOU ARE IN ESSENCE DISCONNECTING THE TRANSFER CASE. YOU MAY ALSO EXPERIENCE SPORT STEERING DURING THIS TIME WHICH MEANS A HARDER-TO-TURN WHEEL. THIS IS ALL NORMAL. WE ONLY SUGGEST USING THE DEVICE FOR SHORT PERIODS OF TIME, SUCH A BURNOUT AT THE STAGING AREA OF A DRAG RACE. IN SOME INSTANCES, THE CAR WILL NOT ALLOW A BURNOUT IF THE BRAKE, AND THROTTLE ARE APPLIED AT THE SAME TIME DUE TO ECU LOGIC, IN THESE INSTANCES INSTALLING OUR WIRELESS LINE LOCK ELIMINATES THIS ISSUE. MANY TIMES AN AFTERMARKET TUNE WILL ALSO ELIMINATE THIS ISSUE.
THIS DEVICE CAN BE USED FOR THINGS SUCH AS DRIFTING DONUTS ETC., BUT WE DO NOT CONDONE ANY DRIVING OUTSIDE OF LEGAL GUIDELINES. PLEASE USE THIS PRODUCT RESPONSIBLY. SEE ABOVE FOR WHAT IS GOING TO HAPPEN WHEN YOU ENGAGE THIS DEVICE
THIS DOES NOT FIT F-SERIES VEHICLES
Install/User Guide is here - Install Guide
Features:- Works on any vehicle outlined below from stock to tuned
- 30-second install
- 30-second removal
- NON-intrusive ZERO cutting of wires, or taking anything apart on the vehicle TRULY plug and play
- OEM fit and finish on the plugs
-
Looking to protect your single turbo investment, dont have a ton of room, and need a low profile filter that can flow what you need? VTT Has you covered with our Low Profile Single turbo Air Filters. These filters are custom-made for VTT. They are made with a heat-resistant silicone base, and a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. We currently offer them in Black, and 3 flange sizes. 3", 4" and 5" flange. With two filter heights. Tested at over 1200WHP with no loss of power observed. Filter Options - Offered in White, and Black with the following dimensions Short - 3.75" Tall, 7.5" OD Large end, 5" Small end 3", 4", or 5" Flange Tall - 4.5" Tall, 7.5" OD Large end, 5" Small end 3", 4", or 5" Flange
-
WHP Level supported (with proper fuel, upgrades, and tuning) Stock - 675WHP
-
VTT/PFS Stainless Steel Fuel Strainer for Walbro In-Tank Pumps
The fuel system is one of the most critical components of your entire build—it delivers the fuel that translates into big power and fast times! Without proper filtration, your Walbro 274, 285, or 295 fuel pump can ingest contaminants, leading to premature failure. However, choosing the right strainer or pre-filter is just as important as post-filtration. 🚨 Why Does Your Fuel Pump Need the Right Strainer? ✅ Too fine of a filter can restrict flow and cause the inlet to collapse. ✅ Too coarse of a filter can allow debris to pass through, damaging the pump and engine. ✅ Low-quality materials can break down, collapse, or cause fueling issues—leading to potential engine failure.The VTT/PFS Stainless Steel Fuel Strainer – The Ultimate Solution
-
Looking to make sure all metal contaminates that are possibly in your oil are not circulated? VTT has you covered with our Titanium Magnetic oil drain plugs for BMW, and any other vehicle that uses an M12x1.5 drain plug. This drain plug will capture any ferrous metal particles in your oil, and capture them to be cleaned during your next oil change. It also is stronger than a Steel or Aluminum drain plug, and looks cool! These are made from GR5 Titanium and use a rare earth magnet to capture metal particles in your oil... Kit includes:
- 1 Titanium Drain Plug
- 1 M12 Crush Washer
-
This is an easy way to order all 3 VTT Billet engine caps for Valve Cover, Power steering, and Oil Filter Cap. We offer these caps in 4 colors - Red, Black, Blue, and Clear anodize
-
Looking to get rid of the troublesome and expensive DI injectors on your BMW N54 and move to PI only and a standalone? If so VTT has you covered with its new N54 PI delete kit. This kit allows you to SAFELY remove the DI injectors, install our delete fittings, and run PI only. We machined these deletes from 310 Stainless for extreme heat, and corrosion resistance, and include 3 hold downs. These DI deletes COMPLETELY get rid of all factory provisions, including the seal. If the seal is left intact with no fuel to cool the injector or delete it will quickly overheat and melt the delicate seal causing combustion gasses to escape the engine creating misfires, and worse possibly damaging your injector bore on the cylinder head. Our deletes are machined to be a press fit into the cylinder, and can be either cooled with liquid nitrogen, and dropped in, or tapped in with a hammer, and then held down with the included hold downs. We also include M6 tapped holes on the top of each one in case they need to be removed you can attach a slide hammer, and remove the delete. These are sold as a kit and come with the following
- 6 - 310 Stainless DI Delete fittings
- 3 - Hold down brackets
EXTREME ENGINE MODS ARE REQUIRED TO RUN THIS KIT, PLEASE SEE BELOW
-
Looking to remove the HPFP or DI system on your N54? This plate will block the vacuum pump and prevent oil leaks. You will need to remove any fuel lines, etc. Kit includes
- Block Plate
-
VTT N54 GC “F-RB” Turbochargers
Stock Frame. Full Re-Design. Up to 850WHP.
WHP Supported (with proper fuel system, supporting modifications, and tuning): Stock Engine – Up to 850WHP VTT is proud to introduce the completely redesigned N54 GC “F-RB” (Full Re-Brand) turbocharger lineup for the BMW N54 platform. This is not a refresh of the previous GC platform — it is an entirely new turbocharger system engineered from the ground up using 100% brand-new components throughout. Every major section of the turbocharger has been redesigned with one goal in mind: deliver the flow capability of a much larger turbocharger while maintaining the fitment, response, and drivability expected from a stock-frame system. The result is the most advanced VTT GC turbocharger ever produced. -
VTT S55 Silicone Charge Pipes – BMW M3 / M4
Looking to get the most efficient turbocharger operation out of your S55-powered BMW? The best way to do that is by eliminating all restriction in the inlet and charge tract—starting with the factory charge pipes.
The OEM pipes are poorly designed and severely flattened as they exit the turbos before the intercooler, creating unnecessary restriction. VTT S55 Silicone Charge Pipes eliminate this bottleneck by providing a true, full 2" ID from the turbochargers to the intercooler, allowing maximum airflow and improved turbo efficiency.
Unlike aluminum pipes, silicone also prevents heat soak, keeping intake temperatures more consistent under hard driving.
These pipes are constructed from 7-ply, wire-reinforced silicone, with an additional inner silicone layer, and have been pressure tested to over 150 PSI for extreme reliability.
Available Color Options
-
Black exterior / Blue interior
-
Blue exterior / Red interior
-
Red exterior / Black interior
Fits all S55-powered BMW M3 & M4 models
-
-
Looking to adapt your wheel bore size to a smaller hub bore? VTT has you covered with our hub-centric adapters. These adapters are made from Billet 6061-T6 aluminum, and anodized in black. We have these sizes currently
- 57.1mm hub to 60.1mm wheel bore
- 57.1mm hub to 64.1mm wheel bore
- 57.1mm hub to 66.1mm wheel bore
- 57.1mm hub to 66.6mm wheel bore
- 57.1mm hub to 67.1mm wheel bore
- 57.1mm hub to 70.3mm wheel bore
- 57.1mm hub to 71.6mm wheel bore
- 57.1mm hub to 72.6mm wheel bore
- 57.1mm hub to 73mm wheel bore
- 57.1mm hub to 74mm wheel bore
- 57.1mm hub to 74.1mm wheel bore
- 64.1mm hub to 72.6mm wheel bore
- 66.6mm hub to 72.6mm wheel bore
They are sold in sets of two, order TWO SETS for a full car, or one set per axle.
-
Looking to convert your 5x112 M14x1.25 vehicle, such as A90/91 Toyota Supra, and 2020+ BMW G-series, to 5x114 to open up your wheel options? We got covered with our VTT wheel stud conversion kits. These kits are forged cold-rolled steel in 10.9 class, with Black Oxide corrosion-resistant coating for years of use, and convert your vehicle to M12x1.50 wheel studs, which allow you to fit 5x114 wheels with no other changes. No wobble bolts or redrilling here. Simply install the studs, put the wheel on, and the lug nuts will center the wheel. This kit is Black Studs with Black Lugnuts, and we offer it in 10 or 20 pieces if you want to only do the front/rear or both.
Our studs are forged from cold-rolled 10.9-class steel and finished with a black oxide corrosion-resistant coating, ensuring years of dependable service in both street and motorsport environments.
We offer one optimized size: 85mm overall length, with the following breakdown:
-
75mm total thread length
-
10mm bull nose for smooth lug engagement
-
12mm short-thread section (hub side)
-
12mm unthreaded shank
-
48mm long-thread section (lug nut side)
PLEASE NOTE – THESE STUDS WILL ONLY WORK IF YOUR WHEELS ARE DRILLED M14 THESE WILL NOT WORK FOR WHEELS DRILLED M12!
These studs are coated using Black Oxide, which does protect, BUT even when using Black Oxide, the studs CAN develop surface rust if left to the elements. We suggest a slight coat of WD-40 when you clean your wheels to prevent this.
DO NOT USE ANY HUB-CENTERING SLEEVES WITH THESE CONVERSION STUDS, THE LUGS WILL CENTER THE WHEELS. THE USE OF A CENTERING SLEEVE MAY LEAD TO STUDS BREAKING. FOR INSTALLATION YOU MUST SNUG EACH LUG UP SLOWLY, AND IN A STAR PATTERN TO GET THE WHEEL CENTERED ON THE LUGS, FAILURE TO DO SO CAN ALSO LEAD TO FAILURE.
-
-
Our studs are forged from cold-rolled 10.9-class steel and finished with a black oxide corrosion-resistant coating, ensuring years of dependable service in both street and motorsport environments.
We offer one optimized size: 85mm overall length, with the following breakdown:
-
75mm total thread length
-
10mm bull nose for smooth lug engagement
-
12mm short-thread section (hub side)
-
12mm unthreaded shank
-
48mm long-thread section (lug nut side)
These studs are coated using Black Oxide, which does protect, BUT even when using Black Oxide, the studs CAN develop surface rust if left to the elements. We suggest a slight coat of WD-40 when you clean your wheels to prevent this.
These studs are coated using Black Oxide, which does protect, BUT even when using Black Oxide, the studs CAN develop surface rust if left to the elements. We suggest a slight coat of WD-40 when you clean your wheels to prevent this.
-
-
Building a kit using Mac solenoids to control boost? Need an easy way to mount it? VTT-FAB has you covered with our billet Mac Solenoid brackets. Machined from 6061 billet and anodized in 3 colors, these are the perfect way to mount your Mac valve and look good while doing it. Each kit includes:
- One Mac Solenoid bracket (3-Port or 4-Port)
- 2 Allen screws to hold the valve to the bracket
- M6 Mounting Bolt
-
VTT S55/N55 EWG Billet Aluminum Valve Cover
Performance. Durability. Style.
VTT is proud to introduce the S55/N55 EWG Billet Aluminum Valve Cover — engineered for enthusiasts who demand performance and reliability without compromising design. Whether you’re replacing an aging OEM plastic cover or running a single turbo conversion that requires better clearance and heat resistance, this cover delivers on every front.
Designed to eliminate the failure-prone factory PCV system, the VTT Billet Valve Cover gives you complete control over your crankcase ventilation setup. Each unit is fully baffled to reduce oil carryover and maintain clean, efficient crankcase operation. For best results, pair it with a quality catch can system.
Valve Cover Features
-
100% CNC-Machined from 6061-T6 Billet Aluminum – Exceptional strength, precision, and durability
-
Anodized Finish in Multiple Colors – Choose a clean, custom look for your engine bay
-
Lightweight Design – 9.7 lbs (compared to 7.9 lbs stock; only a 1.8 lb difference)
-
Fully Modular PCV Configuration – Configure your PCV system exactly how you want it
-
Fully Baffled Ports – Prevents oil escape and ensures consistent crankcase pressure
-
Ideal for Single Turbo Conversions – Provides improved clearance and superior heat resistance
-
Durable & Reliable Construction – A significant upgrade from the OEM plastic cover
-
-
Looking to remove your BOV either for leak testing, or dont want to run one, and your charge pipe or housing has a flange on it. You can use this billet plate to block off the BOV flange. Uses the O-ring from the BOV to seal, and removes the BOV. Fitment: Tial BOV Turbosmart BOV with female flange like Tial
-
VTT is proud to announce our B58 Gen 1 Billet/Silicone coolant hose upgrade kit! The factory plastic coolant connectors are prone to breaking over time, and the hoses are just your standard run-of-the-mill coolant hose. We wanted to provide an upgrade to both areas. What we came up with is Billet 6061-T6 connectors anodized black for corrosion resistance, and 6-ply silicone molded silicone hoses in the factory shapes. Currently, these fit most Gen 1 B58 applications F2X/F3X. Application chart below.
They may not fit some models, we have not test fit on all models.
Please bear in mind, the B58 coolant hoses can be difficult to install, and may require removal of other items on the engine to reach the hose connections.
-
Racing can be rough on brake pads, if you have worn through a set of pads while using your VTT brake kit you can buy replacement pads here. Different options are available as shown below. Please take a look at your pads to see the hole orientation which will determine your pad type BP-10 pads for Dynalite calipers Single hole in the pads for the location pin - Mostly street and some racing we recommend for rear kits BP-20 pads for Dynalite calipers Single hole in the pads for the location pin - More aggressive street driving, and racing recommended for front or rear kits BP-10 pads for Dynapro calipers with twin holes in the pads for the location pins - Mostly street and some racing we recommend for rear kits BP-20 pads for Dynapro calipers with twin holes in the pads for the location pins - More aggressive street driving, and racing are recommended for front or rear kits Hawk PC (Performance Ceramic) Very Quiet, Very low dust, Hawk claims 32% increase in stopping power over stock pads. A good balance of street, and aggressive driving. Recommended for front or rear kits
MANY MORE AGGRESSIVE BRAKE PAD COMPOUNDS EXIST FROM VARIOUS MANUFACTURERS, AND YOU CAN TAILOR TO YOUR NEEDS. Y OU CAN FIND THESE BY USING THE CALIPERS STYLE NUMBERS BELOW.
6-PISTON DYNAPRO PAD STYLE 6712
4-PISTON DYNAPRO PAD STYLE 7812
-
VTT Ultimate Modular Valve Cover & PCV System – N54
VTT is proud to introduce a ground-up solution designed to give you full control over your valve cover and PCV setup. Tired of being told you must run dual -10 lines from your valve cover to a catch can? So were we. With this system, you can set it up your way—whether that’s a fully vent-to-atmosphere (VTA) setup, a one-way oil cap breather, or any combination in between. Nothing on the market comes close to the versatility, modularity, and performance of this system. Whether you’re looking for a complete Valve Cover + PCV combo, or just one or the other—you choose how much or how little to run.
Valve Cover Features:
- 100% CNC-Machined 6061-T6 Aircraft-Grade Aluminum Anodized Finish in a variety of color options Lightweight – Only 9.7 lbs (vs. 7.9 lbs stock – just a 1.8 lb difference) Fully Modular – Customize your valve cover and PCV system to your exact needs All Ports Fully Baffled – Keeps unwanted oil out of your catch can or intake system Affordable – Lower cost than most non-modular options on the market
-
VTT B58/S58 Head Port Block-Off / Built Check Valve Kit
The VTT B58/S58 Head Port Block-Off / Check Valve Kit is designed to either seal off or convert the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases — but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time.
This kit provides two configuration options:
-
Block-Off Version – Completely seals the factory head ports to prevent oil intrusion and unwanted vacuum leaks.
-
Billet Check Valve Version – Converts the head ports into a robust internal PCV system using precision-engineered check valves. These one-way valves allow vacuum to function as intended while blocking boost pressure from entering the crankcase or charge tract.
By bypassing the factory PCV valve in the valve cover, the VTT kit replaces it with an improved three-valve internal system integrated directly into the cylinder head. This design improves reliability, simplifies plumbing, and ensures consistent crankcase pressure management — critical for both stock and high-performance B58/S58 applications. This kit does NOT require any tapping, meaning no metal to get into the engine etc. You simply tap the plugs or check valves into place.
Key Features
-
Eliminates oil draw-through into the intake manifold
-
Prevents carbon buildup on intake valves
-
Converts to an internal, head-integrated PCV system
-
Utilizes precision-machined check valves for boost sealing
-
Fully reversible — Block-offs or valves can be removed if needed
- No tapping is required. Easy install, by tapping the blocks or valve into place.
-
-
VTT Carbon Fiber Driveshaft for BMW Applications
Why overpay for a carbon fiber BMW driveshaft?
VTT is proud to offer a premium carbon fiber driveshaft manufactured exclusively for VTT in the USA by GCDS (Gulf Coast Driveshaft) — one of the premier driveshaft manufacturers in the country with extensive experience in high-performance and drag racing applications.
Each driveshaft is constructed using 3" x 1.55 wall carbon fiber tubing (3.31" OD), paired with NEAPCO Performance 1350 series U-joints, then bonded using a proprietary high-strength process and precision balanced to within 1/8 in-oz as a complete assembly.
Every shaft is torque tested in-house prior to shipping to ensure proper bonding and structural integrity. GCDS and VTT are among the few manufacturers that perform full torque testing on each shaft before it leaves the facility.
To complete the system, the driveshaft is paired with VTT-designed 7075 aluminum adapters, eliminating the factory guibos and unnecessary flex points. The shaft connects directly to the BMW 3-bolt front flange, while a VTT 4340 rear adapter replaces the factory slip-in / screw-retained shaft design for improved strength and reliability.
Proudly Made in the USA.
PLEASE NOTE! YOU MUST SEND US YOUR VIN NUMBER TO PROPERLY PROCESS YOUR ORDER, IF YOU DO NOT SEND YOUR VIN, YOU ORDER IS GOING TO BE HELD
PLEASE NOTE! Driveshafts can have UNUSUALLY LONG LEAD TIMES. We hope to reduce this with GCDS, but if the shaft shows OUT OF STOCK, expect a lead time of 3–4 weeks, unless we specifically state that it can ship sooner, this can possibly be longer
Due to the nature of these shafts being manufactured by a 3rd party, ANY ORDERS PLACED FOR VTT CF DRIVESHAFTS ARE 100% FINAL.
NO REFUNDS. NO CANCELLATIONS. FOR ANY REASON.
THIS INCLUDES LONG LEAD TIMES.
PLEASE ORDER CAREFULLY. ONCE THE ORDER IS PLACED, IT IS FINAL.
-
Want to tighten up the diff on your 2021+ G8X M3/M4 and help eliminate any extra diff movement on hard launches? We got you covered with our Billet diff inserts. They are machined from 6061-T6, and anodized black for a long-lasting finish. They install easily by removing the diff bolts one at a time, inserting the bushing, and then retorquing each diff bolt. They are sold in 3 ways, front side only, rear side only, and Both front and rear side. Installing the Front side only requires less time, and labor, to install the rear, you must support the diff as you need to completely separate the flange from the supports Kit includes:
- Optional 4 G8X Front Side Billet Diff bushing inserts
- Optional 4 G8X Rear Side Billet Diff bushing inserts
- Optional 4 12.9 M12 bolts, and hardened Washers
Please note: A slight increase in NVH may be noticed from this product as it stiffens up the rear end, and removes some of the sound dampening of the rubber bushings
DOES NOT INCLUDE DIFF BRACE IN PHOTOS!
All products that are designed to stiffen or reduce drivetrain movement inherently have the tendency to increase NVH or Noise, Harness, or vibration. While these bushings inserts have been found to add little NVH in most instances. Your results and sensitivity to NVH may vary. This product is designed to reduce drivetrain movement, and that was the goal when designing and manufacturing this product. Returns for NVH are not accepted once products are installed.
-
VTT is proud to offer its very own Game Changer S55/N55 to B58 Coil conversion kit for the BMW S55/N55 platforms. The 55 series of engines has notoriously had ignition problems with the factory coils, while aftermarket upgrades do exist, they can be bulky. The solution is the BMW B58 ignition coils which are extremely robust and can support well over 1000WHP with no issues. This means a plug-and-play affordable solution that fits like stock, and looks AMAZING doing so! We designed our own 6061-T6 Billet bracket in a plethora of colors including matching shades for every S55/N55 Valve Cover. This means you can mix and match the color of the bracket with coil color, with VC color to truly tailor your engine bay to look exactly how you want it to!
Note: Flash setting changes may be required when installing the conversion kit to ensure the proper function of the B58 coils with S55/N55 DME. This can be found in almost all flashing software settings such as MHD, Bm3, etc.
-
Need a Tee fitting for plumbing Vacuum, or Boost lines, Don't want to use cheap plastic ones that can get soft when hard, and brittle after they heat cycle? We didn't either, which is why we machined these high-quality billet tees to solve this issue. Machine from 6061-T6 aluminum, and anodized in black for a long-lasting corrosion-free finish, these tees look great, and will you never have to worry about one failing. We offer them in two sizes, each size has 12mm legs and 3 barbs:
- 7.60mm / -4 Push Lock for people looking to use -4 push lock hose or -4 AN hose. This is a perfect fit for those.
- 1/4" For people looking to use 1/4" vacuum tube
-
Need to work on the B58 engine outside of the car? Lift it to put on an engine stand etc? BMW makes an engine lifting tab but it costs $25, and they do not always have them in stock. We made our own, to avoid the high cost, and possibly long wait time. The perfect tool when you want to lift the engine balanced in the place BMW designed for it to be lifted. Made out of coated steel for high strength, long life, and corrosion resistance. Fits all B58 models, and possibly S58
-
VTT is proud to offer the very best charge pipe solution for the BMW E Series N54/55 platforms. This system completely does away with the restrictive, and muli-connection stock charge pipe system, and replaces it with a single 6-ply, Heat Resistant, Wire reinforced silicone charge pipe rated at over 200 psi.
FITMENT:
• E Series N54 vehicles 335, 135 (Does not fit Z4, and 5 Series) •E Series N55 vehicles 335, 135 (Does not fit SUV or other models) -
Get rid of the restrictive stock plastic intake on your E-Series N55 powered BMW, and replace it with our 2.5 full flow aluminum intake. This is a MUST when upgrading turbos, or trying to get the most from your stock turbo. Constructed of high-grade aluminum, and powder coated with a very durable gloss black finish this upgrade looks as good as it performs.
-
Tired of your Dragy flying all over the car as you try to do runs? Tired of low sats or no sats warning due to improper location of the Dragy in the vehicle? Well say goodbye to those issues with our new Carbon Fiber and Plastic Dragy holders. These are made from either 100% Pre-Preg Carbon Fiber, or molded plastic for a perfect fit. The carbon fiber gives it just the right look to add to your performance vehicle! Each holder has dual Suction cups and will stick to any smooth surface. We suggest mounting them in the upper left or right corner of your windshield with a full view of the sky. Dragy holder features
- Stop your Dragy from flying off the dash, and having to search for it
- Position your Dragy in the optimal position for the best satellite coverage
- VTT Dragy holder exposes the entire top of the Dragy so nothing is blocking the receiver from the Satellite
- The charging port is not blocked and can be accessed with the cover on
- Choose from REAL Carbon Fiber or Molded Plastic
-
VTT N54 Stock-Style Ignition Coil Hold-Down Bracket Kit
BMW N54 Platform
Tired of sloppy ignition coil placement with your stock N54 valve cover? Upgraded to a VTT Cast or Billet valve cover and want to continue running stock-style coils, but with a secure, positive hold to the spark plug?
We’ve got you covered.
The VTT N54 Stock-Style Coil Hold-Down Bracket Kit eliminates coil lift and movement by positively securing each coil in place. This prevents misfires caused by coils being pulled off the plug under vibration, heat, or high boost—while also delivering a clean, aggressive engine bay appearance.
This system utilizes our proven N54 → B58 conversion bracket platform, paired with six billet S-style hold-down brackets designed specifically to lock stock-style coils firmly into
-
VTT is proud to announce our F8X Series S55 engine catch can set up. This kit uses our already extremely popular modular catch can, and couples it with a custom CNC 6061 bracket, VTT CNC banjo fittings, VTT 5 ply silicone hose, and Push lock fittings. Installation is simple, takes about 30 minutes to 2 hours depending on your skill level, and requires removing one factory hose to install the VTT hoses. Giving an OEM fit and finish when installed. Our kit stands out from others on the market by using high-quality AN fittings, and VTT Banjo adapters. This is the ONLY catch can kit that is plug, and play with our CNC Billet Valve cover
-
VTT is happy to offer our very unique and universal billet mount to fit any roll bar or cage with 1.5", 1.75", or 2" diameter tubing. These mounts are designed from 6061-T6 aluminum and are made to SECURELY hold a JBL Flip version 3 - Version 6 and allows you to bring music into your race car, off-road vehicle, rock crawler, boat, basically anything that has a length of tubing this will allow you to have an easy way to have tunes without having to install and mount a stereo system. They can also be used as a single mount to hold things such as a helmet, steering wheel, or anything you want to quickly hang for easy access once seated. For the JBL flip you will need TWO mounts, simply install them loosely, snap in your JBL Flip to get the proper spacing, and tighten down. The device is then securely mounted and can be removed easily. We offer these in a variety of anodized colors for a long-lasting durable finish including Black, Red, Blue, Clear, Orange, and Green Mounts are sold individually Features:
- Billet 6061-T6 Aluminum construction anodized in a variety of colors
- Can be used to SECURELY mount a JBL Flip 3-6 to anything that has a length of 1.5", 1.75" or 2" tubing
- Can also be used as a universal mount for anything you need to hang in your race car, off-road vehicle, etc
- Completely reversible, and can be moved from vehicle to vehicle
-
VTT is proud to introduce our billet replacement for the BMW B58 factory plastic oil filter housing cap.
The OEM plastic cap is a known weak point that can crack or deform under heat and pressure. Our billet solution not only eliminates that failure risk, but also integrates a high-strength magnet to capture fine metallic particles from your oil — adding an extra layer of engine protection.
Key Features
-
Direct OEM Replacement – Retains all factory provisions for the filter basket, including the critical lower pins that ensure proper oil pressure bypass function.
-
Added Protection – Built-in magnet continuously pulls metal particles from your oil, helping maintain a cleaner lubrication system.
-
Premium Construction – CNC-machined from 6061-T6 aluminum for superior durability.
-
Anodized Finish – Available in four colors for corrosion resistance and engine bay style.
-
Complete Compatibility – Designed specifically for the BMW B58 platform.
Available Colors
-
Red
-
Black
-
Blue
-
Clear
-
-
If running a Tial BOV on your N54 instead of the TurboSmart Raceport you want to run the black spring. This will provide you with the most complete vent, and eliminate any chance for flutter/surge.
-
Need to move your coolant expansion tank to the other side of the vehicle for a single turbo kit you are building, extend Map sensor plugs, or IAT, how about Throttle Body? Don't cut your factory wires. Just get a VTT-FAB extension harness, and plug and play! These come in various lengths and are covered in expanded sheathing with heat shrink on both ends for a long-lasting, good-looking finish. Available:
- Coolant Extension for late model BMW 2015+ 5 ft
- Pre-Throttle Map sensor extension harness 2 ft
- Pre-Throttle IAT Sensor extension harness 2 ft
- B58/S58/B48 etc Throttle body extension harness 2 ft
- B58 to S55 Throttle conversion/extension harness 2 ft
- EWG Actuator Extension harness, Various Lengths
- N54 stock MAP to N20 Map sensor extension
-
Improve engine/shifting feel without a huge increase in NVH or high cost! VTT G3X/G8X billet motor mount inserts upgrade mounts the way BMW does it, allowing a minimal increase in NVH while stiffening up the engine/shifting feel, and getting rid of excessive engine movement Fitment is below for GXX, G8X M2/3/4, F9X X3/4M using these mount part numbers and possibly others. They do NOT fit every engine option for these chassis. Please inquire first if you have questions 22 11 6 860 471 Engine mount, left G series Non-M 22 11 8 097 149 Engine mount, left G8X M2/3/4 22 11 6 860 457 Engine mount, left F9X X3/4M 22 11 6 860 472 Engine mount, Right G series Non-M 22119503432 Engine mount, right G8X M2/3/4 22116860458 Engine mount, right F9X X3/4M
-
Looking to up your boost limit on just about any BMW vehicle that runs a 3 or 4-wire BMW map sensor including but not limited to S58, B58, N54, N55, S55, S63, B48, B47, B42, B57, B46? We were too, so we decided to make a very easy plug-and-play kit for 3, and 4-wire BMW map sensors. These kits will allow you to completely replace the 3-wire sensor with one of our sensors, leave your stock 4-wire in place for IAT sensing, and move the power, ground, and sensor signal from the factory sensor to our sensor. These sensors have the proper scaling which will allow your tuner to simply change your map sensor scaling in the tune, and the factory ECU will be able to utilize the sensor voltage with no problem. We are offering these in 5 bar (58 psi), and 6 bar (72 psi), and each comes with a plug-and-play harness, and optional fittings for ease of installation.
Note: For the S58/B58 our Factory style Pre-Throttle map sensor is also 5 bar, and will work fine coupled with the post throttle kit, but the scaling is different, if you want matching Voltages Pre/Post throttle you can run two of these.
A variety of install pics can be found below and - Here
Scaling PDF Links: 5-Bar / 6-Bar
Features include:- Plug and Play harnesses with no wire splicing
- Output wire for connecting a PI or external controller to your post-throttle map sensor for the most stable signal that is not affected by throttle closure
- Different fittings are available for your plumbing needs.
- Can have matching voltage signals for pre/post throttle for ease of tuning, and boost reference
- B58/S58 etc Pre Throttle - 3 Wire Harness (Charge pipe to 1/8" NPT adapter needed, for B58/S58 90 degree adapter needed to provide sensor clearance)
- B58/S58 Post Throttle - 4 Wire Harness (Boost reference will be needed from manifold to sensor)
- F90 M5 Pre/Post Throttle - 4 Wire Harness (May need to repin) (Boost reference will be needed from manifold to sensor)
- Most all other platforms Pre/Post Throttle - 4 Wire Harness (May need to repin) (Boost reference will be needed from manifold to sensor)
- B58
- S58
- S63/ S63TU
- N63
- N54
- S55
- N55
- N20
- B46
- B48
- B57
- B47
-
VTT noticed a hole in the VTT A9X Supra/BMW Z4 / G2X / G42 Billet Diff Lock Down Kit market for a high-quality, lightweight, NVH-friendly, and easy-to-install Diff Lock Down kit to improve diff stability under launching, and hard cornering. So we did something about it and went to work on a very innovative design that 100% positively locks the diff down from movement, while shielding it from adding a ton of NVH, and can be used with the stock diff, and subframe bushings. This design uses existing mounting points on the vehicle, you do NOT have to remove the subframe or the Diff to install. Simply remove 4 diff bolts, drill two holes in the subframe slightly bigger, install two M10 riv-nuts, and install the lockdown, you do not even have to move the exhaust. A typical install can be 15-30 minutes for someone who is experienced working on vehicles, an hour if you like taking it slow. You WILL need a Riv-nut tool to install the Riv-nuts, we provide a link below for what we recommend on Amazon. Features:
- Lightweight 1.5 lbs for the entire lockdown plate
- Uses FOUR connection points on the Diff, and two on the subframe for the ultimate in positive diff location, this will stop all diff movement on launch, saving your guibos, etc
- 100% Billet construction from 6061-T6 aluminum
- Anodized in 4 colors for corrosion resistance, a long-lasting finish, and good looks
- The subframe does NOT have to be removed for installation
- Uses all 12.9 grade hardware
- Does not add excessive NVH
- Positively locks down the diff to eliminate all unwanted movement under launches, acceleration, cornering, etc.
All products that are designed to stiffen or reduce drivetrain movement inherently have the tendency to increase NVH or Noise, Harness, or vibration. While these bushings inserts have been found to add little NVH in most instances. Your results and sensitivity to NVH may vary. This product is designed to reduce drivetrain movement, and that was the goal when designing and manufacturing this product. Returns for NVH are not accepted once products are installed.
-
Sale!
Get the COMPLETE lockdown kit for your X3/4M at one low price. Order all 4 pieces together, and save 5%!
Transfer Case Bushing are optional
All products that are designed to stiffen or reduce drivetrain movement inherently have the tendency to increase NVH or Noise, Harness, or vibration. While these bushings inserts have been found to add little NVH in most instances. Your results and sensitivity to NVH may vary. This product is designed to reduce drivetrain movement, and that was the goal when designing and manufacturing this product. Returns for NVH are not accepted once products are installed.
-
VTT ultimate F3X ultimate rear brake conversion kit
VTT is happy to announce its new rear brake conversion kits for the F3X platforms. This is the FIRST and only kit currently on the market that will allow 15" wheels and tires to be run on the rear. This kit replaces your rear brake rotors and calipers to fit 15" wheels. It includes lightweight VTT calipers to go from the single-piston factory caliper to race-inspired 4-piston calipers. At the same time, dropping up to a whopping 20 LBS of unsprung weight off the back of your vehicle!
Pictures are for REFERENCE ONLY. All kits will come with varying hardware, brackets, and mounting styles based on the platform.
-
VTT N54 Billet Center Feed Intake Manifold
VTT is proud to introduce our ground-up engineered N54 Billet Center Feed Intake Manifold—not a rebadged sheet metal clone like others on the market. This is a purpose-built manifold designed for performance, utility, and seamless integration.
Through advanced CAE/Multiphysics simulations under both steady and unsteady state conditions, we’ve delivered a manifold that not only outflows the OEM unit but also installs with zero compromises. No need for custom charge pipes or modified throttle body harnesses—bolt it on and go.
Real-world testing on a 570WHP stock-motor F-RB Lite turbo car yielded 20–30WHP gains with no tuning changes, especially at the top of the RPM range—where it counts most. Expect even greater results with ported heads, high-lift cams, or higher-output builds.
-
Heat is the enemy of power, and the last thing you want is hot coolant heating your charge air even further right before it enters the charge cooler, but this is what BMW has done on the S58. This is done for emissions and quick warm-up purposes. However, If you are looking to make power on the S58, and are upgrading your charge cooler, or adding PI. While you are there, it takes 30 seconds to remove the coolant lines from the TB connections and replace them with our billet coolant delete kit. This completely removes the coolant from the Throttle body and provides a bypass for the coolant. Simply remove the two lines going to the throttle body, and run our hose in their place. You leave the coolant fittings on the TB open and avoid any unwanted heat being introduced into your charge tract. In our opinion a must for full effort builds. We take the work out of it for you. Kit included:
- One Plug and Play TB Coolant Delete Hose
- Billet 6061 Anodized coolant fittings for long leak-free life
- Reinforced 7-ply silicone hose for strength and longevity
- Vibration-resistant crimp clamps
- 100% plug and play, NO cutting or removing factory clamps or hoses. Fully reversible
-
Everything needed to a successful install without having to make a trip to the dealer.
-
Want to tighten up the rear differential on your 2021+ G8X M3/M4, A9X Supra, G42 2 Series, or G2X BMW and eliminate unwanted differential movement during hard launches? VTT has you covered with our Rear Billet Differential Insert Kit.
This precision CNC-machined billet insert is designed to press into the factory rear differential bushing, filling the voids in the OEM rubber bushing to dramatically reduce differential movement under load. By reinforcing the factory bushing rather than replacing it, the kit maintains the majority of the stock ride quality and comfort while improving drivetrain stability, launch consistency, and power transfer.
Installation is simple. Support the differential, remove the factory rear differential bolt, and use the factory bolt to press the billet insert into place. Once installed, replace the factory hardware with the supplied upgraded bolt, washers, and lock nut.
Kit Includes
- One CNC-Machined Billet Differential Bushing Insert
- Two 49mm Hardened Steel Washers
- One Grade 12.9 M14 Bolt
- One M14 Lock Nut
-
VTT "GC" and "GC+" Turbocharger Upgrade – BMW F90 M5 & F91-93 M8
GC Supported Power Level: Stock – 1000WHP
GC+ Supported Power Level: Stock – 1200+ WHP
Wheel / Frame Sizing (PTE Equivalent Reference)
Model Garrett Base Spec PTE Style Wheel Designation GC G25-660 58/54 equivalent GC+ G30-900 62/62 equivalent
Unleash Maximum Performance
Ready to take your BMW F90 M5 or F91-93 M8 to the next level? Skip the core charges, long lead times, and restrictive factory housings—VTT has you covered with our 100% newly cast "GC" and "GC+" turbocharger upgrades.
We preserve what BMW did correctly, while eliminating every OEM limitation: small inlet restriction, inefficient bearing housing oiling, undersized thrust structure, and anything else holding the platform back. Then we incorporate proprietary VTT enhancements and cast all components to OE quality standards.
The result is a true drop-in turbocharger solution capable of delivering 900–1000WHP with the GC, and 1200+ WHP with the GC+, while maintaining near factory spool and full compatibility with OEM oil, water, downpipe, and charge pipe connections.
WE HIGHLY RECOMMEND ADDING the BOV KIT! This will increase turbo longevity!
-
N54 Specific bracket for our Midual VTT catch cans. This is for the Dual can version. Mounts to the driver side strut bar.
-
Looking to ditch your factory wheel lugs and upgrade to a high-quality stud kit—whether for track use or simply to make wheel changes faster and easier? VTT has you covered with our Wheel Stud Conversion Kits, engineered for strength, reliability, and long-term durability.
Our studs are forged from cold-rolled 10.9-class steel and finished with a black oxide corrosion-resistant coating, ensuring years of dependable service in both street and motorsport environments.
We offer one optimized size: 85mm overall length, with the following breakdown:
-
75mm total thread length
-
10mm bull nose for smooth lug engagement
-
12mm short-thread section (hub side)
-
12mm unthreaded shank
-
48mm long-thread section (lug nut side)
These studs are coated using Black Oxide, which does protect, BUT even when using Black Oxide, the studs CAN develop surface rust if left to the elements. We suggest a slight coat of WD-40 when you clean your wheels to prevent this.
-
-
Looking for Mac solenoids for your build? We got em here at VTT-FAB so you can get everything in one place. We have 3-port, and 4-port in stock!
-
VTT Modular Silicone/Billet Intake System – BMW G2/3/4X B58TU
VTT is proud to announce our Modular Silicone/Billet Intake System for the BMW G2/3/4X platforms equipped with the B58TU engine.
After extensive testing and countless hours of fitting, we’ve created an intake system that delivers both optimized airflow and factory-level fitment.
Why Upgrade?
The factory BMW airbox itself performs well, but the intake tract down to the turbo is full of twists, turns, bellows, and even a built-in silencer that restricts flow and robs power. Our system eliminates these bottlenecks and replaces them with a 3"–3.5" free-flowing silicone intake tube, paired with either:
-
The stock airbox (for OEM appearance and sound), or
-
Our 6" high-flow cone filter with integrated velocity stack (for maximum airflow and sound).
From testing, we’ve confirmed the stock airbox is capable of supporting up to 700WHP. Beyond that, we recommend stepping up to the 6" cone filter system.
-
-
VTT Billet Aluminum Valve Cover – Cummins 6.7L (2007–2020)
Performance. Reliability. Function.
VTT is proud to introduce our Billet Valve Cover for 2007–2020 6.7L Cummins engines. Designed for truck owners who want to eliminate the failure-prone factory crankcase filter and plastic valve cover, this high-performance replacement delivers strength, style, and superior crankcase ventilation.
The factory setup is known to crack, leak, and allow excessive crankcase pressure. Our billet aluminum valve cover fixes those issues while cleaning up your engine bay and providing modular ventilation options. You can route a hose under the truck for vent-to-atmosphere operation or pair it with our VTT Billet Catch Can for maximum filtration and oil control.
Available in Red, Black, Blue, or Clear anodized finishes to complement any engine bay.
Key Features
-
100% CNC-machined from 6061-T6 aircraft-grade aluminum
-
Integrated, adjustable billet gas chamber — rotates 90 degrees for flexible hose routing
-
Multiple anodized finish options: Red, Black, Blue, or Clear
-
Modular PCV configuration — vent to atmosphere, recirculate, or run with a catch can
-
Eliminates factory crankcase filter restrictions
-
Enhances under-hood appearance and durability
-
-
If you own a BMW with hydraulic power steering, you’ve likely seen it — fluid all over the engine bay, makeshift fixes like headbands, socks, and sweatbands, yet the problem persists. We decided enough was enough and designed a ground-up billet reservoir that not only solves all the issues but also adds modern features to BMW’s outdated design.
Features & Benefits
-
100% Billet Construction – CNC-machined from 6061-T6 aluminum with Viton O-ring seals and ORB fittings throughout.
-
Increased Fluid Capacity – Extra room for expansion; we recommend filling to ~¼ into the main chamber.
-
Advanced Baffling – Upper chamber fully baffled to minimize fluid foaming and splashing.
-
Integrated Filtration – Serviceable stainless steel filter keeps fluid clean and reduces splashing.
-
Magnetic Protection – Rare-earth magnet traps ferrous particles inside the filter area until service.
-
Flexible Fitment – Choose between stock barbed fittings or AN fittings for race applications.
-
Leak-Free Cap – Fully threaded, O-ring sealed cap with integrated vent hole.
-
Breather Ready – Compatible with our VTT One-Way Breather for maximum capacity and venting; the 1" ball system vents pressure even on the hottest track days.
-
Anodized Finish – Available in 5 color options for durability and style.
-
-
VTT is proud to offer a truly plug-and-play line lock kit for select BMW vehicles that does NOT require running wiring inside the car, mounted switches, holes in the dash, etc. Our newly designed and released line lock kits use a 40amp wireless remote control switch with 4 different modes that allow you to tailor your line lock setup exactly as you prefer. You simply install the solenoids, install the harness with the switch which has all the wiring terminated, bleed the brakes, and you are ready for effortless burnouts which will not be interfered with by the DME because you are holding the brakes, nor wear your rear brake pads. You can store the remote anywhere in your vehicle, center console, cup holder, door cup holder, etc., and when you need to do a burnout to heat your race tires it's in arm's reach without running any wiring into the vehicle. Fitment is confirmed for G8X M3/4, A9X Supra - The kit itself including lines, solenoids, etc will fit most all late model BMW Chassis including F8X, F3X, G2X, etc. The main concern will be mounting the wireless switch in the passenger cowl area. The kit includes:
- Line lock solenoids with weather pack connectors
- Two Parker 90-degree -3 an fittings
- Two Stainless Steel adapter fittings
- Two DOT Approved Stainless Steel brake lines
- One complete wiring harness
- One Remote control switch with TWO remotes
