-
Sale!
VTT Billet Check Valves
$24.99 – $29.99VTT CNC Billet check valve that can be used for a variety of uses including a vacuum/boost check valve when removing the stock PCV system, and still wanting to run vacuum to the crankcase. Rated at over 100 psi, with a cracking psi of .25psi. -
VTT Ignition Coil Kits
$159.99 – $209.99VTT is proud to offer ignition coil replacements for the N5X platforms, as well as B5X, and many VAG platforms. We started our quest for coils by contacting multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once we were satisfied with the testing, we had the best performing coils made to our colors and specs. We offer these coils as complete sets for the N54, B58/S58, and the VAG platforms in either 4, or 5 cylinders. We also offer upgraded plugs which are highly recommended to change when doing coil replacements These coils come in 3 colors, Red, Black, and Blue, and are not simply an aesthetic upgrade but match or exceed the factory secondary spark energy. The VAG coil, is extremely potent, and the tester was so impressed with it compared to the factory coil, he called it a "BEAST" of a coilNote: To extract maximum performance from VTT coils minor tune changes are required to optimize dwell periods. See recommended Dwell times below
-
Sale!
VTT VAG/BMW/TOYOTA Billet Wheel Spacers
$19.99 – $34.99VTT is proud to offer billet wheel spacers for most VAG, BMW, and the A90/91 Toyota Supra platforms. These spacers are CNC machined from 6061-T6 aluminum and hard anodized black for long corrosion-free life.THESE ARE SOLD INDIVIDUALLY, FOR ONE AXLE ORDER TWO FOR A COMPLETE SET ORDER FOUR.
ANYTHING OVER 5MM WILL REQUIRE LONGER BOLTS OR STUDS, YOU CAN CHOOSE TO ADD A VTT WHEEL STUD KIT FROM THE OPTIONS.
PLEASE DOUBLE CHECK YOUR BOLT PATTERN, AND HUB BORE BEFORE YOU ORDER. INSTALLED SPACERS CANNOT BE RETURNED!
-
Sale!
VTT VAG(VW/Audi/Porsche) Billet One Way Crankcase Breather
$149.00$119.99VTT VAG Billet One-Way Crankcase Breather
VTT is happy to introduce the first and only available plug-and-play crankcase breather kits for ALL VAG (VW/AUDI/Porsche) applications that use the latch type in the photos(full application list below). With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, and remove crankcase pressure, all while adding a cool look to your engine bay.This is a SERVICE item, it is designed to capture and hold oil that is pulled from the spent gasses when it gets saturated, it must be cleaned
-
One Ethanol Racing Fuel
$69.99 – $559.99Please note: Due to heavy increases in freight costs we have had to raise prices by $50 on 54-gallon drums, and $15 on pails.
VTT is proud to be the West Coast dealer for One Ethanol racing fuel.
We have two blends available in 5-gallon pails and 54-gallon drums. See below for descriptions of both fuels
Fuel is available for local pick up only unless you email, and make arrangements for freight shipping. Be aware fuel is considered hazmat and the freight charges are equal to or more than the fuel in all instances. Fuel CANNOT be shipped normal shipping methods such as UPS, FED EX, etc
-
VTT 8V RS3/8S TTRS Silicone Charge pipes
$229.99 – $449.99VTT is proud to offer the very best charge pipe solution for the Audi 8V RS3 platform. This system completely does away with the restrictive, and muli-connection stock charge pipe system, and replaces it with two single 6-ply, Heat Resistant, Wire reinforced silicone charge pipes rated at over 200 psi. They are molded for the perfect fit in your engine bay, while not sacrificing anything in the way of flow or size. They also completely isolate your charge air from any additional heat soak coming in from the engine or ambient heat. -
VTT Billet Crankcase Breather replacement filter
$19.99 – $24.99Need a replacement filter for your VTT Billet Crankcase breather? You can order on here. We offer them in 3 heights, low 48mm, medium58mm, and tall 68mm. This is measured from base to top. The filter will include a new clamp. For reference: N54/55 mostly use the low A90 Supra use Medium Most Audi applications can fit a tall, but measure your filter before ordering. -
Sale!
VTT/Rota 15″ Wheels for VAG Platforms
$400.00$349.99Finally a reasonably priced set of Custom 15" wheels in for VAG guys!These are DIRECT plug, and play as long as you have the proper brakes such as our brake kits https://vargasturbo.com/product-category/vw-vag/audi-8v-rs3-ttrs/brake-wheel-audi-8v-rs3-ttrs/Specs as follows:- 15x9"
- 5x112 Pattern
- Conical Seat (We Recommend running Wheel studs, and the proper lug nut, can be added below)
- ET+36 Offset
- 57.1 bore
- Drilled for 14mm bolts or studs.
- 15.5OZ lbs per wheel
No adapters, no hub-centric rings needed, etc. A 15" wheel designed for the VAG platforms.The price is per wheel + shipping.
-
Sale!
VTT/VAG 5×112 to 5×114 Bolt Pattern Conversion Kits
$69.99 – $129.99Looking to convert your 5x112 M14x1.50 VAG vehicle to 5x114 to open up your wheel options? We got covered with our VTT wheel stud conversion kits. These kits are forged cold-rolled steel in 10.9 class, with corrosion-resistant coating for years of use, and convert your vehicle to M12x1.50 wheel studs which allow you to fit 5x114 wheels with no other changes.PLEASE NOTE – THESE STUDS WILL ONLY WORK IF YOUR WHEELS ARE DRILLED M14 THESE WILL NOT WORK FOR WHEELS DRILLED M12!
DO NOT USE ANY HUB-CENTERING SLEEVES WITH THESE CONVERSION STUDS, THE LUGS WILL CENTER THE WHEELS. THE USE OF A CENTERING SLEEVE MAY LEAD TO STUDS BREAKING. FOR INSTALLATION YOU MUST SNUG EACH LUG UP SLOWLY, AND IN A STAR PATTERN TO GET THE WHEEL CENTERED ON THE LUGS, FAILURE TO DO SO CAN ALSO LEAD TO FAILURE.
-
VTT M14/M12 Titanium Wheel Stud kits
$159.99 – $319.99VTT is proud to offer Titanium wheel stud kits for the owner looking for the lowest possible unsprung weight while maintaining high strength, and good looks as all come with an amazing burnt finish. This kit is 60% lighter than factory steel studs and nuts with a total kit of 20 nuts, and studs being 3.1LBS. Sets of 10 are 1.55 lbs -
VTT Reinforced Universal Silicone Hoses
$9.99 – $14.99VTT offers silicone hoses in various Push-lock sizes, we use these for our catch can kits, but they are also suitable for coolant, vacuum, boost, etc. Do not use with fuel. We offer: -10 Push Lock 24", and 18" -8 Push Lock 24", and 19.5" -6 Push Lock 24" -
VTA Breather
$39.99Not available for single can external PCV Valve. -
This harness allows you to run aftermarket brakes and not have the brake warning light on the dash due to the brake pad wear sensor being left unplugged. Direct plug, and plug, unplug the wear sensor and plug this in. Nothing else is required. Kit includes: One harness
-
VTT is proud to offer our "OBD-LOCK" OBD port locking tool. This tool is made from billet 6061-T6 aluminum and is designed to completely lock out your OBD port from being accessed. This is useful for people who do not want dealers, techs, etc from accessing their OBD port, and possibly changing a tune, etc. This is also perfect for anti-theft prevention as it will not allow a would-be thief to hook up to the car's OBD port, duplicate a key, etc. The OBD-LOCK cannot be removed without physically destroying the OBD port if you do not have the proper tools. VTT uses 5 types of screw head designs for every 200 OBD-LOCKS made. This means that worldwide only 40 OBD-LOCKS are using the same head design. For each batch of 200, we redesign the screw heads meaning every batch of 200 OBD-LOCKS will use different screw heads and tools. Each OBD-LOCK sent has its head design chosen at random. After Extensive testing, we have found that our OBD lock fits EVERY SINGLE OBD port we have tried, this means it will fit every single OBD port currently on the market from a high-end BMW to a Ford F150 diesel. If you order one, and find it does not fit, PLEASE let us know.
FITMENT: We have TWO versions one for ALL GM vehicles and one for ALL NON-GM Vehicles. Please order the one you
-
VTT RS3/TTRS Ultimate Front Drag Brake Kit
$1,159.99 – $1,849.99Looking to make you Rs3/TTRS faster in the 1/4 mile or 1/2 mile racing? Want to run 17, or 15" wheels, and slicks in the front? Want to drop close to 65lbs of weight off the front of the car at the same time? Do not want to break the bank while doing so? Look no further than the VTT Ultimake Front Drag kit for the Rs3/TTRS. This kit will allow you to run the wheel/tire combo you need to drop your ET's all while putting the car on a significant diet over the stock front brake set up. The kit is a true plug and play set up using Genuine Wilwood parts, coupled with DOT-approved brake lines, CNC rotor hats/brackets, and a CEL eliminator harness for the brake sensor. This kit comes in 3 different variations in 2 different caliper sizesDisclaimer: The HD kits are designed for street use, and drag racing. Never use for heavy braking racing environments such as Auto-X or Road Racing. Scalloped kits should never be used for street driving, and are ONE-PASS COOL DOWN DRAG RACING ONLY, EVEN IN THIS ENVIRONMENT, THEY MAY CRACK IF USED TOO AGGRESSIVELY. Always drive within your limits!
-
Sale!
VTT 15″/17″ Drag Pack Wheels for BMW/Toyota/VAG
$269.99 – $349.99Looking for a Lightweight, AFFORDABLE drag pack that looks amazing for your BMW, Toyota, or VAG platform? Look no further! VTT is proud to announce our lineup of Drag pack wheels for various BMW/Toyota/VAG fitments! We teamed up with Rota and had them open custom molds for us of their extremely popular Grid design. With these molds, we have an exclusive on 15X10, 17X10, and 17X4.5 wheels in our exact specs. The wheels currently are offered in the colors and sizes belowWe chose ET45 across the board on the rear as this is a universally easy offset to fit and can be made to fit just about any application with the use of a spacer. - VTT Spacers can be found here - https://vargasturbo.com/product/vtt-billet-wheel-spacers/
Wheels are priced EACH, meaning per wheel
PLEASE NOTE! CHECK FITMENT CAREFULLY. ANY WHEELS THAT HAVE HAD TIRES MOUNTED OR ARE DAMAGED DURING TEST FITTING ETC ARE NOT RETURNABLE!
We make NO CLAIM these fit ANY PLATFORM, or ANY factory brake set up. It is YOUR JOB to measure, and make sure they will fit BEFORE you mount tires or install them. WE NEVER suggest shaving down brake calipers to fit a smaller wheel. If they do not fit. GET A SMALL BRAKE KIT!
Colors offered:- Satin Black
- Gloss Black
- Bronze,
- Gun Metallic
- 15x10 ET45 (wheel weight 16 lbs)
- 17x10 ET45 (wheel weight 19lbs)
- 17x4.5 ET-20 (wheel weight 16lbs)
- 15x10 ET45 - (wheel weight 16 lbs)
- 17x10 ET45 (wheel weight 19 lbs)
- 17x4.5 ET-20 (wheel weight 16 lbs)
-
VTT Brake Kits Rotors/Hats only
$109.99 – $249.00This is for those running our brake kits that use our 11.75" or 13" Rotors that want to easily change between rotors for dedicated drag racing and street use. You can now buy Rotor/Hat Assemblies by themselves to switch between any of our 3 options- Scalloped (Recommended Drag use with parachute only)
- VTT HD ( Drag Use, Heavy Street duties, 1/2 Mile events, etc)
The price is for ONE ROTOR / OR ONE ROTOR/HAT ASSEMBLY
-
VTT 8V RS3 DSG Catch Can
$229.99VTT is proud to announce our 8V RS3 DSG catch can set up. Tired of DSG oil spewing all over your engine on hard launches? this kit will fix that issue at a low price and look great while doing it. What is happening is the fluid gets hot and expands there is a breather on top of the trans, and if the fluid expands enough it is pushed out of the breather up the tube, and out the vent onto your engine. This kit prevents that by allowing the fluid to be pushed up into the can while hot, and drain back into the trans once it cools down. As with our Engine catch can these use our already extremely popular modular catch can, and couples it with a custom CNC 6061 bracket, VTT -6AN to barbed fitting. Install is simple, takes about 15 minutes to an hour depending on your skill level, and requires removing the intake to gain easier access. This is the perfect complement to our RS3 engine side catch can, as they mirror each other in the engine bay. Kit Break down is as follows:- One Catch Can
- One CNC 6061 bracket
- One -6AN to barbed fitting
-
VTT/VAG Wheel Stud Kits
$69.99 – $129.99Looking to convert your VAG M14x1.5 vehicle to studs for ease of wheel install, and extra strength? We got covered with our VTT wheel stud kits. These kits are forged cold-rolled steel in 10.9 class, with corrosion-resistant coating for years of use. -
Looking to convert your 5×112 M14x1.50 VAG vehicle to 5×114.3 OR 5x120 to open up your wheel options DRAMATICALLY? We got covered with our VTT wheel spacer conversion kits. These kits are machined from billet 6061-T6 aluminum and anodized for a long-lasting finish. We then press in 10.9 class studs, with corrosion-resistant zinc coating for years of use. The spacer then accepts either a 5x114 wheel or a 5x120 wheel. The 5x114 use M14 studs, and the 5x120 use M12 studs. All the spacers have a 57.1 bore size to fit 99% of VAG applications. PLEAS NOTE! This does not mean they fit ALL VAG applications it means the fit 57.1 bore size applications, it is your responsibility to know your bore size before ordering! We offer Hub-Centric adapter rings to fit almost any wheel size No wobble bolts or redrilling here. We offer these in 4 thicknesses 15mm, 17.5mm, 20mm, and 25mm. The studs coming out of the spacer are 40″ total length and come with Black Lugnuts. Spacers that convert to 5x120 have M12 studs, ALL others have M14x1.5
-
VTT Carbon Fiber Dragy Holder
$19.99 – $49.00Tired of your Dragy flying all over the car as you try to do runs? Tired of low sats or no sats warning due to improper location of the Dragy in the vehicle? Well say goodbye to those issues with our new Carbon Fiber and Plastic Dragy holders. These are made from either 100% Pre-Preg Carbon Fiber, or molded plastic for a perfect fit. The carbon fiber gives it just the right look to add to your performance vehicle! Each holder has dual Suction cups and will stick to any smooth surface. We suggest mounting them in the upper left or right corner of your windshield with a full view of the sky. Dragy holder features- Stop your Dragy from flying off the dash, and having to search for it
- Position your Dragy in the optimal position for the best satellite coverage
- VTT Dragy holder exposes the entire top of the Dragy so nothing is blocking the receiver from the Satellite
- The charging port is not blocked and can be accessed with the cover on
- Choose from REAL Carbon Fiber or Molded Plastic
-
Looking to make you Rs3/TTRS/MK7R faster in the 1/4 mile or 1/2 mile racing? Want to run 15" wheels, and slicks in the rear? Want to drop close to 20lbs of weight off the rear of the car at the same time? Do not want to break the bank while doing so? Look no further than the VTT Ultimate Rear Drag kit for the Rs3/TTRS/MK7R. This kit will allow you to run the wheel/tire combo you need to drop your ET's all while putting the car on a significant diet over the stock rear brake set up. The kit is a true plug and play set up using Genuine Audi Calipers, coupled with StopTech Slotted rotor, or Bosch plain rotors, and CEL eliminator harness for the brake sensor. This kit also keeps your factory Electronic E-brake for burnouts.
-
Looking to go above 31PSI on your VAG vehicle that uses SENT map sensors? If so you will need this 4-bar SENT sensor with integrated IAT. These are plug and play for most 2.5L engines including DAZA, and DNWA(US VERSION), as well as some other VAG platforms. You will need to have your tuner rescale your map for the sensor, but that is the only change needed. We offer them in pairs only, which is needed on most vehicles.
-
VTT 2.5″ Billet Audi 4.0T Intakes
$579.99 – $629.99These are currently out of stock with NO ETA. We have made them so you cannot order for now...
VTT is happy to announce our 4.0T Billet intakes. These intakes get rid of the restrictive factory intakes and replace them with our billet intakes which use a billet flange to connect to the turbos with full 2.5" powder-coated aluminum tubing, which is finished off with our high flow filters. These will remove improve flow and improve turbocharger efficiency. If you want to run the intakes to the stock box, you can by cutting the tubes down and removing the filters as an option which saves $50. These fit most ALL 4.0T Variants. Model fitment- Audi RS6 C7 (4G) / V8 4.0 2013+
- Audi RS7 C7 / V8 4.0 2013+
- Audi S6 C7 / V8 4.0 2012+
- Audi S7 C7 / V8 4.0 2012+
- Audi A8 V8 4.0 2013+
-
VTT Audi 2.5TSFI Modular External PCV Plate
$229.99 – $779.99Modifying your Audi 2.5TSFI engine for more power, want to get rid of the problematic PCV set up which is hard to modify, and pulls oil from the crank into the combustion chamber via ports on the cylinder head? Using this plate will close off the factory PCV ports, and allow you to run an external PCV set up of your choice. We made the plate modular so you can use any of our myriad of fittings we already offer for popular BMW PCV systems, and catch cans. Go from mild to wild, and anywhere in between using our fittings, vacuum relieves, and check valves. We also offer complete kits with catch cans, and all hoses, and fittings for a plug, and play system to fully convert your Audi external PCV.
