• Sale!

    VTT Billet Check Valves

    $24.99$29.99
    VTT CNC Billet check valve that can be used for a variety of uses including a vacuum/boost check valve when removing the stock PCV system, and still wanting to run vacuum to the crankcase. Rated at over 100 psi, with a cracking psi of .25psi.

  • VTT Ignition Coil Kits

    $159.99$209.99
    VTT is proud to offer ignition coil replacements for the N5X platforms, as well as B5X, and many VAG platforms. We started our quest for coils by contacting multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once we were satisfied with the testing, we had the best performing coils made to our colors and specs. We offer these coils as complete sets for the N54, B58/S58, and the VAG platforms in either 4, or 5 cylinders. We also offer upgraded plugs which are highly recommended to change when doing coil replacements These coils come in 3 colors, Red, Black, and Blue, and are not simply an aesthetic upgrade but match or exceed the factory secondary spark energy. The VAG coil, is extremely potent, and the tester was so impressed with it compared to the factory coil, he called it a "BEAST" of a coil

    Note:  To extract maximum performance from VTT coils minor tune changes are required to optimize dwell periods. See recommended Dwell times below

  • Sale!

    VTT B58 A90/91 Supra Billet One Way Crankcase Breather

    VTT is happy to introduce the first and only available plug-and-play ONE-WAY crankcase breather kit for BMW B58TU A90/91 Supra applications. The B58 engine is known for poor PCV and crankcase pressure issues. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather.

  • NGK 94201 Spark plug set for all S58/B58/48 applications, and ALSO for N54/55 running the new B58 coil upgrade. We recommend these for running 100% e85, and high boost on many BMW applications including N54, N55, S55, if you upgrade to the B58 coils. These are also great maintenance replacements for your S58/B58/48 powered vehicle at a much better price than most. Plugs can be bought as a set of 6. You can add pre-gapping for an additional $25

  • Sale!
    VTT is proud to offer billet wheel spacers for most VAG, BMW, and the A90/91 Toyota Supra platforms. These spacers are CNC machined from 6061-T6 aluminum and hard anodized black for long corrosion-free life.

    THESE ARE SOLD INDIVIDUALLY, FOR ONE AXLE ORDER TWO FOR A COMPLETE SET ORDER FOUR.

    ANYTHING OVER 5MM WILL REQUIRE LONGER BOLTS OR STUDS, YOU CAN CHOOSE TO ADD A VTT WHEEL STUD KIT FROM THE OPTIONS.

    PLEASE DOUBLE CHECK YOUR BOLT PATTERN, AND HUB BORE BEFORE YOU ORDER. INSTALLED SPACERS CANNOT BE RETURNED!

  • Need to replace the gasket on your VTT Aluminum VC? Simply choose your model from the dropdowns to ensure you get the correct version.

  • Need a replacement filter for your VTT Billet Crankcase breather? You can order on here. We offer them in 3 heights, low 48mm, medium58mm, and tall 68mm. This is measured from base to top. The filter will include a new clamp. For reference: N54/55 mostly use the low A90 Supra use Medium Most Audi applications can fit a tall, but measure your filter before ordering.

  • VTT is proud to offer a Titanium hardware upgrade for all our Billet and Cast VC's. This will come with M6x30 Ti bolts N54 /N55/S55/B58 Gen 1/ B58 TU it will be an Umbrella head with a 16.3mm head. These bolts weigh half as much as comparable steel hardware and look amazing. Colors to choose from will be Burnt, Black, and Natural (silver)  

  • VTT is proud to offer Titanium wheel stud kits for the owner looking for the lowest possible unsprung weight while maintaining high strength, and good looks as all come with an amazing burnt finish. This kit is 60% lighter than factory steel studs and nuts with a total kit of 20 nuts, and studs being 3.1LBS. Sets of 10 are 1.55 lbs

  • We are happy to release our BMWB58 (Fits ALL B58 models including TU found in the A90/A91 Toyota Supra) vacuum/boost adapter. These go inline with the intake manifold fitting and provide a full boost/vacuum signal from the manifold. This fitting adds two 1/8NPT bungs to accept any fitting that has 1/8" NPT threads. You can choose options, Fitting by itself, 1/4" barb, as well as 1/8NPT plugs if you only want one barb, etc. You can choose straight or 90-degree barbs. Once installed it tucks perfectly under your engine cover. These are perfect for running your PI switch off manifold pressure which is much more accurate than charge pipe, and they are also great for BOV running the proper size line without having to drill a hole in your manifold. These do space out any sensors etc giving inaccurate readings like some of the other brands do. They are made from 6061-T6 anodized black, with steel plugs, and Blue Anodized barbed fittings. You can choose to order in a few ways. Adapter alone - $40 Basic kit - 1 Adapter, 1 barb, and one plug $45.00 Dual Barb kit - 1 Adapter, 2 barbs, $55.00

  • VTT offers silicone hoses in various Push-lock sizes, we use these for our catch can kits, but they are also suitable for coolant, vacuum, boost, etc. Do not use with fuel. We offer: -10 Push Lock 24", and 18" -8 Push Lock 24", and 19.5" -6 Push Lock 24"

  • Not available for single can external PCV Valve.

  • Do you work on a lot of BMW engines from various platforms? Tired of having to adjust universal engine stand plates to fit your engine? Hate not having access to the flywheel end with the engine on the stand? We answered yes to all of those things, we made a tool for anyone that works on BMWs often, and wanted a strong bolt-on engine stand plate that keeps the flywheel end of the engine open! These engine stand plates are machined from a solid billet of 6061-T6 aluminum and anodized in 5 colors for long-lasting corrosion resistance. The engine stand plates currently fit the following engines, N54, N55, S55, B58, S58 with more to come! These are lightweight, and rated for over 1200 lbs! Key Features:
    • Lightweight and strong billet 6061-T6, anodized for a long-lasting finish
    • Direct bolt on to the intake side motor mount location
    • Clears all accessories when installed for easy engine assembly when on stand INCLUDING flywheel or flex plate
    • Provisions for location pin, and bar to spin the engine on the stand

  • Support power level GC Stock-600WHP GC-MID Stock-650WHP (TU ONLY) GC+ Stock-800WHP Ready to take your B58 to the next level?  Don't want to deal with core charges, long lead times, or restrictive factory housings? Look no further! VTT has you covered with our 100% new casting B58 “GC” "GC-MID" and  "GC+" turbocharger upgrade. We start by keeping the great design elements of the factory B58 turbo and removing the not-so-great ones such as the small factory inlet area, bearing housing oil structure, thrust bearing, and anything else we saw that could be improved upon.  With the basics covered, we stepped it up a level adding in proprietary VTT changes and finished off by having all these parts cast to OE quality.  What this means for you is serious B58 power made easy; GC's are a drop in B58 turbocharger upgrade that supports over 600WHP while maintaining factory spool and all factory connections including oil, water, downpipe, and charge pipe.

  • Looking to fab your own turbo kit for BMW platforms, and need an easy solution to block off water lines, or create feed and drain fittings. Look no further, we offer a wide range of oil/coolant fitting options for most late-model BMW platforms. See the Full description below for a full part number breakdown

  • Looking to convert your 5×120 or 5x112 vehicle to 5x114.3 wheels, or 5x120 wheels, and open up your wheel options DRAMATICALLY? We got covered with our VTT wheel spacer conversion kits. These kits are machined from billet 6061-T6 aluminum and anodized for a long-lasting finish. We then press in 10.9 class studs, with corrosion-resistant zinc coating for years of use. The spacer then accepts either a 5x114 wheel or a 5x120 wheel. The 5x114 use M14 studs, and the 5x120 use M12 studs. All the spacers have either a 66.6mm or 72.6mm Hub bore size to fit 99% of BMW applications. We offer Hub-Centric adapter rings to fit other wheel bore sizes No wobble bolts or redrilling here. We offer these in 4 thicknesses 15mm, 17.5mm, 20mm, and 25mm. The studs coming out of the spacer are  40″ total length and come with Black Lugnuts. Spacers that convert to 5x120 have M12 studs, ALL others have M14x1.5

  • Sale!
    Looking for a Lightweight, AFFORDABLE drag pack that looks amazing for your BMW, Toyota, or VAG platform? Look no further! VTT is proud to announce our lineup of Drag pack wheels for various BMW/Toyota/VAG fitments! We teamed up with Rota and had them open custom molds for us of their extremely popular Grid design. With these molds, we have an exclusive on 15X10, 17X10, and 17X4.5 wheels in our exact specs. The wheels currently are offered in the colors and sizes below

    We chose ET45 across the board on the rear as this is a universally easy offset to fit and can be made to fit just about any application with the use of a spacer. - VTT Spacers can be found here - https://vargasturbo.com/product/vtt-billet-wheel-spacers/

    Wheels are priced EACH, meaning per wheel

    PLEASE NOTE! CHECK FITMENT CAREFULLY. ANY WHEELS THAT HAVE HAD TIRES MOUNTED OR ARE DAMAGED DURING TEST FITTING ETC ARE NOT RETURNABLE!

    Colors offered:
    • Satin Black
    • Gloss Black
    • Bronze,
    • Gun Metallic
    5X120 72.6 Hub Bore (Most all BMW fitment prior to G series, including E Series e36, E46, E90, E82, F series F8X, F3X, F2X, ETC
    • 15x10 ET45 (wheel weight 16 lbs)
    • 17x10 ET45 (wheel weight 19lbs)
    • 17x4.5 ET-20 (wheel weight 16lbs)
    5X112 66.6 Hub Bore  (Fits all-new BMW including G Series G20, G80, G30, Etc. All MK5 Toyota Supra, and most VAG with the use of a centering ring)
    • 15x10 ET45 - (wheel weight 16 lbs)
    • 17x10 ET45 (wheel weight 19 lbs)
    • 17x4.5 ET-20 (wheel weight 16 lbs)

  • This is for those running our brake kits that use our 11.75" or 13" Rotors that want to easily change between rotors for dedicated drag racing and street use. You can now buy Rotor/Hat Assemblies by themselves to switch between any of our 3 options
    • Scalloped (Recommended Drag use with parachute only)
    • VTT HD ( Drag Use, Heavy Street duties, 1/2 Mile events, etc)

    The price is for ONE ROTOR / OR ONE ROTOR/HAT ASSEMBLY

  • Sale!
    Are you building a single kit for the N54, N55, or S55 platform?  M7 Locking exhaust nuts is not easy. So we made our own to combat the issue. These are the perfect solution to the problem of hard-to-find M7 lock nuts. Sold individually so order the number you need.

    Note:  This is nuts ONLY Stud not included, by our extended M7 studs here - https://vargasturbo.com/product/vtt-fab-extended-m7-n54-n55-s55-b58-2-port-head-studs/

  • VTT is proud to offer our "OBD-LOCK" OBD port locking tool. This tool is made from billet 6061-T6 aluminum and is designed to completely lock out your OBD port from being accessed. This is useful for people who do not want dealers, techs, etc from accessing their OBD port, and possibly changing a tune, etc. This is also perfect for anti-theft prevention as it will not allow a would-be thief to hook up to the car's OBD port, duplicate a key, etc. The OBD-LOCK cannot be removed without physically destroying the OBD port if you do not have the proper tools. VTT uses 5 types of screw head designs for every 200 OBD-LOCKS made. This means that worldwide only 40 OBD-LOCKS are using the same head design. For each batch of 200, we redesign the screw heads meaning every batch of 200 OBD-LOCKS will use different screw heads and tools. Each OBD-LOCK sent has its head design chosen at random. After Extensive testing, we have found that our OBD lock fits EVERY SINGLE OBD port we have tried, this means it will fit every single OBD port currently on the market from a high-end BMW to a Ford F150 diesel. If you order one, and find it does not fit, PLEASE let us know.

    FITMENT: We have TWO versions one for ALL GM vehicles and one for ALL NON-GM Vehicles. Please order the one you

  • Sale!
    Looking to convert your 5x112 M14x1.25 vehicle such as A90/91 Toyota Supra, and 2020+ BMW G-series to 5x114 to open up your wheel options? We got covered with our VTT wheel stud conversion kits. These kits are forged cold-rolled steel in 10.9 class, with corrosion-resistant coating for years of use, and convert your vehicle to M12x1.50 wheel studs which allow you to fit 5x114 wheels with no other changes.

    PLEASE NOTE – THESE STUDS WILL ONLY WORK IF YOUR WHEELS ARE DRILLED M14 THESE WILL NOT WORK FOR WHEELS DRILLED M12!

    DO NOT USE ANY HUB-CENTERING SLEEVES WITH THESE CONVERSION STUDS, THE LUGS WILL CENTER THE WHEELS. THE USE OF A CENTERING SLEEVE MAY LEAD TO STUDS BREAKING. FOR INSTALLATION YOU MUST SNUG EACH LUG UP SLOWLY, AND IN A STAR PATTERN TO GET THE WHEEL CENTERED ON THE LUGS, FAILURE TO DO SO CAN ALSO LEAD TO FAILURE.

  • Soft bushings are the enemy of launching hard, and keeping your drivetrain together. The BMW Transfer Case bushings are notoriously soft, and that is the opposite of what you want when launching a car hard. You can replace the bushing with a solid one, but this is time-consuming usually requires lowering or removing the transfer case, and results in a lot of added NVH. The best path is simply to reduce the amount of flex of the factory bushing so you keep the nice manners when cruising around town, and at idle, but when its time to the launch the transfer case cannot move as it could without the insert. These come as a set of two with 2 bolts to keep them in place. Install time once you get to them is about 2-3 minutes. Could not be easier. Put some lube on them, push them in, and tighten the screws. These are a MUST for high-power G8X, and F9X X3/X4M Builds. All platforms they fit are below.  Features:
    • 6061- T6 aluminum construction
    • Easy to install
    • Fully reversible
    • Do not add NVH
     

  • Looking to make sure all metal contaminates that are possibly in your oil are not circulated? VTT has you covered with our Titanium Magnetic oil drain plugs for BMW, and any other vehicle that uses an M12x1.5 drain plug. This drain plug will capture any ferrous metal particles in your oil, and capture them to be cleaned during your next oil change. It also is stronger than a Steel or Aluminum drain plug, and looks cool! These are made from GR5 Titanium and use a rare earth magnet to capture metal particles in your oil... Kit includes:
    • 1 Titanium Drain Plug
    • 1 M12 Crush Washer

  • Tired of your Dragy flying all over the car as you try to do runs? Tired of low sats or no sats warning due to improper location of the Dragy in the vehicle? Well say goodbye to those issues with our new Carbon Fiber and Plastic Dragy holders. These are made from either 100% Pre-Preg Carbon Fiber, or molded plastic for a perfect fit. The carbon fiber gives it just the right look to add to your performance vehicle! Each holder has dual Suction cups and will stick to any smooth surface. We suggest mounting them in the upper left or right corner of your windshield with a full view of the sky. Dragy holder features  
    • Stop your Dragy from flying off the dash, and having to search for it
    • Position your Dragy in the optimal position for the best satellite coverage
    • VTT Dragy holder exposes the entire top of the Dragy so nothing is blocking the receiver from the Satellite
    • The charging port is not blocked and can be accessed with the cover on
    • Choose from REAL Carbon Fiber or Molded Plastic
         

  • Sale!
    Looking to convert your Supra or G Series BMW to wheel studs. Want to get rid of the difficult to find M14x1.25 ultra-fine thread and convert it to M14x1.15? We got covered with our VTT wheel stud conversion kits. These kits are forged cold rolled steel in 10.9 class, with corrosion-resistant coating for years of use, and convert your M14x1.25 vehicle to M14x1.50 wheel studs.

  • Sale!
    VTT is proud to announce our A90/91 Supra engine catch can set up. This kit uses our already extremely popular modular catch can, and couples it with a custom CNC 6061 bracket, VTT CNC banjo fittings, VTT 5 ply silicone hose, and Push lock fittings. Install is simple, takes about 30 minutes to 2 hours depending on your skill level, and requires removing one factory hose to install the VTT hoses. Giving an OEM fit and finished when installed This catch can fits all known intake variations we have seen, including stock intake. Kit Break down is as follows:
    • One Catch Can
    • One CNC 6061 bracket
    • Two -10 Low Profile CNC Banjo Fittings
    • Two -10 VTT 5-Ply silicone Vacuum hoses
    • Two -10 Push Lock Fittings
    • Two spring clamps
    • Available with an optional Drain fitting, allowing quick draining

  • Sale!
    Need to work on the B58 engine outside of the car? Lift it to put on an engine stand etc? BMW makes an engine lifting tab but it costs $25, and they do not always have them in stock. We made our own, to avoid the high cost, and possibly long wait time. The perfect tool when you want to lift the engine balanced in the place BMW designed for it to be lifted. Made out of coated steel for high strength, long life, and corrosion resistance. Fits all B58 models, and possibly S58

  • VTT is proud to offer our billet replacement for the BMW B58 factory plastic Oil filter housing cap. This cap does away with the weak plastic cap while adding a strong magnet to pull metal from the oil, and some pop/color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. We offer these caps in 4 anodized colors - Red, Black, Blue, and Clear

  • Sale!
    Are you building a single kit for the N54, N55, or S55 platform? The stock studs are usually a little bit short for most single-head flanges, and finding M7 studs is not easy. So we made our own longer studs to combat the issue. Made from 10.9 grade steel, and coated in black oxide, these are the perfect solution to the short stud problem. Sold individually so order the number you need. Stud details are as follows
    • Overall length 47mm (stock 39mm)
    • 3mm shoulder
    • 6mm head which is 5mm hex
    • 14mm short end
    • 24mm long end (stock 15mm)

    Dont forget our M7 copper lock nuts as well to complete the job - https://vargasturbo.com/product/vtt-fab-m7-copper-locking-exhaust-nuts/

  • Improve engine/shifting feel without a huge increase in NVH or high cost! VTT A9X billet motor mount inserts upgrade mounts the way BMW does it, allowing a minimal increase in NVH while stiffening up the engine/shifting feel, and getting rid of excessive engine movement

  • We took our popular Billet G8X strut bars and redesigned them for use on the A90/91 Supra. No metal with ugly carbon overlay. This is a real carbon fiber strut bar with ends are CNC machined from 6061-T6 aluminum or T2 Titanium, and anodized in Black, Red, Blue, or genuine T2 Titanium with a rainbow finish.

  • Tired of getting off the dyno, and having your drivetrain malfunction light on due to a broken plastic ride height bracket? So were we, after we broke 3 of them, we knew it was time to make our own to combat the issue. This bracket is cut from 6061-T6 for strength and anodized black for a long-lasting finish.

  • The Factory B58 TU water neck is plastic and is right in the path of your charge pipe if you lose a connection and it blows off. If this does happen to you it can break the plastic neck emptying your coolant in seconds causing you in the best-case scenario to be stranded, and in the worst-case scenario expensive engine damage. Add some cheap insurance with our Billet Water neck.

  • Looking to go above 45 psi in your BMW-powered vehicle? Looking for a plug-and-play solution? We have you covered with our BMW 5 bar sensor. These will allow 58 psi to be read and are factory plug, and play. Simply remove your old sensor, replace it with the 5 bar, and have your tuner rescale your map values in both your DME tune and your PI tune if applicable. These are GENUINE BMW sensors directly from BMW.

  • Show off your VTT support and get a good laugh from people with our "We Like To Party" License plate bracket. Born from the infamous quote in Talladega nights

  • PFS is proud to offer a true drop-in 800-1000WHP+ capable LPFP for A90/91 Toyota Supras. This LPFP needs NO additional pumps, wiring harnesses, etc etc. It will support up to 800WHP on Ethanol percentages as high as E98 and will support much higher power levels with less E content as long as you have the octane to support it. For the pump, we start with a factory bucket, we modify it extensively to accept our custom PFS Brushless fuel pump. We then re-terminate the factory wiring to accept the new pump. No wiring splices, done the same way the factory does -the right way.

  • Looking to make your A90/91 Supra faster in the 1/4 mile or 1/2 mile racing? Want to run 17", or 15" wheels with a very minor suspension modification? Want to drop 43lbs of unsprung weight off the Rear of the car at the same time? Do not want to break the bank while doing so? Look no further than the VTT "GC" Rear Drag kit for the A90/91 Toyota Supra. This kit will allow you to run the wheel/tire combo you need to drop your ET's all while putting the car on a significant diet over the stock rear brake set up.   Fits all 2020+ Supra, and some G-Series BMW. We have confirmed fitment on M340i

  • VTT is proud to announce its Modular Silicone/Billet intake system for the A90/91 Toyota Supra with the B58TU engine. We invested many hours of testing and fitting this kit to get the best fitment, and highest quality. We are very happy with the results. Full disclosure, the factory intake system as far as the airbox is very good, but the intake tract down to the turbo, is full of twists turns, bellows, etc which can cause flow disruption. It also has a silencer which is a restriction as it bypasses air to quiet the intake sound. By removing all of these, and replacing them with our 3"-3.5" Silicone intake tube either to our 6" cone filter,  the stock airbox, or our Carbon Fiber Airbox lid you are removing all of those, and providing a free-flowing optimized air path from the filter or airbox to the turbo. From our testing we found up to 700WHP, the stock airbox is up to the task if the stock appearance and sound is what you wish. Once you go over 700WHP, we suggest stepping up to the 6" cone with a built-in velocity stack.

  • Building a kit using Mac solenoids to control boost? Need an easy way to mount it? VTT-FAB has you covered with our billet Mac Solenoid brackets. Machined from 6061 billet and anodized in 3 colors, these are the perfect way to mount your Mac valve and look good while doing it. Each kit includes:
    • One Mac Solenoid bracket (3-Port or 4-Port)
    • 2 Allen screws to hold the valve to the bracket
    • M6 Mounting Bolt

  • VTT Cone Filters

    $39.99$49.99
    VTT Cone Filters feature High flow elements with a silicone body and a velocity stack built-in for smooth flow. We offer these filters in a variety of sizes for universal use. These are also replacement filters for VTT intake kits including B58 Gen 1,  TU, Supra, Audi 4.0, N54 Dual Cone filter kit, etc Kit Includes:
    • 1 - Cone Filter
    • 1 - Clamp

  • VTT is proud to announce our B58 TU Billet Valve cover. We created these for the B58 TU owner who wants to add a great look to their engine bay while also getting rid of the stock plastic valve cover which has problematic PCV systems and can crack with higher mileage. We recommend running it with our B58 TU engine catch can kit. Which can be added to the order.  We offer a number of breather choices for extra crankcase venting including our oil cap breather, as well as one-way Stainless breathers. Valve Cover Details:
    • 100% CNC 6061-T6 Aircraft aluminum construction
    • Anodized in a variety of colors
    • Lightweight; 9.7 lbs. (compared to 7.9 lbs for a stock cover - only 1.8 lbs difference)
    • THREE shrouded -10 ORB ports Gives the end-user variety for setting up their Valve Cover and PCV System
    • Only Billet option on the market
    • Available with Titanium or works stock hardware
    Kit includes: 
    • One Billet Valve cover
    • Low Side Vaccum/Boost adapter to Banjo Fitting
    • Choice of Various breather options, VTT catch can add on
    • Choice of hardware (optional)

    Note: Aftermarket manifolds will receive a long hose for the low side, and must be plumbed into the manifold if vacuum is wanted in the crankcase at idle, and cruise.

  • VTT Is proud to offer a seamless Chromoly Driveshaft for the A90/91 Supra. This driveshaft is made from seamless 4130 Chromoly steel and forged 4130 weld ends, and Spicer 1350 Yolks, and U-Joints. All pieces are then precision tig welded, and balanced. We couple the driveshaft with VTT Custom 7075 aluminum adapters which convert the 3 bolt BMW bolt pattern to the 4 bolt Spicer yolk patter. This driveshaft is rated at 4100 ft/lbs of Tq, and more than 10,000RPM.

  • VTT is happy to offer our very unique and universal billet mount to fit any roll bar or cage with  1.5", 1.75", or 2" diameter tubing. These mounts are designed from 6061-T6 aluminum and are made to SECURELY hold a JBL Flip version 3 - Version 6 and allows you to bring music into your race car, off-road vehicle, rock crawler, boat, basically anything that has a length of tubing this will allow you to have an easy way to have tunes without having to install and mount a stereo system. They can also be used as a single mount to hold things such as a helmet, steering wheel, or anything you want to quickly hang for easy access once seated. For the JBL flip you will need TWO mounts, simply install them loosely, snap in your JBL Flip to get the proper spacing, and tighten down. The device is then securely mounted and can be removed easily. We offer these in a variety of anodized colors for a long-lasting durable finish including Black, Red, Blue, Clear, Orange, and Green Mounts are sold individually Features:
    • Billet 6061-T6 Aluminum construction anodized in a variety of colors
    • Can be used to SECURELY mount a JBL Flip 3-6 to anything that has a length of 1.5", 1.75" or 2" tubing
    • Can also be used as a universal mount for anything you need to hang in your race car, off-road vehicle, etc
    • Completely reversible, and can be moved from vehicle to vehicle

  • PFS B58 Port Injection Kit

    $689.99$2,259.99
    Looking for some more fuel for your B58 powered BMW? Not looking to break the bank on overpriced PI kits? PFS has you covered with its Plug, and play PI kit for the B58.

  • Do you work on a lot of BMW engines from various platforms? Do you ever struggle with heavy cylinder heads, either lifting off the engine or simply moving around? Ever ruined an EXPENSIVE multi-layer head gasket while trying to install a cylinder head due to no secure way to hold it without two people? We answered yes to all of those things, and came up with a tool for anyone that works on BMWs often, and needs a way to simply, and easily remove/install, or simply move around a cylinder head. These cylinder head tools are machined from a solid billet of 6061-T6 aluminum and anodized in 4 colors for long-lasting corrosion resistance. They are knurled for a non-slip grip when oily or wet, and positioned so the head is balanced when lifting The Head Handler fits the following engines, N54, N55, S55, B58, S58 and we offer short extensions for installation with no cams/Cam ledges on the head, or long extensions for people that want to install or remove a head with cams still installed. (B58 only requires short extensions)

  • VTT is proud to offer a Phenolic spacer for the BMW B58 platform. When upgrading to an aluminum charge cooler you get the benefit of a better core, and more cooling capacity, but it also comes with the downside of DIRECT heat transfer from the head to the manifold which can cause heat soak and less-than-ideal IAT's even with an upgraded charge cooler. We manufacture these from G11 Expoxy sheet which has great heat and hardness characteristics, and we feel is the ideal material for this application. The thickness is 8mm.  

    Please note: Longer studs or bolts may be required introducing a phenolic spacer into your system

  • Unsure of the state of your CHRA's, whether brand new from a questionable source or rebuilt? DON'T install them without having a proper High-Speed balance done! This is the #1 most critical factor when building a turbocharger, and is even more important for performance turbochargers or small twins that see a LOT of RPM. We use a Turbo Technics VS3 balancer, and balance most units down to under .5G Not all turbos will be able to pass a high-speed balancing test for any number of reasons (usually poor assembly, bent shaft, etc), if they will not pass, we will send you the specs they are in, and as close as we could get them. We then will give you the option to send them back, or we can disassemble, and rebuild them in-house using our other balancing, and assembly tools to ensure a properly built/balanced unit. The service is $79.99 each for most turbos, and we have the capabilities to balance most units. If sending in twins please choose TWO as the quantity

    UNITS MUST BE SENT IN WITH NO HOUSINGS, AND IN A CONDITION READY TO BE BALANCED, IF YOU NEED TO SEND IN COMPLETE TURBOS, WE CAN DISASSEMBLE, AND BALANCE FOR YOU, BUT AN EXTRA CHARGE WILL APPLY. IF THE UNITS ARE SENT IN A CONDITION WHERE THEY CAN NOT BE BALANCED WE WILL LET YOU KNOW THE PRICE TO GET THEM TO A STATE WHERE THEY CAN BE

  • VTT is proud to offer the PFS A90/91 Supra upgraded LPFP line. This line replaces the factory line from the tank to the hard-line under the drivers feet with a line which increases diameter 22%, and volume/area 56% over factory line. The factory line is just under 8mm ID the PFS line uses genuine Parker 801-6 hose which is 10mm ID. This is a plug-and-play option. Remove your factory line, and install this line in its place, it will fit in all the line holders.

  • The Factory B58 TU Upper Cylinder head hose is plastic and is right in the path of your charge pipe if you lose a connection and it blows off. If this does happen to you it can break the plastic neck emptying your coolant in seconds causing you in the best-case scenario to be stranded, and in the worst-case scenario expensive engine damage. Add some cheap insurance with our Billet Upper Cylinder head hose, this sits right above the plastic water neck. Product Details:
    • Plug and play direct factory replacement
    • 6061-T6 Billet aluminum with black anodizing for a corrosion-free life
    • 7-Ply Silicone in 3 colors
    • Cheap insurance against a blown charge pipe which could turn into a blown motor

  • VTT Virtual Gift Card

    $50.00$1,000.00

    Please Note: This is a Virtual Gift Card.  After purchase you will receive an email with your Gift Card code

  • THE DRIVESHAFT for the MK5 Supra! VTT Is proud to offer our Carbon Fiber Driveshaft for the A90/91 Supra made exclusively for us by PST one of the leading names in CF driveshaft technology! This driveshaft is made from 3.25" CF tubing Spicer 1350 Yolks, and U-Joints. All pieces are then bonded using PST's proprietary process, and balanced to within 1/8 In/Ounce. We couple the driveshaft with VTT Custom 7075 aluminum adapters, 4340 Rear end Adapter all which convert the 3-bolt BMW bolt pattern to the 4-bolt Spicer yolk pattern and one heavy-duty CV Joint. ALL OF THE quickest and fastest Supra run this shaft, dont get stuck with a lower-strength broken shaft at the strip. Do it once, do it right for LESS! Made in the U.S.A

  • Looking to make your A90/91 Supra faster in the 1/4 mile or 1/2 mile racing? Want to run 17", (or 15" wheels with suspension modifications), and skinnies in the front? Want to drop OVER 70lbs of unsprung weight off the front of the car at the same time? Do not want to break the bank while doing so? Look no further than the VTT "GC" Front Drag kit for the A90/91 Toyota Supra. This kit will allow you to run the wheel/tire combo you need to drop your ET's all while putting the car on a significant diet over the stock front brake set up. The kit is a true plug-and-play kit using Genuine Wilwood parts, coupled with DOT-approved brake lines, CNC 7075 rotor hats/brackets, and a CEL eliminator harness for the brake sensor. This kit comes in 2 different variations, with two different caliper sizes for each Fits all 2020+ Supra, and some G-Series BMW. We have confirmed fitment on M340i

    Disclaimer: The HD kits are designed for street use, and drag racing. Never use for heavy braking racing environments such as Auto-X or Road Racing. Scalloped kits should never be used for street driving, and are ONE-PASS COOL DOWN DRAG RACING ONLY, EVEN IN THIS ENVIRONMENT, THEY MAY CRACK IF USED TOO AGGRESSIVELY. Always drive within your limits!

  • VTT noticed a hole in the A9X/Z4 market for a high-quality, lightweight, NVH-friendly, and easy-to-install Diff Lock Down kit to improve diff stability under launching, and hard cornering. So we did something about it and went to work on a very innovative design that 100% positively locks the diff down from movement, while shielding it from adding a ton of NVH, and can be used with the stock diff, and subframe bushings. This design uses existing mounting points on the vehicle, you do NOT have to remove the subframe or the Diff to install. Simply remove 4 diff bolts, drill two holes in the subframe slightly bigger, install two M10 riv-nuts, and install the lockdown, you do not even have to move the exhaust. A typical install can be 15-30 minutes for someone who is experienced working on vehicles, an hour if you like taking it slow. You WILL need a Riv-nut tool to install the Riv-nuts, we provide a link below for what we recommend on Amazon. Features:
    • Lightweight 1.5 lbs for the entire lockdown plate
    • Uses FOUR connection points on the Diff, and two on the subframe for the ultimate in positive diff location, this will stop all diff movement on launch, saving your guibos, etc
    • 100% Billet construction from 6061-T6 aluminum
    • Anodized in 4 colors for corrosion resistance, a long-lasting finish, and good looks
    • The subframe does NOT have to be removed for installation
    • Uses all 12.9 grade hardware
    • Does not add excessive NVH
    • Positively locks down the diff to eliminate all unwanted movement under launches, acceleration, cornering, etc.

  • Need a Tee fitting for plumbing Vacuum, or Boost lines, Don't want to use cheap plastic ones that can get soft when hard, and brittle after they heat cycle? We didn't either, which is why we machined these high-quality billet tees to solve this issue. Machine from 6061-T6 aluminum, and anodized in black for a long-lasting corrosion-free finish, these tees look great, and will you never have to worry about one failing. We offer them in two sizes, each size has 12mm legs and 3 barbs:
    • 7.60mm / -4 Push Lock for people looking to use -4 push lock hose or -4 AN hose. This is a perfect fit for those.
    • 1/4" For people looking to use 1/4" vacuum tube

  • B58 CP-CARRILLO FORGED PISTON SET

    $1,419.99$1,469.99
    These are the same premium pistons we use in our winning race and high-performance street engines around the world! We feel that these are the best pistons for your high performance or racing engine.

  • Sale!
    Want to get rid of the plastic oil cap on your Supra, and add some nice billet pop to your engine bay? Look no further than the VTT Billet Oil cap. These are a true Billet oil cap machined from 6061-T6, and anodized in a variety of colors. These are NOT a thin cap that snaps over your existing oil cap. Currently, we offer them in 4 colors

  • Sale!
    VTT is Proud to offer our Billet Aluminum ZF8HP 8-speed Transmission pan. This pan does away with the factory plastic or cast aluminum pan and upgrades it to 6061-T6 aluminum anodized in a variety of colors. This pan increases fluid capacity to 5.7 QTs compared to the stock pan which holds 3.7 QTs, has a US-made reusable Viton Gasket, a rare earth magnet that sits under the filter to not only support it, but pulls metal from the fluid, machined external fins to help aid in cooling, and a -6 ORB magnetic drain plug. Clearance is NOT increased on G8X, X3/4M, or F90 M5, if used on smaller model ZF8HP with the plastic pan, the pan DOES fit but has reduced clearance. Product Features:
    • Billet construction  using 6061-T6 aluminum for long life, and added strength
    • Add a full 2 QTs fluid capacity at 5450ML (5.7QTs) compared to 3500ML (3.7QTs)
    • Machined fins for improved cooling
    • Rare Erath magnet built in to pull metal from the fluid
    • US-Made Viton Gasket
    • -6 ORB magnetic drain plug for easy service

  • Running an open turbo, and want to straight out the airflow to the compressor for extra efficiency. Our billet velocity stack is what you need. Backed by physics a Bellmouth or velocity stack will help smooth the air coming into the turbocharger or on NA cars. These are made from 6061-T6, and anodized in a variety of colors and sizes. Currently, we offer 3", 4", and 5" These are suitable to fit any intake tubing or turbocharger inlet with that size. These are available with or without a silicone connector and clamps. Our V-Stacks are also made to extend down on the outside so you can attach a Vibrant S&B or other compatible 7" Filter on the 3"/4" version. Features:
    • Smooth air before it enters the turbocharger or Intake
    • Very low profile, only sticking 2.5" above the turbocharger inlet. Even if you have no room for a filter these will fit
    • Fits all turbochargers with a 3", 4" or 5" inlet including PTE Sportsman Cover!
    • 3" and 4" version works with Vibrant #10961 7" filter or S&B 1032 Filter  if you have room
    • 100% billet construction for high-strength
    • Anodized for long life, and durability

  • Need to move your coolant expansion tank to the other side of the vehicle for a single turbo kit you are building, extend Map sensor plugs, or IAT, how about Throttle Body? Don't cut your factory wires. Just get a VTT-FAB extension harness, and plug and play! These come in various lengths and are covered in expanded sheathing with heat shrink on both ends for a long-lasting, good-looking finish. Available:
    • Coolant Extension for late model BMW 2015+ 5 ft
    • Pre-Throttle Map sensor extension harness 2 ft
    • Pre-Throttle IAT Sensor extension harness 2 ft
    • B58/S58/B48 etc Throttle body extension harness 2 ft
    • B58 to S55 Throttle conversion/extension harness 2 ft
    • EWG Actuator Extension harness, Various Lengths
    • N54 stock MAP to 3.4 N20 Map sensor extension
     

  • VTT is proud to offer high-performance drop-in replacement filters for the BMW B58 TU, this includes G series BMW including Z4, A90/91 Toyota Suora, and. These filters are custom-made for VTT. They are made with a heat-resistant silicone base, and a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. We designed these to work with our Carbon Fiber intake Tops, but these filters will also work perfectly with the stock tops. We offer them in two colors. Red, and Black Features:
    • 50 States Emissions Legal
    • Easy to install in 15-30 minutes even for a novice
    • Filters can be cleaned forever meaning never buy new filters
    • Completely reversible if you ever want to remove

  • Sale!
    Looking to maximize your A90/91 for drag racing? Want to be able to dial in the perfect amount of compression or rebound on your launch? The VTT Double adjust drag shock kit is just want the doctor ordered!

  • Carrillo connecting rods are well known within pro racing and street performance circles for good reason; they produce a premium product that winning racers around the world depend on.

  • VTT is proud to offer our EWG "Direct Control System" or DCS! This is a completely new innovation for people looking to control the highest-flowing wastegate on the market using an existing BMW electronic actuator. This system will allow BMW owners who have a vehicle with Electronic Wastegates from the factory to utilize this system to control an externally wastegated turbo system, AND it will ALSO allow ANY vehicle to use this setup to control your own custom turbo system. This is done by utilizing our custom 7075 Billet aluminum bracket coupled with a Turbosmart Straight gate, and if needed an EWG controller made for us by DCCD Pro. This allows direct external wastegate control over any turbocharger system with or without EWG for the factory. Features:
    • Utilizes the most current wastegate technology the Turbosmart Straight Gate. This gate allows maximum flow with minimal restriction, low drive pressure, and much more. Full details can be found here - https://www.turbosmart.com/product/electronic-straightgate-esg50-external-wastegate/
    • Can be configured in multiple ways, and angles based on how you mount the adapter
    • The adapter is 7075 Aluminum which has the strength of steel and weight of aluminum
    • All connection fittings, are made from Nitronic 60 which has extremely high temperature and wear properties
    • Zero Drive Pressure, no springs, no poppet valves, direct control over the gate using factory ECU logic
    • Adaptable to ANY turbo system on any car to provide the ultimate in boost control!

  • Looking to adapt your wheel bore size to a smaller hub bore? VTT has you covered with our hub-centric adapters. These adapters are made from Billet 6061-T6 aluminum, and anodized in black. We have these sizes currently
    • 57.1mm hub to 60.1mm wheel bore
    • 57.1mm hub to 64.1mm wheel bore
    • 57.1mm hub to 66.1mm wheel bore
    • 57.1mm hub to 66.6mm wheel bore
    • 57.1mm hub to 67.1mm wheel bore
    • 57.1mm hub to 70.3mm wheel bore
    • 57.1mm hub to 71.6mm wheel bore
    • 57.1mm hub to 72.6mm wheel bore
    • 57.1mm hub to 73mm wheel bore
    • 57.1mm hub to 74mm wheel bore
    • 57.1mm hub to 74.1mm wheel bore
    • 64.1mm hub to 72.6mm wheel bore

    They are sold in sets of two, order TWO SETS for a full car, or one set per axle.

  • Sale!
    VTT is proud to offer a truly plug-and-play line lock kit for select BMW vehicles that does NOT require running wiring inside the car, mounted switches, holes in the dash, etc. Our newly designed and released line lock kits use a 40amp wireless remote control switch with 4 different modes that allow you to tailor your line lock setup exactly as you prefer. You simply install the solenoids, install the harness with the switch which has all the wiring terminated, bleed the brakes, and you are ready for effortless burnouts which will not be interfered with by the DME because you are holding the brakes, nor wear your rear brake pads. You can store the remote anywhere in your vehicle, center console, cup holder, door cup holder, etc., and when you need to do a burnout to heat your race tires it's in arm's reach without running any wiring into the vehicle. Fitment is confirmed for G8X M3/4, A9X Supra - The kit itself including lines, solenoids, etc will fit most all late model BMW Chassis including F8X, F3X, G2X, etc. The main concern will be mounting the wireless switch in the passenger cowl area. The kit includes:
    • Line lock solenoids with weather pack connectors
    • Two Parker 90-degree -3 an fittings
    • Two Stainless Steel adapter fittings
    • Two DOT Approved Stainless Steel brake lines
    • One complete wiring harness
    • One Remote control switch with TWO remotes

  • Skunk2 Ultra Series Stage 1 Camshafts for Toyota Supra MK5/BMW B58TU /// FEATURES • Billet 8660 Alloy Steel Camshafts • Improved Efficiency/Power • Widest Possible Power Band • Smooth Driveability & Idle • Retains Double VANOS + Valvetronic Functionality

  • PTE – Precision Turbochargers

    $2,234.49$4,428.99
    VTT is proud to offer PTE Turbocharger products!

  • VTT is proud to offer 2020+ Toyota Supra Carbon fiber intake lids. BMW did a wonderful job designing these intakes and we have found they are only slightly restrictive at elevated power levels. With this in mind, we decided to just take their cues, and make a factory-style carbon fiber intake top with a high-flow cotton pre-oiled filter. These are 8 layers of 100% carbon, not a single layer wrapped over plastic, and they are 1.3MM thick with our logo vacuum printed onto the tops, with a UV-resistant gloss clear coating. This is not only strong but will resist discoloration for an extended period of time. The filters themselves are made with a heat-resistant silicone base, a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. Filters are available by themselves for a flow upgrade while keeping the stock look here – https://vargasturbo.com/product/vtt-bmw-toyota-b58-tu-high-performance-drop-in-air-filter-upgrade/ Complete CF Lid kit with Silicone intake tube, and billet adapter available here - https://vargasturbo.com/product/vtt-a90-91-supra-modular-silicone-intake-system/

  • Looking to protect your single turbo investment, dont have a ton of room, and need a low profile filter that can flow what you need? VTT Has you covered with our Low Profile Single turbo Air Filters. These filters are custom-made for VTT. They are made with a heat-resistant silicone base, and a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow.  We currently offer them in Black, and 3 flange sizes. 3", 4" and 5" flange. With two filter heights. Tested at over 1200WHP with no loss of power observed. Filter Options - Offered in White, and Black with the following dimensions Short - 3.75" Tall, 7.5" OD Large end, 5" Small end 3", 4", or 5" Flange Tall - 4.5" Tall, 7.5" OD Large end, 5" Small end 3", 4", or 5" Flange

  • Sale!
    Looking to replace your damaged factory BMW Actuator part number - 11658691853 VTT has located and ordered in bulk these actuators, and offer them at a discounted price. These are 100% FACTORY BMW OEM actuators, not aftermarket. Fitment is for the following, but they work to replace basically any BMW Actuator.

  • VTT is proud to offer billet wheel spacers for most Tesla platforms. These spacers are CNC machined from 6061-T6 aluminum and hard anodized black for a long corrosion-free life. We offer them in the below sizes, which fit many platforms including but not excluded to Model 3, Model Y, Model S, and Model X
    • 5x114.3 to 5/114.3 64.1 Bore for Model Y, Model 3 - 15mm, 17.5mm, 20mm, and 25mm
    • 5X120 TO 5/120 64.1 Bore for Model S, Model X - 15mm, 17.5mm, 20mm, and 25mm

    THESE ARE SOLD INDIVIDUALLY, FOR ONE AXLE ORDER TWO, FOR A COMPLETE SET, ORDER FOUR.

    YOU MUST ENSURE  YOU HAVE CLEARANCE IN YOUR WHEEL TO FIT THE ORIGINAL MOUNTING HOLES AS THEY ARE NOT FLUSH WITH THE SPACER.

    PLEASE DOUBLE-CHECK YOUR BOLT PATTERN, AND HUB BORE BEFORE YOU ORDER. INSTALLED SPACERS CANNOT BE RETURNED!

  • VTT Physical Gift Cards

    $50.00$1,000.00

    Give the Gift of VTT! Looking to get your friends, or family some go-fast parts, and no idea what they need, only that they love VTT? Well, our Gift Cards have you covered! They come in $50, $100, $250, $500, and $1000 increments. Each gift card is precision cut out of plastic in the shape of the VTT logo and has the dollar amount and the code on the back. Each gift code is unique and is locked to that card. To redeem simply enter the code during check out it will remove that amount, and if you have any leftover it will go back to the card.

    You can choose to have your card physically mailed to you, or a virtual card where we can send you a scan of your card.

  • Sale!

    TOYOTA B58B30 STROKER KITS

    $7,229.99$7,559.99
    VTT Is proud to offer the BC stroker kit for the Toyota B58B30 engine platform that incorporates a 100mm stroke, steel billet crank, BC 4340 Pro Series Heavy-Duty connecting rods rated to 1600+ horsepower.

Title

Go to Top