-
Looking to go above 45 psi in your BMW-powered vehicle? Looking for a plug-and-play solution? We have you covered with our BMW 5 bar sensor. These will allow 58 psi to be read and are factory plug-and-play. Simply remove your old sensor, replace it with the 5 bar, and have your tuner rescale your map values in both your DME tune and your PI tune if applicable.
These are GENUINE BMW sensors directly from BMW.
PLEASE NOTE: These are GENUINE BMW sensors directly from THE BMW DEALERSHIP, BMW IS PUTTING A BMW STICKER OVER A DENSO BOX, AND SELLING THEM. THESE DO NOT HAVE BMW STAMPS ON THEM. WE HAVE ZERO CONTROL OVER THIS.
-
Looking to protect your single turbo investment, dont have a ton of room, and need a low profile filter that can flow what you need? VTT Has you covered with our Low Profile Single turbo Air Filters. These filters are custom-made for VTT. They are made with a heat-resistant silicone base, and a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. We currently offer them in Black, and 3 flange sizes. 3", 4" and 5" flange. With two filter heights. Tested at over 1200WHP with no loss of power observed. Filter Options - Offered in White, and Black with the following dimensions Short - 3.75" Tall, 7.5" OD Large end, 5" Small end 3", 4", or 5" Flange Tall - 4.5" Tall, 7.5" OD Large end, 5" Small end 3", 4", or 5" Flange
-
Looking to remove your BOV either for leak testing, or dont want to run one, and your charge pipe or housing has a flange on it. You can use this billet plate to block off the BOV flange. Uses the O-ring from the BOV to seal, and removes the BOV. Fitment: Tial BOV Turbosmart BOV with female flange like Tial
-
Need a Tee fitting for plumbing Vacuum, or Boost lines, Don't want to use cheap plastic ones that can get soft when hard, and brittle after they heat cycle? We didn't either, which is why we machined these high-quality billet tees to solve this issue. Machine from 6061-T6 aluminum, and anodized in black for a long-lasting corrosion-free finish, these tees look great, and will you never have to worry about one failing. We offer them in two sizes, each size has 12mm legs and 3 barbs:
- 7.60mm / -4 Push Lock for people looking to use -4 push lock hose or -4 AN hose. This is a perfect fit for those.
- 1/4" For people looking to use 1/4" vacuum tube
-
VTT B58/S58 Head Port Block-Off / Built Check Valve Kit
The VTT B58/S58 Head Port Block-Off / Check Valve Kit is designed to either seal off or convert the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases — but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time.
This kit provides two configuration options:
-
Block-Off Version – Completely seals the factory head ports to prevent oil intrusion and unwanted vacuum leaks.
-
Billet Check Valve Version – Converts the head ports into a robust internal PCV system using precision-engineered check valves. These one-way valves allow vacuum to function as intended while blocking boost pressure from entering the crankcase or charge tract.
By bypassing the factory PCV valve in the valve cover, the VTT kit replaces it with an improved three-valve internal system integrated directly into the cylinder head. This design improves reliability, simplifies plumbing, and ensures consistent crankcase pressure management — critical for both stock and high-performance B58/S58 applications. This kit does NOT require any tapping, meaning no metal to get into the engine etc. You simply tap the plugs or check valves into place.
Key Features
-
Eliminates oil draw-through into the intake manifold
-
Prevents carbon buildup on intake valves
-
Converts to an internal, head-integrated PCV system
-
Utilizes precision-machined check valves for boost sealing
-
Fully reversible — Block-offs or valves can be removed if needed
- No tapping is required. Easy install, by tapping the blocks or valve into place.
-
-
Looking to up your boost limit on just about any BMW vehicle that runs a 3 or 4-wire BMW map sensor including but not limited to S58, B58, N54, N55, S55, S63, B48, B47, B42, B57, B46? We were too, so we decided to make a very easy plug-and-play kit for 3, and 4-wire BMW map sensors. These kits will allow you to completely replace the 3-wire sensor with one of our sensors, leave your stock 4-wire in place for IAT sensing, and move the power, ground, and sensor signal from the factory sensor to our sensor. These sensors have the proper scaling which will allow your tuner to simply change your map sensor scaling in the tune, and the factory ECU will be able to utilize the sensor voltage with no problem. We are offering these in 5 bar (58 psi), and 6 bar (72 psi), and each comes with a plug-and-play harness, and optional fittings for ease of installation.
Note: For the S58/B58 our Factory style Pre-Throttle map sensor is also 5 bar, and will work fine coupled with the post throttle kit, but the scaling is different, if you want matching Voltages Pre/Post throttle you can run two of these.
A variety of install pics can be found below and - Here
Scaling PDF Links: 5-Bar / 6-Bar
Features include:- Plug and Play harnesses with no wire splicing
- Output wire for connecting a PI or external controller to your post-throttle map sensor for the most stable signal that is not affected by throttle closure
- Different fittings are available for your plumbing needs.
- Can have matching voltage signals for pre/post throttle for ease of tuning, and boost reference
- B58/S58 etc Pre Throttle - 3 Wire Harness (Charge pipe to 1/8" NPT adapter needed, for B58/S58 90 degree adapter needed to provide sensor clearance)
- B58/S58 Post Throttle - 4 Wire Harness (Boost reference will be needed from manifold to sensor)
- F90 M5 Pre/Post Throttle - 4 Wire Harness (May need to repin) (Boost reference will be needed from manifold to sensor)
- Most all other platforms Pre/Post Throttle - 4 Wire Harness (May need to repin) (Boost reference will be needed from manifold to sensor)
- B58
- S58
- S63/ S63TU
- N63
- N54
- S55
- N55
- N20
- B46
- B48
- B57
- B47
-
VTT Modular Silicone/Billet Intake System – BMW G2/3/4X B58TU
VTT is proud to announce our Modular Silicone/Billet Intake System for the BMW G2/3/4X platforms equipped with the B58TU engine.
After extensive testing and countless hours of fitting, we’ve created an intake system that delivers both optimized airflow and factory-level fitment.
Why Upgrade?
The factory BMW airbox itself performs well, but the intake tract down to the turbo is full of twists, turns, bellows, and even a built-in silencer that restricts flow and robs power. Our system eliminates these bottlenecks and replaces them with a 3"–3.5" free-flowing silicone intake tube, paired with either:
-
The stock airbox (for OEM appearance and sound), or
-
Our 6" high-flow cone filter with integrated velocity stack (for maximum airflow and sound).
From testing, we’ve confirmed the stock airbox is capable of supporting up to 700WHP. Beyond that, we recommend stepping up to the 6" cone filter system.
-
-
VTT Cone Filters feature High flow elements with a silicone body and a velocity stack built-in for smooth flow. We offer these filters in a variety of sizes for universal use. These are also replacement filters for VTT intake kits including B58 Gen 1, TU, Supra, Audi 4.0, N54 Dual Cone filter kit, etc Kit Includes:
- 1 - Cone Filter
- 1 - Clamp
-
VTT is proud to announce another product in our carbon fiber product line. The BMW F-Series B58 Modular Carbon fiber intakes system! We COMPLETELY do away with the entire factory intake tract, including the accordion hose, the turbo muffler, all of the restrictive bends. We then replaced it with a smooth radius 2.5"-4" Silicone intake pipe with wire impregnated to ensure strength and longevity. This is coupled with our billet intake connection for an OEM-like fit, and finish. We then created a 100% carbon factory-style intake top and coupled it with our high-flow cotton pre-oiled filters. These tops are 8 layers of 100% carbon, not a single layer wrapped over plastic and they are 1.3MM thick with our logo vacuum printed onto the tops, with a UV-resistant gloss clear coating. This is not only strong but will resist discoloration for an extended period of time. The filters themselves are made with a heat-resistant silicone base, a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. But we didn't stop there! For the crowd looking for increased intake sound, we also made this compatible with our 4" Cone filter for increased flow, and much louder intake sound! These are available for stock, AND aftermarket turbos. Filters are available by themselves for a flow upgrade while keeping the stock look here - https://vargasturbo.com/product/vtt-f-series-bmw-b58-high-performance-drop-in-air-filter-upgrade/ Features:
- Completly modular, can switch from Carbon top to Cone filter all using our silicone intake tube
- 50 States Emissions Legal (Carbon fiber top kit only. The Cone filter option is legal for racing use only in California. Always follow all local emissions rules)
- Easy to install 15-30 minutes even for a novice
- A Beautiful Carbon Fiber finish really adds class to the B58 engine bay
- Filters can be cleaned forever meaning never buy new filters
- Completely removes the restrictive stock intake pipe, NOT only the turbo muffler elbow
- Completely reversible if you ever want to remove
-
VTT is proud to offer a Phenolic spacer for the BMW B58 platform. When upgrading to an aluminum charge cooler you get the benefit of a better core, and more cooling capacity, but it also comes with the downside of DIRECT heat transfer from the head to the manifold which can cause heat soak and less-than-ideal IAT's even with an upgraded charge cooler. We manufacture these from G11 Expoxy sheet which has great heat and hardness characteristics, and we feel is the ideal material for this application. The thickness is 8mm.
Please note: Longer studs or bolts may be required introducing a phenolic spacer into your system
-
Glass in your VTT Catch Can broken? If so we have replacements avaialble for $10 each. These are direct replacements for the glass that came with your cans.
-
Looking for a head gasket for your BMW that will hold ALL of the boost? So were we, and nothing we tried worked. So we took matters into our own hands and had what we wanted made. These gaskets are made out of carbon material, and use stainless steel fire rings to ensure you are not pushing boost into your water jacket or between cylinders. There are two versions:
- One does NOT require a groove to be cut into the block
- One DOES require a groove to be machined into the block to accept the fire ring.
- Custom made to our specs from Carbon material that will form your head/deck, and seal oil/water passages while fire rings, keep boost in the combustion chamber
- FULLY tested in-house on multiple builds to ensure boost level can be achieved
- They are NOT like the other fire ring gaskets on the marker (SCE/Athena) that do not require machine work, we had zero luck with those. THESE FLAT OUT WORK!
- Choose non-machined or machined version
- Different thicknesses are available as a custom order (4-8 week lead time)
- Different Bores Available as a custom order (4-8 week lead time)
For any gaskets NOT in stock expect a 4-8 week lead time as these are custom-made for us. This includes ANY gasket we currently do not have in stock.
-
VTT is proud to offer high-performance drop-in replacement filters for the BMW B58 TU, this includes G series BMW including Z4, A90/91 Toyota Suora, and. These filters are custom-made for VTT. They are made with a heat-resistant silicone base, and a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. We designed these to work with our Carbon Fiber intake Tops, but these filters will also work perfectly with the stock tops. We offer them in two colors. Red, and Black Features:
- 50 States Emissions Legal
- Easy to install in 15-30 minutes even for a novice
- Filters can be cleaned forever meaning never buy new filters
- Completely reversible if you ever want to remove
-
VTT is proud to offer high-performance drop-in replacement filters for the F Series BMW B58. These filters are custom-made for VTT. They are made with a heat-resistant silicone base, a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. We designed these to work with our Carbon Fiber intake Tops, but hese filters will also work perfectly with the stock tops. We offer them in two colors. Red, and Black Features:
- 50 States Emissions Legal
- Easy to install 15-30 minutes even for a novice
- Filters can be cleaned forever meaning never buy new filters
- Completely reversible if you ever want to remove
-
VTT-FAB B58 Factory Control EWG Top Mount Single Turbo kit
For BMW G-Series & Toyota A91 6-Port B58 Platforms
VTT-FAB is proud to offer the premiere top-mount single turbo system for the BMW G-Series and Toyota A91 B58 platforms. This kit is 100% made in the USA at our Hayward, CA facility, using only the highest-quality materials and components.
At the core is a hand-fabricated equal-length 321 stainless steel manifold with billet flanges, designed for maximum flow, durability, and that signature 6-into-1 turbo sound. The system is paired with our factory-controlled external wastegate setup, featuring a Turbosmart 60mm Straight Gate. This innovative design allows full external gate control through the OEM ECU — no additional boxes, MAC solenoids, or vacuum/boost lines required. Simply reuse your factory actuator with our adapter for seamless, plug-and-play control from 0 PSI all the way up to your turbo’s limits.
Unlike other kits, the VTT-FAB system uses no silicone couplers. Instead, we provide VTT-FAB HD clamps to eliminate the risk of blown boost hoses under extreme load.
⚠️ Important Notes:
-
Every VTT-FAB kit is built to order and cannot be canceled once fabrication begins. Please order carefully.
-
If your kit of choice is listed out of stock, email [email protected] for current build times.
-
Garrett turbo options are oil-cooled only (no water lines). This is perfectly fine for street and drag applications. For extended track/road-race use, we recommend adding water cooling
-
-
VTT 2019+ BMW G2X Carbon Fiber Intake Lids
VTT is proud to offer carbon fiber intake lids for 2019+ BMW G2X platforms and the Toyota Supra.
BMW did an excellent job designing the factory intake system, and through testing we’ve found it is only mildly restrictive at elevated power levels. With that in mind, we chose to build on BMW’s original design rather than reinvent it—creating a factory-style carbon fiber intake lid paired with a high-flow, reusable cotton filter that maintains stock appearance while improving airflow.
Unlike cosmetic carbon pieces, these intake lids are constructed from 8 full layers of 100% carbon fiber, not a single cosmetic layer wrapped over plastic. Each lid is 1.3 mm thick, vacuum-formed with our VTT logo embedded into the carbon, and finished with a UV-resistant high-gloss clear coat to prevent yellowing and discoloration over time.
The optional high-flow filter features a heat-resistant silicone base and a pre-oiled cotton weave element, designed to capture contaminants while maintaining excellent airflow. Filters are fully serviceable and reusable, eliminating the need for replacements.
For customers wanting airflow improvements while keeping a completely stock appearance, the filter is also available separately here:
https://vargasturbo.com/product/vtt-bmw-toyota-b58-tu-high-performance-drop-in-air-filter-upgrade/
