-
VTT 6 Piston Caliper upgrade (Must own 4 piston kit)
$1,049.99 – $1,109.99 -
VTT 8V RS3 DSG Catch Can
$229.99VTT is proud to announce our 8V RS3 DSG catch can set up. Tired of DSG oil spewing all over your engine on hard launches? this kit will fix that issue at a low price and look great while doing it. What is happening is the fluid gets hot and expands there is a breather on top of the trans, and if the fluid expands enough it is pushed out of the breather up the tube, and out the vent onto your engine. This kit prevents that by allowing the fluid to be pushed up into the can while hot, and drain back into the trans once it cools down. As with our Engine catch can these use our already extremely popular modular catch can, and couples it with a custom CNC 6061 bracket, VTT -6AN to barbed fitting. Install is simple, takes about 15 minutes to an hour depending on your skill level, and requires removing the intake to gain easier access. This is the perfect complement to our RS3 engine side catch can, as they mirror each other in the engine bay. Kit Break down is as follows:- One Catch Can
- One CNC 6061 bracket
- One -6AN to barbed fitting
-
VTT 8V RS3/8S TTRS Silicone Charge pipes
$229.99 – $449.99VTT is proud to offer the very best charge pipe solution for the Audi 8V RS3 platform. This system completely does away with the restrictive, and muli-connection stock charge pipe system, and replaces it with two single 6-ply, Heat Resistant, Wire reinforced silicone charge pipes rated at over 200 psi. They are molded for the perfect fit in your engine bay, while not sacrificing anything in the way of flow or size. They also completely isolate your charge air from any additional heat soak coming in from the engine or ambient heat. -
VTT Audi 2.5TSFI Modular External PCV Plate
$229.99 – $779.99Modifying your Audi 2.5TSFI engine for more power, want to get rid of the problematic PCV set up which is hard to modify, and pulls oil from the crank into the combustion chamber via ports on the cylinder head? Using this plate will close off the factory PCV ports, and allow you to run an external PCV set up of your choice. We made the plate modular so you can use any of our myriad of fittings we already offer for popular BMW PCV systems, and catch cans. Go from mild to wild, and anywhere in between using our fittings, vacuum relieves, and check valves. We also offer complete kits with catch cans, and all hoses, and fittings for a plug, and play system to fully convert your Audi external PCV. -
Sale!
VTT Audi/VW/Porsche Billet Oil Cap
$59.99$54.99Looking to spice up the engine bay of your Audi/VW or Porsche without spending a ton of money. Our Billet Oil caps come in 5 colors and will look great in any engine bay. CNC machined from a billet of 6061-T6 Aircraft aluminum they sport a factory fit and finish with a Viton O-ring for long a leak-free life. They fit a WIDE variety of vehicles and directly replace your factory oil cap. -
Looking to remove your BOV either for leak testing, or dont want to run one, and your charge pipe or housing has a flange on it. You can use this billet plate to block off the BOV flange. Uses the O-ring from the BOV to seal, and removes the BOV. Fitment: Tial BOV Turbosmart BOV with female flange like Tial
-
Sale!
VTT Billet Check Valves
$24.99 – $29.99VTT CNC Billet check valve that can be used for a variety of uses including a vacuum/boost check valve when removing the stock PCV system, and still wanting to run vacuum to the crankcase. Rated at over 100 psi, with a cracking psi of .25psi. -
VTT Billet Crankcase Breather replacement filter
$19.99 – $24.99Need a replacement filter for your VTT Billet Crankcase breather? You can order on here. We offer them in 3 heights, low 48mm, medium58mm, and tall 68mm. This is measured from base to top. The filter will include a new clamp. For reference: N54/55 mostly use the low A90 Supra use Medium Most Audi applications can fit a tall, but measure your filter before ordering. -
Looking to adapt your wheel bore size to a smaller hub bore? VTT has you covered with our hub-centric adapters. These adapters are made from Billet 6061-T6 aluminum, and anodized in black. We have these sizes currently
- 57.1mm hub to 60.1mm wheel bore
- 57.1mm hub to 64.1mm wheel bore
- 57.1mm hub to 66.1mm wheel bore
- 57.1mm hub to 66.6mm wheel bore
- 57.1mm hub to 67.1mm wheel bore
- 57.1mm hub to 70.3mm wheel bore
- 57.1mm hub to 71.6mm wheel bore
- 57.1mm hub to 72.6mm wheel bore
- 57.1mm hub to 73mm wheel bore
- 57.1mm hub to 74mm wheel bore
- 57.1mm hub to 74.1mm wheel bore
- 64.1mm hub to 72.6mm wheel bore
- 66.6mm hub to 72.6mm wheel bore
They are sold in sets of two, order TWO SETS for a full car, or one set per axle.
-
VTT is happy to offer our very unique and universal billet mount to fit any roll bar or cage with 1.5", 1.75", or 2" diameter tubing. These mounts are designed from 6061-T6 aluminum and are made to SECURELY hold a JBL Flip version 3 - Version 6 and allows you to bring music into your race car, off-road vehicle, rock crawler, boat, basically anything that has a length of tubing this will allow you to have an easy way to have tunes without having to install and mount a stereo system. They can also be used as a single mount to hold things such as a helmet, steering wheel, or anything you want to quickly hang for easy access once seated. For the JBL flip you will need TWO mounts, simply install them loosely, snap in your JBL Flip to get the proper spacing, and tighten down. The device is then securely mounted and can be removed easily. We offer these in a variety of anodized colors for a long-lasting durable finish including Black, Red, Blue, Clear, Orange, and Green Mounts are sold individually Features:
- Billet 6061-T6 Aluminum construction anodized in a variety of colors
- Can be used to SECURELY mount a JBL Flip 3-6 to anything that has a length of 1.5", 1.75" or 2" tubing
- Can also be used as a universal mount for anything you need to hang in your race car, off-road vehicle, etc
- Completely reversible, and can be moved from vehicle to vehicle
-
VTT Brake Kits Rotors/Hats only
$109.99 – $249.00This is for those running our brake kits that use our 11.75" or 13" Rotors that want to easily change between rotors for dedicated drag racing and street use. You can now buy Rotor/Hat Assemblies by themselves to switch between any of our 3 options- Scalloped (Recommended Drag use with parachute only)
- VTT HD ( Drag Use, Heavy Street duties, 1/2 Mile events, etc)
The price is for ONE ROTOR / OR ONE ROTOR/HAT ASSEMBLY
-
VTT Carbon Fiber Dragy Holder
$19.99 – $49.00Tired of your Dragy flying all over the car as you try to do runs? Tired of low sats or no sats warning due to improper location of the Dragy in the vehicle? Well say goodbye to those issues with our new Carbon Fiber and Plastic Dragy holders. These are made from either 100% Pre-Preg Carbon Fiber, or molded plastic for a perfect fit. The carbon fiber gives it just the right look to add to your performance vehicle! Each holder has dual Suction cups and will stick to any smooth surface. We suggest mounting them in the upper left or right corner of your windshield with a full view of the sky. Dragy holder features- Stop your Dragy from flying off the dash, and having to search for it
- Position your Dragy in the optimal position for the best satellite coverage
- VTT Dragy holder exposes the entire top of the Dragy so nothing is blocking the receiver from the Satellite
- The charging port is not blocked and can be accessed with the cover on
- Choose from REAL Carbon Fiber or Molded Plastic
-
VTT DAZA/DNWA Billet Intake Manifold
$1,439.99 – $3,089.99Looking to add some power and tq to your DAZA or DNWA powered vehicle? Also, looking to add some bling to your engine bay? Look no further than the VTT Billet Intake manifold. We truly combine function and fashion with this offering. Machined from Billet 6061-T6, with CFD testing used to aid in design, this manifold gets rid of the restrictions in the factory manifold, and throttle elbow, and improves flow through-out the powerband. During our testing, we saw gains of 29WHP/28WTQ at 5500 RPM and 19WHP/14WTQ at 7500RPM. -
Looking to upgrade your stock throttle body elbow with a billet piece with the factory restrictions removed, and add some billet pop while doing so? The VTT Billet throttle body is what you are looking for. Machined from Billet 6061-T6 aircraft aluminum, and anodized in either Clear (Raw aluminum), Black or Red. It also comes with a matching spacer that is the proper width to ensure you can add a Turbosmart Kompact DV, and not have fitment issues. Our Spacer also used O-rings instead of a gasket to avoid having to sandwich two gaskets between the pieces. The spacer has one -6AN port, and one 1/8NPT port for various uses, Boost reference, methanol injection, etc These are a direct bolt-on for either 2017-2018, or 2019+ 8V RS3, and 8S TTRS. Please choose the model you need based on the year of your vehicle, and the color you want.
Don't forget your VTT Silicone charge pipes, and Turbosmart Kompact DV to complete the upgrade!
-
Everything you need to perform a successful install on your 2.5 turbo swap!
