-
Looking to protect your single turbo investment, dont have a ton of room, and need a low profile filter that can flow what you need? VTT Has you covered with our Low Profile Single turbo Air Filters. These filters are custom-made for VTT. They are made with a heat-resistant silicone base, and a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. We currently offer them in Black, and 3 flange sizes. 3", 4" and 5" flange. With two filter heights. Tested at over 1200WHP with no loss of power observed. Filter Options - Offered in White, and Black with the following dimensions Short - 3.75" Tall, 7.5" OD Large end, 5" Small end 3", 4", or 5" Flange Tall - 4.5" Tall, 7.5" OD Large end, 5" Small end 3", 4", or 5" Flange
-
Need a Tee fitting for plumbing Vacuum, or Boost lines, Don't want to use cheap plastic ones that can get soft when hard, and brittle after they heat cycle? We didn't either, which is why we machined these high-quality billet tees to solve this issue. Machine from 6061-T6 aluminum, and anodized in black for a long-lasting corrosion-free finish, these tees look great, and will you never have to worry about one failing. We offer them in two sizes, each size has 12mm legs and 3 barbs:
- 7.60mm / -4 Push Lock for people looking to use -4 push lock hose or -4 AN hose. This is a perfect fit for those.
- 1/4" For people looking to use 1/4" vacuum tube
-
Looking to add some airflow to your 2007.5-2017 stock or modified Cummins diesel? Our "Max-Flow" Air Horn gets rid of the restrictive factory air horn and opens up 100%+ more flow to your engine (flows similar to a Banks Monster Ram). Whether you are just trying to make your stock truck run better or free up much-needed flow with an upgraded truck this is the upgrade for you. We made some great changes to the horn including adding an Us-Made Viton Oring instead of a gasket so you no longer have to try to line up the gasket and the bolts when installing the new air horn which can be a cuss-worthy endeavor, as well as the features below. We offer the DIH4 heater as an option pre-installed Features of the Horn
- Stock Location fitment for plug-and-play install
- Much less restrictive, boost pressure is increased without adding WGDC
- Outflows the stock intake by over 100%
- 4" Inlet for Max-Flow Boost pipes
- 4 1/8" NPT ports for optimal use of Methanol or NOS
- Integrated Viton Gasket to replace the stock gasket (eliminates having to line up the gasket)
- Recommended to be used with our Heater Grid delete kit for max gains - https://vargasturbo.com/product/vtt-billet-heater-grid-delete-dodge-cummins-2007-5-2018/
- This kit is not emissions compliant and is only for use for off-road or race vehicles
- Requires our Silicone Charge (Boost) tubes or other 4" Cold aside boost pipe - https://vargasturbo.com/product/vtt-2013-2018-cummins-6-7l-7-ply-silicone-charge-boost-pipes/
- Cast Max-Flow Airhorn in your choice of color wrinkle Black, or Wrinkle Red
- All hardware needed for the installation
- Brand New #1 injector line
-
VTT Billet Aluminum Valve Cover – Cummins 6.7L (2007–2020)
Performance. Reliability. Function.
VTT is proud to introduce our Billet Valve Cover for 2007–2020 6.7L Cummins engines. Designed for truck owners who want to eliminate the failure-prone factory crankcase filter and plastic valve cover, this high-performance replacement delivers strength, style, and superior crankcase ventilation.
The factory setup is known to crack, leak, and allow excessive crankcase pressure. Our billet aluminum valve cover fixes those issues while cleaning up your engine bay and providing modular ventilation options. You can route a hose under the truck for vent-to-atmosphere operation or pair it with our VTT Billet Catch Can for maximum filtration and oil control.
Available in Red, Black, Blue, or Clear anodized finishes to complement any engine bay.
Key Features
-
100% CNC-machined from 6061-T6 aircraft-grade aluminum
-
Integrated, adjustable billet gas chamber — rotates 90 degrees for flexible hose routing
-
Multiple anodized finish options: Red, Black, Blue, or Clear
-
Modular PCV configuration — vent to atmosphere, recirculate, or run with a catch can
-
Eliminates factory crankcase filter restrictions
-
Enhances under-hood appearance and durability
-
-
VTT is proud to offer the very best EASY-TO-INSTALL charge pipe solution for the 2013-2018 Cummins platform. This system completely does away with the restrictive, and muli-connection stock charge pipe system, and replaces it with two single 7-ply, Heat Resistant, Wire reinforced silicone charge pipes rated at over 250 psi. DON'T struggle trying to install aftermarket hard pipes with 8 clamps, and cuss-worthy space to try to squeeze them in! These are molded for the perfect fit in your engine bay, while not sacrificing anything in the way of flow or size. They also completely isolate your charge air from any additional heat soak coming in from the engine or ambient heat. The stock hot side pipes have many irregular shapes and turns causing turbulence as well as carrying heat.
-
Get the ultimate flow package for your 6.7L Cummins with our Max-Flow Package! Flows up to 700WHP with fueling, and tune!
This kit includes the following, and is a $200+ savings over buying on their own!
-
VTT GC turbocharger
-
VTT " Max-Flow" Cast 4" aluminum air horn
-
VTT Heater Grid Delete kit
-
VTT 300 PSI-rated Silicone Boost pipes
-
Turbocharger install kit
-
