1.510.246.9977|Sales@Vargasturbo.com
  • View Cart
    Select options / Details

    CHRA HIGH-SPEED VSR Balancing Service

    $79.99
    Unsure of the state of your CHRA's, whether brand new from a questionable source or rebuilt? DON'T install them without having a proper High-Speed balance done! This is the #1 most critical factor when building a turbocharger, and is even more important for performance turbochargers or small twins that see a LOT of RPM. We use a Turbo Technics VS3 balancer, and balance most units down to under .5G Not all turbos will be able to pass a high-speed balancing test for any number of reasons (usually poor assembly, bent shaft, etc), if they will not pass, we will send you the specs they are in, and as close as we could get them. We then will give you the option to send them back, or we can disassemble, and rebuild them in-house using our other balancing, and assembly tools to ensure a properly built/balanced unit. The service is $79.99 each for most turbos, and we have the capabilities to balance most units. If sending in twins please choose TWO as the quantity

    UNITS MUST BE SENT IN WITH NO HOUSINGS, AND IN A CONDITION READY TO BE BALANCED, IF YOU NEED TO SEND IN COMPLETE TURBOS, WE CAN DISASSEMBLE, AND BALANCE FOR YOU, BUT AN EXTRA CHARGE WILL APPLY. IF THE UNITS ARE SENT IN A CONDITION WHERE THEY CAN NOT BE BALANCED WE WILL LET YOU KNOW THE PRICE TO GET THEM TO A STATE WHERE THEY CAN BE

  • View Cart
    Select options / Details

    VTT Virtual Gift Card

    $50.00 – $1,000.00

    Please Note: This is a Virtual Gift Card.  After purchase you will receive an email with your Gift Card code

  • View Cart
    Select options / Details

    VTT-FAB Billet Aluminum Vacuum/Boost Tees

    $9.00
    Need a Tee fitting for plumbing Vacuum, or Boost lines, Don't want to use cheap plastic ones that can get soft when hard, and brittle after they heat cycle? We didn't either, which is why we machined these high-quality billet tees to solve this issue. Machine from 6061-T6 aluminum, and anodized in black for a long-lasting corrosion-free finish, these tees look great, and will you never have to worry about one failing. We offer them in two sizes, each size has 12mm legs and 3 barbs:
    • 7.60mm / -4 Push Lock for people looking to use -4 push lock hose or -4 AN hose. This is a perfect fit for those.
    • 1/4" For people looking to use 1/4" vacuum tube

  • View Cart
    Select options / Details

    VTT-FAB Billet Velocity Stack

    $39.99 – $49.99
    Running an open turbo, and want to straight out the airflow to the compressor for extra efficiency. Our billet velocity stack is what you need. Backed by physics a Bellmouth or velocity stack will help smooth the air coming into the turbocharger or on NA cars. These are made from 6061-T6, and anodized in a variety of colors and sizes. Currently, we offer 3", 4", and 5" These are suitable to fit any intake tubing or turbocharger inlet with that size. These are available with or without a silicone connector and clamps. Our V-Stacks are also made to extend down on the outside so you can attach a Vibrant S&B or other compatible 7" Filter on the 3"/4" version. Features:
    • Smooth air before it enters the turbocharger or Intake
    • Very low profile, only sticking 2.5" above the turbocharger inlet. Even if you have no room for a filter these will fit
    • Fits all turbochargers with a 3", 4" or 5" inlet including PTE Sportsman Cover!
    • 3" and 4" version works with Vibrant #10961 7" filter or S&B 1032 Filter  if you have room
    • 100% billet construction for high-strength
    • Anodized for long life, and durability

  • View Cart
    Add to cart / Details

    VTT Mercedes Benz M177/78 “GC” Turbocharger Upgrade

    $4,199.99
    GC Stock-900WHP   Ready to take your M177/178 AMG to the next level?  Don't want to deal with core charges, long lead times, or restrictive factory housings? Look no further! VTT has you covered with our 100% new casting  “GC” turbocharger upgrade. We start by keeping the great design elements of the factory AMG turbochargers and removing the not-so-great ones such as the small factory inlet area, bearing housing oil structure, thrust bearing, and anything else we saw that could be improved upon.  With the basics covered, we stepped it up a level adding in proprietary VTT changes and finished off by having all these parts cast to OE quality.  What this means for you is serious power made easy; GC's are a drop-in turbocharger upgrade that supports  750-800WHP while maintaining near factory spool and all factory connections including oil, water, downpipe, and charge pipe.

  • View Cart
    Select options / Details

    VTT Physical Gift Cards

    $50.00 – $1,000.00

    Give the Gift of VTT! Looking to get your friends, or family some go-fast parts, and no idea what they need, only that they love VTT? Well, our Gift Cards have you covered! They come in $50, $100, $250, $500, and $1000 increments. Each gift card is precision cut out of plastic in the shape of the VTT logo and has the dollar amount and the code on the back. Each gift code is unique and is locked to that card. To redeem simply enter the code during check out it will remove that amount, and if you have any leftover it will go back to the card.

    You can choose to have your card physically mailed to you, or a virtual card where we can send you a scan of your card.

Title

Go to Top