-
VTT is proud to announce our F/G Series B58 engine catch can set up. This kit uses our already extremely popular modular catch can, and couples it with a custom CNC 6061 bracket, VTT CNC banjo fittings, VTT 5 ply silicone hose, and Push lock fittings. Install is simple, takes about 30 minutes to 2 hours depending on your skill level, and requires removing one factory hose to install the VTT hoses. Giving an OEM fit and finished when installed. Our kit stands out from others on the market by using high-quality AN fittings, and VTT Banjo adapters. G series fits all 2019+ G Series 3/4 BMW vehicles with the B58TU engine, F Series fits all 2015+ F3X series BMW vehicles with the B58 engine. May NOT fit all F series as some 2 series chassis may be different.
-
VTT is proud to announce our A90/91 Supra engine catch can set up. This kit uses our already extremely popular modular catch can, and couples it with a custom CNC 6061 bracket, VTT CNC banjo fittings, VTT 5 ply silicone hose, and Push lock fittings. Install is simple, takes about 30 minutes to 2 hours depending on your skill level, and requires removing one factory hose to install the VTT hoses. Giving an OEM fit and finished when installed This catch can fits all known intake variations we have seen, including stock intake. Kit Break down is as follows:
- One Catch Can
- One CNC 6061 bracket
- Two -10 Low Profile CNC Banjo Fittings
- Two -10 VTT 5-Ply silicone Vacuum hoses
- Two -10 Push Lock Fittings
- Two spring clamps
- Available with an optional Drain fitting, allowing quick draining
-
VTT 2019+ BMW G2X Carbon Fiber Intake Lids
VTT is proud to offer carbon fiber intake lids for 2019+ BMW G2X platforms and the Toyota Supra.
BMW did an excellent job designing the factory intake system, and through testing we’ve found it is only mildly restrictive at elevated power levels. With that in mind, we chose to build on BMW’s original design rather than reinvent it—creating a factory-style carbon fiber intake lid paired with a high-flow, reusable cotton filter that maintains stock appearance while improving airflow.
Unlike cosmetic carbon pieces, these intake lids are constructed from 8 full layers of 100% carbon fiber, not a single cosmetic layer wrapped over plastic. Each lid is 1.3 mm thick, vacuum-formed with our VTT logo embedded into the carbon, and finished with a UV-resistant high-gloss clear coat to prevent yellowing and discoloration over time.
The optional high-flow filter features a heat-resistant silicone base and a pre-oiled cotton weave element, designed to capture contaminants while maintaining excellent airflow. Filters are fully serviceable and reusable, eliminating the need for replacements.
For customers wanting airflow improvements while keeping a completely stock appearance, the filter is also available separately here:
https://vargasturbo.com/product/vtt-bmw-toyota-b58-tu-high-performance-drop-in-air-filter-upgrade/ -
PFS Stage Cheap DIY Fuel Pump Upgrade Kit (plus limited Pre-Built units available)
Need more fueling headroom but don’t want to drop big money on a full upgrade? The Stage Cheap DIY kit is exactly what it sounds like — an affordable, effective way to boost your low-pressure fuel pump performance without adding wiring, controllers, or complexity.
This kit repurposes high-quality OEM-based components into a high-flow solution for the A90/A91 Toyota Supra and BMW G-Series platforms (excluding M3/M4 and X3M/X4M).
Key Features:
-
✅ ~50% more flow than a stock LPFP
-
✅ Once assembled, kit is 100% plug-and-play
-
✅ No additional wiring or external controllers required
-
✅ Retains full factory fit and function
-
✅ Ideal for pump gas or E85 builds
-
✅ Built from OEM-quality components
-
✅ A perfect entry-level fueling upgrade
-
-
VTT is proud to offer 2020+ Toyota Supra Carbon fiber intake lids. BMW did a wonderful job designing these intakes and we have found they are only slightly restrictive at elevated power levels. With this in mind, we decided to just take their cues, and make a factory-style carbon fiber intake top with a high-flow cotton pre-oiled filter. These are 8 layers of 100% carbon, not a single layer wrapped over plastic, and they are 1.3MM thick with our logo vacuum printed onto the tops, with a UV-resistant gloss clear coating. This is not only strong but will resist discoloration for an extended period of time. The filters themselves are made with a heat-resistant silicone base, a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. Filters are available by themselves for a flow upgrade while keeping the stock look here – https://vargasturbo.com/product/vtt-bmw-toyota-b58-tu-high-performance-drop-in-air-filter-upgrade/ Complete CF Lid kit with Silicone intake tube, and billet adapter available here - https://vargasturbo.com/product/vtt-a90-91-supra-modular-silicone-intake-system/
-
VTT is proud to offer a truly plug-and-play line lock kit for select BMW vehicles that does NOT require running wiring inside the car, mounted switches, holes in the dash, etc. Our newly designed and released line lock kits use a 40amp wireless remote control switch with 4 different modes that allow you to tailor your line lock setup exactly as you prefer. You simply install the solenoids, install the harness with the switch which has all the wiring terminated, bleed the brakes, and you are ready for effortless burnouts which will not be interfered with by the DME because you are holding the brakes, nor wear your rear brake pads. You can store the remote anywhere in your vehicle, center console, cup holder, door cup holder, etc., and when you need to do a burnout to heat your race tires it's in arm's reach without running any wiring into the vehicle. Fitment is confirmed for G8X M3/4, A9X Supra - The kit itself including lines, solenoids, etc will fit most all late model BMW Chassis including F8X, F3X, G2X, etc. The main concern will be mounting the wireless switch in the passenger cowl area. The kit includes:
- Line lock solenoids with weather pack connectors
- Two Parker 90-degree -3 an fittings
- Two Stainless Steel adapter fittings
- Two DOT Approved Stainless Steel brake lines
- One complete wiring harness
- One Remote control switch with TWO remotes
-
VTT is proud to offer our Pre-Preg Hand Crafted Carbon Fiber engine covers for the S58 engine. These are plug-and-play and snap into the factory mounting studs using the factory rubber mounts. BMW did a fabulous job on the latest engine offerings, but the overuse of plastics leaves the engine bays looking cheap, and unfinished. These carbon fiber engine covers, as well as our carbon fiber strut bars, are the perfect addition for anyone looking to give their engine bay, a polished, and sharp look. Available in Gloss, and Matte finish for the G8X and X3/4M platforms
PLEASE NOTE: MUST REUSE FACTORY EMBLEM
-
Looking for some more fuel for your B58 powered BMW? Not looking to break the bank on overpriced PI kits? PFS has you covered with its Plug, and play PI kit for the B58.
-
PFS is proud to offer a true drop-in LPFP for S55-powered BMWs. This LPFP needs NO additional pumps, wiring harnesses, controllers, etc. Capability is 850whp on E85 and up to 1000whp on race fuel. We start with a factory bucket, we modify it to accept our high-flow brushless fuel pump. We then re-terminate the factory wiring to accept the new pump. No wiring splices, done the same way the factory does -the right way. Every pump is fully tested on our flow bench to ensure proper function before shipping -you're going to be installing a product that has already proven itself. This pump is a true drop-in meaning you pull the factory unit out, install this pump, plug the factory plug into the hat, and you are done. The stock ECU controls the pump fully, and NO tune changes are required to take advantage of it. Installation is easy for the DIY'er, and if you use a performance shop it'll be easy for them -just tell them to remove the old and replace it with new same as factory pump.
-
VTT is proud to offer our EWG "Direct Control System" or DCS! This is a completely new innovation for people looking to control the highest-flowing wastegate on the market using an existing BMW electronic actuator. This system will allow BMW owners who have a vehicle with Electronic Wastegates from the factory to utilize this system to control an externally wastegated turbo system, AND it will ALSO allow ANY vehicle to use this setup to control your own custom turbo system. This is done by utilizing our custom 7075 Billet aluminum bracket coupled with a Turbosmart Straight gate, and if needed an EWG controller made for us by DCCD Pro. This allows direct external wastegate control over any turbocharger system with or without EWG for the factory. Features:
- Utilizes the most current wastegate technology the Turbosmart Straight Gate. This gate allows maximum flow with minimal restriction, low drive pressure, and much more. Full details can be found here - https://www.turbosmart.com/product/electronic-straightgate-esg50-external-wastegate/
- Can be configured in multiple ways, and angles based on how you mount the adapter
- The adapter is 7075 Aluminum which has the strength of steel and weight of aluminum
- All connection fittings, are made from Nitronic 60 which has extremely high temperature and wear properties
- Zero Drive Pressure, no springs, no poppet valves, direct control over the gate using factory ECU logic
- Adaptable to ANY turbo system on any car to provide the ultimate in boost control!
-
VTT ultimate E8/9X ultimate rear brake conversion kit VTT is happy to announce its new rear brake conversion kits for the E8X/E9X platforms. We take what already exists on the market, and make it much more complete, and much more performance-oriented while keeping the clearance for those 15” wheels. This kit replaces your rear brake rotors and calipers to fit 15″ wheels. It includes lightweight VTT calipers to go from the single-piston factory caliper to race-inspired 4-piston calipers. While dropping up to a whopping 20 LBS of unsprung weight off the back of your vehicle!
Pictures are for REFERENCE ONLY. All kits will come with varying hardware, brackets, and mounting styles based on the platform.
-
PFS is proud to offer a true drop-in 800-1000WHP+ capable LPFP for A90/91 Toyota Supras. This LPFP needs NO additional pumps, wiring harnesses, etc etc. It will support up to 800WHP on Ethanol percentages as high as E98 and will support much higher power levels with less E content as long as you have the octane to support it. For the pump, we start with a factory bucket, we modify it extensively to accept our custom PFS Brushless fuel pump. We then re-terminate the factory wiring to accept the new pump. No wiring splices, done the same way the factory does -the right way.
-
VTT ultimate F3X ultimate rear brake conversion kit
VTT is happy to announce its new rear brake conversion kits for the F3X platforms. This is the FIRST and only kit currently on the market that will allow 15" wheels and tires to be run on the rear. This kit replaces your rear brake rotors and calipers to fit 15" wheels. It includes lightweight VTT calipers to go from the single-piston factory caliper to race-inspired 4-piston calipers. At the same time, dropping up to a whopping 20 LBS of unsprung weight off the back of your vehicle!
Pictures are for REFERENCE ONLY. All kits will come with varying hardware, brackets, and mounting styles based on the platform.
-
Looking for a head gasket for your BMW that will hold ALL of the boost? So were we, and nothing we tried worked. So we took matters into our own hands and had what we wanted made. These gaskets are made out of carbon material, and use stainless steel fire rings to ensure you are not pushing boost into your water jacket or between cylinders. There are two versions:
- One does NOT require a groove to be cut into the block
- One DOES require a groove to be machined into the block to accept the fire ring.
- Custom made to our specs from Carbon material that will form your head/deck, and seal oil/water passages while fire rings, keep boost in the combustion chamber
- FULLY tested in-house on multiple builds to ensure boost level can be achieved
- They are NOT like the other fire ring gaskets on the marker (SCE/Athena) that do not require machine work, we had zero luck with those. THESE FLAT OUT WORK!
- Choose non-machined or machined version
- Different thicknesses are available as a custom order (4-8 week lead time)
- Different Bores Available as a custom order (4-8 week lead time)
For any gaskets NOT in stock expect a 4-8 week lead time as these are custom-made for us. This includes ANY gasket we currently do not have in stock.
-
Looking to maximize your F or G Series BMW for drag racing? Want to be able to dial in the perfect amount of compression or rebound on your launch? The VTT Double adjust drag shock kit is just want the doctor ordered!
-
Looking to maximize your A90/91 for drag racing? Want to be able to dial in the perfect amount of compression or rebound on your launch? The VTT Double adjust drag shock kit is just want the doctor ordered!
-
VTT “GC” Front Drag Kit – A90/91 Toyota Supra / G Series BMW
Looking to make your A90/91 Supra faster in the ¼ mile or ½ mile? Want to run 17” wheels (or even 15” with suspension modifications) and front skinnies? How about shedding nearly 70 lbs of unsprung weight from the front of the car — without breaking the bank?
Look no further than the VTT “GC” Front Drag Kit. This kit is designed specifically for drag racing, giving you the wheel/tire setup you need to drop ETs while putting your Supra on a serious diet compared to the heavy OEM front brakes.
Pictures are for REFERENCE ONLY. All kits will come with varying hardware, brackets, and mounting styles based on the platform.
-
VTT “GC” Rear Drag Brake Kit
A90 / A91 Toyota Supra
Looking to make your A90/A91 Supra quicker in the 1/4-mile or 1/2-mile?
Want to run 17” or even 15” rear wheels with only minor suspension modification?
Want to drop up to 35 lbs of unsprung weight from the rear of the car — without breaking the bank?
The VTT “GC” Rear Drag Kit is designed specifically for straight-line performance. This kit allows you to run the wheel and tire combination you need to lower ETs while significantly reducing rotational and unsprung mass compared to the factory rear brake setup.
Less weight.
More clearance.
Better weight transfer.
Faster passes.
Fitment
-
2020+ Toyota Supra A90/A91 (B58 platform)
-
Confirmed fitment on many BMW G-Series chassis, including G20, G42, and others.
(Contact us to confirm your specific chassis.)
Notes
-
Minor suspension modification may be required for certain wheel/tire combinations.
-
Photos shown are for reference only.
-
Hardware, brackets, and mounting configurations may vary by platform.
-
-
VTT “Ultimate” Front Drag Brake Kit
E-Series & F-Series BMW
Looking to make your E or F-Series BMW faster in the 1/4-mile or 1/2-mile?
Want to run 17" or even 15" front wheels?
Want to drop OVER 54 lbs of unsprung weight off the nose of the car while improving weight transfer — without breaking the bank?
The VTT Ultimate Front Drag Kit is engineered specifically for straight-line performance. This system allows you to run the wheel and tire combination needed to lower ETs while dramatically reducing unsprung and rotational mass compared to the factory steel front brake setup.
Less weight.
This kit comes in 1 variation, with two different caliper Options for each. We HIGHLY suggest 6-piston Calipers for street driving and 1/2 mile racing. These calipers will drop weight, AND be a braking upgrade over stock calipers.
More clearance.
Better weight transfer.
Faster passes.Pictures are for REFERENCE ONLY. All kits will come with varying hardware, brackets, and mounting styles based on the platform.
-
Out of stockVTT Is proud to offer a seamless Chromoly Driveshaft for the A90/91 Supra. This driveshaft is made from seamless 4130 Chromoly steel and forged 4130 weld ends, and Spicer 1350 Yolks, and U-Joints. All pieces are then precision tig welded, and balanced. We couple the driveshaft with VTT Custom 7075 aluminum adapters which convert the 3 bolt BMW bolt pattern to the 4 bolt Spicer yolk patter. This driveshaft is rated at 4100 ft/lbs of Tq, and more than 10,000RPM.
-
VTT Billet Aluminum Valve Cover – B58 Gen 1
Performance, Reliability, and Style for the B58 Gen 1 Platform
VTT is proud to introduce our B58 Gen 1 Billet Aluminum Valve Cover, engineered for enthusiasts seeking both performance and reliability. This cover replaces the factory plastic unit, which is known to crack and incorporates a restrictive PCV system. Our billet design eliminates those weaknesses while giving you complete control over your crankcase ventilation setup.
We recommend pairing this valve cover with the VTT B58 Catch Can Kit for maximum performance and crankcase pressure management. Additional breather options—including our oil-cap breather and one-way stainless breathers—are also available to fine-tune your configuration.
Key Features
-
100 % CNC-machined 6061-T6 aircraft-grade aluminum
-
Multiple anodized color options, with custom finishes available
-
Lightweight design – 9.7 lbs (vs. 7.9 lbs for the stock cover)
-
Fully baffled internal system to minimize oil carryover
-
Fully modular PCV configuration for complete ventilation control
-
The only billet valve-cover option currently available for B58 Gen 1
-
-
VTT is happy to carry GSC Power Division Gen 2 B58 Camshafts! GSC Power-Division billet cams for the BMW B58B30C Double Vanos, Valvetronic (variable lift) power plant of the 2018-2024 MKV Toyota Supra and 2018-2024 BMW B58 G-body vehicles. GSC Stage 1, 2, and 3 Camshafts for BMW Gen 2 B58 are the quintessential camshaft for the platform and will provide the greatest power gains for your B58 build! Couple your camshafts with GSC Beehive Springs, and retainers, and if building the head we recommend GSC intake/exhaust valves, guides, and stem seals.
Full Cam specs can be found below
PLEASE NOTE: WITH STAGE 2 AND STAGE 3 CAMS UPGRADED VALVE SPRINGS ARE REQUIRED!
-
These are the same premium pistons we use in our winning race and high-performance street engines around the world! We feel that these are the best pistons for your high performance or racing engine.
