1.510.246.9977|Sales@Vargasturbo.com
VTT A9X, G42, G2X Front Bushing Insert Kit
VTT A9X, G42, G2X Front Bushing Insert Kit - Image 2
VTT A9X, G42, G2X Front Bushing Insert Kit - Image 3
VTT A9X, G42, G2X Front Bushing Insert Kit - Image 4
VTT A9X, G42, G2X Front Bushing Insert Kit - Image 5

VTT A9X, G42, G2X Front Bushing Insert Kit

$262.49

31 in stock (can be backordered)

-

Want to tighten up the diff on your A9X Supra, G42 2 series, or G2X BMW and help eliminate any extra diff movement on hard launches or cornering? We got you covered with our Billet diff inserts. They are machined from 6061-T6, and anodized black for a long-lasting finish. They install easily by removing the diff bolts one at a time, lowering the diff slightly, inserting the bushing, and installing new washers, and bolts.

Kit includes:

  • 2 Front inserts
  • 2 Rear inserts
  • 2 Hardened 46mm washers
  • 2 110mm M12x1.5 Bolts

All products that are designed to stiffen or reduce drivetrain movement inherently have the tendency to increase NVH or Noise, Harness, or vibration. While these bushings inserts have been found to add little NVH in most instances. Your results and sensitivity to NVH may vary. This product is designed to reduce drivetrain movement, and that was the goal when designing and manufacturing this product. Returns for NVH are not accepted once products are installed.

31 in stock (can be backordered)

Warranty: 12 Months

Dont forget your Rear Insert kit!

IMG_3721

VTT A9X, G8X, G42, G2X Rear Bushing Insert Kit

Want to tighten up the diff on your 2021+ G8X M3/M4, A9X Supra, G42 2 Series, or G2X BMW and help eliminate any extra diff movement on hard launches? We got you covered with our Rear Billet diff insert kit. This is pressed into the factory bushing and fills the voids in the bushing. This keeps the stock bushing ride compliance but removes any unwanted movement. These are sold as a kit. To install remove the rear diff bushing, use the stock bolt in press the bushing in, and then replace it with the new bolt washer, and lock nut!

Kit includes:

  • One Billet Bushing insert
  • Two 46mm Hardened Steel Washers
  • One 12.9 M14 Bolt
  • One M14 Lock nut

THIS KIT MAY REQUIRE LOWERING OF THE SUBFRAME TO GET THE STOCK BOLT OUT, AND THE NEW ONE  IN

All products that are designed to stiffen or reduce drivetrain movement inherently have the tendency to increase NVH or Noise, Harness, or vibration. While these bushings inserts have been found to add little NVH in most instances. Your results and sensitivity to NVH may vary. This product is designed to reduce drivetrain movement, and that was the goal when designing and manufacturing this product. Returns for NVH are not accepted once products are installed.

DOES NOT INCLUDE DIFF BUSHING IN PHOTO!

SKU: VTT-A9X-G42-FRONT-INSERTS Categories: , , , , , , , , ,

Description

Want to tighten up the diff on your A9X Supra, G42 2 series, or G2X BMW and help eliminate any extra diff movement on hard launches or cornering? We got you covered with our Billet diff insert kit. The inserts are machined from 6061-T6, and anodized black for a long-lasting finish. They install easily by removing the diff bolts one at a time, lowering the diff slightly, inserting the bushing, and installing new washers, and bolts.

Kit includes:

  • 2 Front inserts
  • 2 Rear inserts
  • 2 Hardened 46mm washers
  • 2 110mm M12x1.5 Bolts

Please note: A slight increase in NVH may be noticed from this product as it stiffens up the rear end, and removes some of the sound dampening of the rubber bushings

Fitment Guide

Toyota:

  • A90 Supra
  • A91 Supra

BMW:

Additional information

Weight 1 lbs
Dimensions 12 × 9 × 1 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products

Go to Top