-
Racing can be rough on brake pads, if you have worn through a set of pads while using your VTT brake kit you can buy replacement pads here. Different options are available as shown below. Please take a look at your pads to see the hole orientation which will determine your pad type BP-10 pads for Dynalite calipers Single hole in the pads for the location pin - Mostly street and some racing we recommend for rear kits BP-20 pads for Dynalite calipers Single hole in the pads for the location pin - More aggressive street driving, and racing recommended for front or rear kits BP-10 pads for Dynapro calipers with twin holes in the pads for the location pins - Mostly street and some racing we recommend for rear kits BP-20 pads for Dynapro calipers with twin holes in the pads for the location pins - More aggressive street driving, and racing are recommended for front or rear kits Hawk PC (Performance Ceramic) Very Quiet, Very low dust, Hawk claims 32% increase in stopping power over stock pads. A good balance of street, and aggressive driving. Recommended for front or rear kits
MANY MORE AGGRESSIVE BRAKE PAD COMPOUNDS EXIST FROM VARIOUS MANUFACTURERS, AND YOU CAN TAILOR TO YOUR NEEDS. Y OU CAN FIND THESE BY USING THE CALIPERS STYLE NUMBERS BELOW.
6-PISTON DYNAPRO PAD STYLE 6712
4-PISTON DYNAPRO PAD STYLE 7812
-
Tired of your Dragy flying all over the car as you try to do runs? Tired of low sats or no sats warning due to improper location of the Dragy in the vehicle? Well say goodbye to those issues with our new Carbon Fiber and Plastic Dragy holders. These are made from either 100% Pre-Preg Carbon Fiber, or molded plastic for a perfect fit. The carbon fiber gives it just the right look to add to your performance vehicle! Each holder has dual Suction cups and will stick to any smooth surface. We suggest mounting them in the upper left or right corner of your windshield with a full view of the sky. Dragy holder features
- Stop your Dragy from flying off the dash, and having to search for it
- Position your Dragy in the optimal position for the best satellite coverage
- VTT Dragy holder exposes the entire top of the Dragy so nothing is blocking the receiver from the Satellite
- The charging port is not blocked and can be accessed with the cover on
- Choose from REAL Carbon Fiber or Molded Plastic
-
VTT is proud to offer billet wheel spacers for most Tesla platforms. These spacers are CNC machined from 6061-T6 aluminum and hard anodized black for a long corrosion-free life. We offer them in the below sizes, which fit many platforms including but not excluded to Model 3, Model Y, Model S, and Model X
- 5x114.3 to 5/114.3 64.1 Bore for Model Y, Model 3 - 15mm, 17.5mm, 20mm, and 25mm
- 5X120 TO 5/120 64.1 Bore for Model S, Model X - 15mm, 17.5mm, 20mm, and 25mm
THESE ARE SOLD INDIVIDUALLY, FOR ONE AXLE ORDER TWO, FOR A COMPLETE SET, ORDER FOUR.
YOU MUST ENSURE YOU HAVE CLEARANCE IN YOUR WHEEL TO FIT THE ORIGINAL MOUNTING HOLES AS THEY ARE NOT FLUSH WITH THE SPACER.
PLEASE DOUBLE-CHECK YOUR BOLT PATTERN, AND HUB BORE BEFORE YOU ORDER. INSTALLED SPACERS CANNOT BE RETURNED!
-
VTTEV is proud to offer US-made D.O.T-approved brake lines for the Model 3/Y. These are plug-and-play, and we offer them in Front only, Rear Only, and Front and Rear. Line sets include:
- 2 or 4 lines depending on kit choice
- Banjo Bolts and coppers
- Retaining clips
- Motul RBF600
- Motul RBF660
- Endless RF650
-
Tesla engineered 4 distinct locations on their vehicles to accept specialized pucks to aid in lifting. VTTEV has manufactured these pucks out of high strength Polymer with an O-ring fit to ensure you lift your Tesla properly from the lifting points every time, and save you money over buying the pucks from Tesla! Kit includes:
- 4 VTTEV lifting pucks
- VTTEV screen printed Padded carry case
EVERY VTTEV LIGHTWEIGHT RANGE-EXTENDING BRAKE KIT GETS A FREE SET OF LIFTING PUCKS!
-
VTTEV is proud to offer our rear lightweight two-piece rear brake rotors for the Tesla Model 3/Y. These are made from custom High Carbon VTTEV rotors, and 2 piece 7075 Aluminum brake hats. These fit the stock calipers and bolt right no with no other modification. These offer 7 lbs of rotating mass reduction for an increase in range, and performance. If coupled with our Ultimate front brake kits. We drop almost 40 lbs of unsprung weight and 30 lbs of rating mass reduction. These are the same brake components we have tested at the highest level of motorsports with our BMW Drag racing program, and we also run them on all our street cars. These are great for the daily driver looking to increase range, or the EV racer looking to drop weight to increase performance.
Kit Includes:- Two Rear 335mm High Carbon Brake Rotors
- Two 7075 Aluminum Rotor hats
- Optional - Stainless Steel lines
Please see below for FULL weight information and FULL range testing data!
The kit is a true plug-and-play kit using Genuine VTTEV rotors and CNC 7075 rotor hats
Fitment Guide:- Tesla Model 3P / Tesla Model YP Pre 8/15/22
PLEASE NOTE, THAT PADS MUST BE BEDDED PROPERLY TO GET FULL BRAKING FROM THE KIT, IF YOU DO NOT BED THE PADS PROPERLY YOU MAY ONLY GET 30-50% OF THE BRAKING ABILITY. IF YOU GLAZE THE PADS YOU MUST REMOVE THE ROTOR, SAND THEM DOWN, AND THEN REBED. THIS IS VERY IMPORTANT!
-
Looking to extend the range of your Tesla Model 3/Y by 20%, while increasing braking performance? The VTT lightweight front brake kit drops almost 32 lbs of unsprung weight, and 21.2 lbs of rotating mass from the front of your Tesla. Add our rear lightweight two-piece rear brake rotors for another 7 lbs of rotating mass reduction for almost 40 lbs of unsprung weight, and 30 lbs of rotating mass reduction. These are the same brake components we have tested at the highest level of motorsports with our BMW Drag racing program, and we also run them on all our street cars. This truly is the perfect match for the daily driver looking to increase range, or the EV racer looking to drop weight to increase performance.
Please see below for FULL weight information and FULL range testing data!
Please note: This is NOT a Big Brake kit. This kit is designed to increase braking performance WHILE increasing range by dropping weight.
The kit is a true plug-and-play kit using Genuine VTT parts, coupled with DOT-approved brake lines, CNC 7075 rotor hats/brackets
Each set of VTTEV Brakes includes a free set of VTTEV lifting pucks if desired. See drop down
Fitment Guide:- Tesla Model 3P / Tesla Model YP Pre 8/15/22
- VTTEV Custom 335mm" HD Rotors
- Genuine VTTEV 6-Piston Calipers in 3 colors
- Genuine VTTEV Street or Race Brake Pads
- DOT Approved Brake lines
- VTTEV CNC Rotor Hats
- VTTEV CNC Brackets
PLEASE NOTE, THAT PADS MUST BE BEDDED PROPERLY TO GET FULL BRAKING FROM THE KIT, IF YOU DO NOT BED THE PADS PROPERLY YOU MAY ONLY GET 30-50% OF THE BRAKING ABILITY. IF YOU GLAZE THE PADS YOU MUST REMOVE THE ROTOR, SAND THEM DOWN, AND THEN REBED. THIS IS VERY IMPORTANT!
